4 - Fixed more instances of "invalid parameter" errors on some EFIs.
6 - Improved Secure Boot detection in install.sh.
8 - install.sh should no longer complain when copying Shim or MokManager over
14 - Removed special case of ignoring an HFS+ name of "HFS+ volume", since the
15 old rEFInd HFS+ driver that produced this name for all HFS+ volumes has
16 long since been updated to deliver a real name.
18 - Addition of new Windows 8 OS icon. On Macs and for BIOS/legacy boots, the
19 new icon is now used for Windows Vista, 7, and 8, while the old one is
20 used for earlier versions of Windows. For EFI-mode boots, the new icon is
23 - If the NTFS driver is loaded, rEFInd now scans NTFS volumes on Macs for
24 the presence of Windows boot files, and removes any NTFS volume that
25 lacks such files from the BIOS/legacy boot list. This should help
26 unclutter the display on Macs that contain NTFS data partitions.
28 - Fixed bug that caused misidentification of both whole disks and NTFS
29 volumes as being FAT. (This bug affected the identification of devices
30 and locations in the rEFInd menu, not actual access to devices.)
32 - Code refactoring to clear out legacy-boot functions from the
33 ever-expanding refind/main.c file.
35 - Added new "badges" option to the "hideui" token in refind.conf. This
36 option hides the device-type badges associated with the OS boot options.
38 - Reverted rEFIt commit r472, introduced in rEFInd 0.8.5 to support more
39 BMP images because I've received bug reports that it's causing existing
40 selection images to fail to load.
42 - Fixed install.sh bug that caused misidentification of installation
43 directory under OS X if an already-mounted ESP has spaces in its path.
45 - Fixed Mac-specific install.sh bug that could cause misidentification of
46 the ESP on disks with partition numbers of 10 or above.
52 - Added NTFS EFI filesystem driver.
54 - Minor improvements to filesystem driver framework code.
58 - Fixed bug in Btrfs driver's address reference.
60 - Improved install.sh to make it smarter about figuring out where to
61 install on Macs. Specifically, this version now upgrades existing
62 installations, if found (as it always has under Linux), rather than
63 blindly install to EFI/BOOT; it installs to EFI/refind if not existing
64 installation is found; it installs using the --shortform option to bless,
65 which seems to eliminate the 30-second delay problem; and it can handle
66 an HFS+ ESP, which it treats as a separate HFS+ volume (as if the user
67 had used --ownhfs). These changes do not affect behavior under Linux.
69 - Added missing check of architecture type for several tools.
71 - Applied rEFIt commit r472, which adds support for BMP images with negative
72 height fields, indicating that the image is NOT vertically flipped. This
73 commit and r467 were not incorporated in the original rEFInd because I
74 forked it from a Debian rEFIt package that had been patched to build
75 under GNU-EFI, and was apparently based on a slightly earlier version.
77 - Applied rEFIt commit r467, which improves Mac handling of legacy boots
78 from other than the first hard disk.
84 - Tweaked default for dont_scan_volumes: Removed "Recovery HD". This change
85 better suits the needs of OS X 10.10 ("Yosemite") installations, but may
86 result in some stray Recovery HD entries on some Macs.
88 - Updated icons for Fedora and Ubuntu and added an icon for Xubuntu.
90 - Added new configuration option, "enable_and_lock_vmx", which sets an
91 Intel CPU feature that's required for some types of virtualization to
92 work. Most EFIs enable setting this feature in their own setup utilities,
93 but some (such as most Macs) don't.
95 - If rEFInd can't locate an icons directory (either the default or one
96 specified by the icons_dir token), the program switches to text-only
99 - If a loader contains the string "grub" and no other clue to the loader's
100 OS association exists, search for os_grub.{png|icns} (which is not
101 provided with rEFInd) or os_linux.{png|icns}. (Previous versions provided
102 a generic loader icon for GRUB.)
104 - Fixed bug that caused dont_scan_files to not work with special-case
105 boot loaders (for OS X and Windows) when specifying the complete path to
106 the loader (e.g., EFI/Microsoft/Boot/bootmgfw.efi).
108 - Added support for the iPXE network boot tool (see BUILDING.txt for
109 building and basic use instructions).
114 - Added new feature: Setting "timeout = -1" in refind.conf causes rEFInd to
115 immediately boot the default option UNLESS a keypress is in the buffer
116 when rEFInd launches. In that case, if the keypress corresponds to a
117 shortcut key, the associated boot loader is launched; or if not, the menu
120 - Added new icons for Clover boot loader and for Mythbuntu Linux
123 - rEFInd now displays the partition's label, when one is available, when
124 offering a BIOS-mode boot option for a partition with no filesystem
125 driver. This works only on Macs doing BIOS-mode booting.
127 - Removed GPLv2 code from the FSW core files. This was done because the
128 Btrfs driver is derived from the GRUB Btrfs driver, which is licensed
129 under the GPLv3. Ironically, the GPLv2 and GPLv3 are incompatible
130 licenses, so ensuring that the Btrfs driver doesn't rely on GPLv2 code
131 was legally necessary. In most cases, I reverted to the original rEFIt
132 code, although I kept my own cache code; since I wrote it, I can
133 change its license to a BSD license.
135 - Fixed bug that caused rEFInd to unload drivers immediately after loading
136 them. This didn't affect rEFInd's own drivers because they didn't include
137 the unload hooks, but it did affect some other drivers.
139 - Changed default scan_all_linux_kernels setting from "false" to "true",
140 and commented the option out in refind.conf-sample. This should not
141 affect most people, since refind.conf-sample had this option commented
142 out, and most rEFInd users either use it that way or don't have Linux
143 kernels installed at all. I've made this change because I want rEFInd to
144 "do the right thing" by default in as many cases as possible. For a while
145 now, rEFInd has been excluding non-bootable files from its menu, and most
146 kernels "in the wild" now include the EFI stub. Thus, enabling this
147 support by default seems worthwhile. If you prefer to not scan Linux
148 kernels by default, simply uncomment the "scan_all_linux_kernels" line
149 and ensure it's set to "false".
154 - Removed stray bit of debugging code that caused a prompt to press a
155 key to appear at rEFInd startup.
160 - Changed behavior when default_selection is not set: It now boots the
161 previously-booted loader, assuming it's still available; if not, rEFInd
162 boots the first loader (as it does now). Behavior is unchanged if
163 default_selection is set. Note that this behavior depends on the ability
164 of rEFInd to store an EFI variable in NVRAM. It therefore fails on
165 systems with flaky NVRAM storage. You can view the previously-booted
167 /sys/firmware/efi/efivars/PreviousBoot-36d08fa7-cf0b-42f5-8f14-68df73ed3740
168 variable under Linux.
170 - Added icon for Mageia Linux (os_mageia.png).
172 - Fixed bug that could misidentify a not-quite-GUID as a GUID in a
173 manual boot stanza's "volume" line.
175 - I've updated my personal build system, and therefore the rEFInd Makefiles
176 and related files, to use TianoCore UDK2014 rather than UDK2010.
178 - Added "deep_uefi_legacy_scan" token. When not set (the default), rEFInd
179 does not modify EFI NVRAM settings when scanning for BIOS-mode boot
180 loaders on UEFI-based (non-Mac) computers. Some computers require
181 uncommenting this setting for rEFInd to reliably detect some BIOS-mode
182 boot devices. Passing "0", "off", or "false" as an option resets it to
183 the default value (useful in a loaded secondary configuration file to
184 override a setting in the main file).
189 - Fixed bug that could cause rEFInd to fail to detect boot loaders stored
190 on the root directory of a partition.
192 - Added two new bitmap fonts to those distributed with rEFInd: Ubuntu Mono
193 and Nimbus Mono. Both come in 12-, 14-, 16-, and 24-point sizes.
195 - Messages about pauses for scanning and re-scanning of boot loaders are
196 now suppressed when doing an initial delayed scan when scan_delay is 1
199 - Improved centering of legacy boot option descriptions on some systems'
202 - Fixed bug that could cause a BIOS-mode boot to boot from an inappropriate
203 device if that device had an innately high boot priority (as set by the
206 - Changed icons from ICNS to PNG form. There are several reasons to do
207 this, all of them minor; but together they're enough to warrant a change.
208 PNG is more common, and therefore more accessible to most users --
209 particularly those who don't use OS X. The PNG files are smaller than
210 their ICNS equivalents. PNG supports a wider range of sizes (although I'm
211 not now using anything that ICNS doesn't support, I might in the future).
212 The icon-scaling support added a few versions ago makes ICNS's support
213 for multiple icon sizes relatively unimportant.
215 - Reversed order of search for icons by extension: rEFInd now searches
216 for PNG files before ICNS files, rather than the other way around. This
217 makes it possible to override a volume icon for rEFInd by giving it the
218 name .VolumeIcon.png, even when a .VolumeIcon.icns file exists on the
219 volume and is used by OS X.
221 - Fixed bug that caused .VolumeIcon.icns to take higher-than-intended
222 precedence in icon setting for OS X.
224 - Chainloading to BIOS-mode boot loaders now works on UEFI-based PCs when
225 rEFInd is built with GNU-EFI, not just when built with Tianocore.
230 - The "dont_scan_volumes" parameter now also works with legacy-boot
231 volumes. Unlike with EFI volumes, where the option you pass must exactly
232 match an entire volume name, when applied to legacy-boot volumes, it
233 matches any part of the description that appears beneath the item when
234 you select it in the rEFInd main menu.
236 - Can now boot in legacy mode from second (and probably later) hard disks!
238 - rEFInd now limits the length of the firmware name string shown in the
239 system information screen to 65 characters. This is done because at least
240 one EFI presents a longer string by default, and this causes the entire
241 information display to come up empty on 800x600 displays.
243 - rEFInd now uses the partition's name (as stored in the GPT data
244 structures) as a fallback for the filesystem's name if the latter can't
245 be found. Exceptions are if the partition name is one of three generic
246 names used by GPT fdisk: "Microsoft basic data", "Linux filesystem", or
247 "Apple HFS/HFS+". These are ignored in favor of the descriptive fallback
248 (e.g., "20 GiB Btrfs volume")
250 - It's now possible to specify a volume by partition GUID number in a
251 manual boot stanza. This should be more reliable (albeit also more
252 awkward) than using a filesystem number (such as fs0: or fs1:).
254 - Fixed memory-allocation bug that could cause error message displays,
255 and possibly hangs, when re-scanning boot loaders.
260 - Attempt to fix rEFInd perpetually re-scanning after ejecting a disc on
263 - Added check to remove redundant (or non-functional if Secure Boot is
264 active) kernel entries for Ubuntu, which is now including two versions of
265 kernels, one signed and the other unsigned.
267 - Fixed bug in install.sh that could cause it to display error messages
268 if the dmraid utility was not installed.
270 - The HFS+ driver now reports a correct volume name.
272 - Fixed some EFI filesystem driver bugs that could cause lockups under
273 some circumstances. These bugs could affect any of the filesystem
276 - Added "gdisk" option to the "showtools" configuration file token. When
277 active, this adds gdisk.efi or gdisk_{arch}.efi, if present in the
278 EFI\tools directory, to the tools row.
280 - Fixed mistaken identification of the MOK utility as the "MOK utility
287 - Added "debian" directory to source, which facilitates creation of Debian
288 packages. Packages built in this way are built with GNU-EFI and don't run
289 any post-installation script, so although the rEFInd binaries are on the
290 hard disk, they aren't installed to be bootable; you must manually run
291 install.sh. Also, at least on Ubuntu, the Make.common file's /usr/lib64
292 references must be changed to /usr/lib. This is more of a proof of
293 concept and a "leg up" for distribution maintainers than anything else.
295 - Two new options, big_icon_size and small_icon_size, set the size of
296 the first-row OS icons and of the second-row tool icons, respectively.
297 The big_icon_size option also indirectly sets the size of disk-type
298 badges; they're 1/4 the size of the big icons. Default values are 128 and
299 48, respectively, to match the actual icon files provided with rEFInd. If
300 the icon you're using is of a different size than you've specified,
301 rEFInd scales it. For best quality, you should both provide icons drawn
302 to the right size and set the icon sizes in refind.conf.
304 - rEFInd now automatically scales icons to fit the standard icon sizes.
305 This won't have any effect with the icons that come with rEFInd, but it
306 can help if you want to use another icon, since you needn't scale it in a
307 graphics program before using it. Note that rEFInd uses bitmap icons, so
308 scaling by a huge amount (say, a 16x16 icon to fit the standard 128x128
309 OS icon) is not likely to look good.
311 - Added new option, banner_scale, that tells rEFInd how to handle banners:
312 Set to "noscale" (the default), banners are not scaled, although they'll
313 be cropped if they're too big for the display. This is the same as the
314 behavior in previous versions. Set to "fillscreen", rEFInd now scales the
315 banner image (larger or smaller) to fill the display.
317 - Adjusted the post-installation script in refind.spec (used to generate
318 RPMs, and therefore also indirectly Debian packages) to search for
319 existing shim program files under the filesnames shim.efi and shimx64.efi
320 rather than just shim.efi. Ubuntu uses shimx64.efi, so Debian packages
321 were failing to detect Ubuntu's shim in previous versions. (Note,
322 however, that Ubuntu's early shim 0.1 is unsuitable for use with rEFInd
323 The newer 0.4 version that's in the repositories now should work fine;
324 it's only when installing on an older system that's NOT been updated that
325 problems might arise.
330 - Can now specify complete paths, optionally including volumes, in
333 - Added shimx64.efi to the default dont_scan_files list.
335 - Added windows_recovery_files token, to specify what program(s) launch a
336 Windows recovery utility; and the "windows_recovery" option to
337 "showtools," to control whether or not to display the Windows recovery
338 utility on the second row of icons.
340 - The use_graphics_for, also_scan_dirs, dont_scan_dirs, dont_scan_files,
341 and scan_driver_dirs tokens in refind.conf now support "+" as the first
342 option, which causes the remaining options to be added to the default
343 value rather than replacing that value. (This has no practical effect for
344 scan_driver_dirs, though, since it has a null default value.)
346 - Added support for specifying the configuration file at program launch,
347 via the "-c" parameter, as in "refind_x64.efi -c foo.conf" to use the
348 foo.conf file as the main configuration file.
350 - Scans of ext2/3/4fs and ReiserFS partitions now omit partitions with
351 duplicate filesystem UUIDs. These are likely parts of RAID arrays and so
352 would have the same boot loaders or kernels as the first one with a given
355 - Added feature in install.sh: Script now tries to locate and mount an ESP
356 in Linux, if it's currently unmounted.
358 - Fixed bug in mkrlconf.sh and install.sh that caused a stray line break
359 and PARTUUID= specification to appear in generated refind_linux.conf file
360 under some circumstances.
365 - Added support for multiple "default_selection" targets. These MUST be
366 comma-separated AND enclosed in quotes, as in:
367 default_selection "fred,ginger"
368 This example will launch "fred" by default if it's available; and if
369 it's not, rEFInd will attempt to launch "ginger" as the default.
371 - Added support for time-sensitive "default_selection" setting. This token
372 may now have either one or three options. If one, it's interpreted as it
373 has been in the past, as setting a default that's independent of times.
374 If you follow this default by two times, however, those are interpreted
375 as the start and end times (in 24-hour format) for a default setting. For
376 instance, "default_selection foo 8:00 17:00" causes foo to be the default
377 from 8:00 (AM) to 17:00 (aka 5:00 PM). You can include multiple
378 "default_selection" lines to set different defaults for a variety of
379 times. If they're in conflict, the last one takes precedence. Note that
380 times are hardware clock's native value, which may be local time or UTC,
381 depending on your computer.
383 - Added support for a blank-screen startup: Set "screensaver -1" and the
384 screen saver will be initialized when rEFInd starts. If you set a low
385 "timeout" value, the result will be a boot straight to the default OS
386 unless you hit a key soon after rEFInd starts. Once you hit a key, the
387 screensaver will be disabled.
389 - Added --ownhfs {target} option to install.sh. This option causes rEFInd
390 to install to an HFS+ partition in a way that's more consistent with the
391 way the Mac's native boot loader is installed. Note that you should NOT
392 install to an already-bootable partition with this option, since it will
393 overwrite the existing boot loader, which would render OS X unbootable.
398 - Fixed bug that caused unbootable exFAT partitions to show up as
399 bootable on Macs with BIOS/CSM/legacy boot options enabled.
401 - Fixed bug in install.sh that caused installs to the ESP on recent
402 versions of OS X to fail.
404 - Fixed bug that caused rEFInd to hang on some Macs when multiple EFI
405 drivers were present.
407 - Fixed bug that caused clear to default gray screen when launching OSes
408 with 'use_graphics_for' enabled, even when the rEFInd background is not
409 gray. Now rEFInd clears to the same background color used in its menu.
410 When launching OS X, though, the OS X boot loader will itself clear to
411 gray a second or so later; and when launching Linux, it will clear to
412 black a second or so later.
417 - My initial 0.7.4 release broke legacy-boot ability on Macs, so I quickly
418 released this version using the original 0.7.4 filenames to fix the
424 - Fixed options passing to loader to include loader's filename as the first
425 option. This omission had no effect on most boot loaders, but caused
426 VMware's mboot64.efi to fail.
428 - Added support for memtest86 as second-row option. Program must be
429 stored in EFI/tools, EFI/tools/memtest, EFI/tools/memtest86, EFI/memtest,
430 or EFI/memtest86; and must use the name memtest86.efi, memtest86_x64.efi,
431 memtest86x64.efi, or bootx64.efi (changing "x64" to "ia32" on IA-32
432 systems). The memtest86 program is scanned for when the "showtools"
433 option includes the "memtest" or "memtest86" token, which it does by
436 - Added space to end of "Boot %s from %s" string; enables adding a space
437 to the end of the "default_selection" item (in quotes) to set a default
438 that matches a volume name that's identical to another one except for
439 extra characters at the end of the non-wanted volume's name.
441 - Fixed bug that could cause rEFInd to hang when launching boot loaders
442 under some conditions. (Launching from Firewire drives on Macs is the
443 known case, but there may be others.)
448 - Fixed bug that caused missing media-type badges on BIOS-mode boot
451 - Fixed bug that caused failure when launching BIOS-mode OSes on Macs.
456 - Fixed bug that caused display glitches in the final entry on the first
457 row of icons if the second row of icons was empty.
459 - Fixed bug that could cause incorrect scanning or even a rEFInd crash when
460 using volume specification in also_scan_dirs token.
462 - Added protection against loading invalid drivers and other EFI programs.
463 (Some EFIs crash when attempting to load such drivers and programs.)
465 - Added PreLoader.efi and shim-fedora.efi to default dont_scan_files list;
466 it's now "shim.efi, shim-fedora.efi, PreLoader.efi, TextMode.efi,
467 ebounce.efi, GraphicsConsole.efi, MokManager.efi, HashTool.efi,
468 HashTool-signed.efi".
470 - Added icon for Funtoo Linux.
472 - Fixed reading of volume badges from user-specified icons directory, which
475 - Fixed handling of /.VolumeBadge.icns (or /.VolumeBadge.png) files, which
481 - Fixed build problem with recent development versions of EDK2.
483 - Added scan for Boot Repair's backup of the Windows boot loader
484 (bkpbootmgfw.efi). If found, give separate entries for it and for
485 bootmgfw.efi, each with its own descriptive text label.
487 - Fixed also_scan_dirs; used to have bug that caused it to ignore
488 volume specification, if present.
490 - Fixed bug in driver cache that caused Btrfs driver to hang sometimes.
495 - Added Btrfs signature to rEFInd, so that it can identify the filesystem
496 type for volumes that lack labels.
498 - Changed some critical filesystem driver pointers from 32-bit to 64-bit.
499 This *SHOULD* enable use of over-2TiB filesystems (for those filesystems
500 that support such large volumes). This capability is largely untested,
503 - Added a cache to the filesystem driver core, and therefore to all the
504 filesystem drivers. This cache greatly improves performance in
505 VirtualBox, and offers modest performance improvements on a few "real"
506 computers. The most dramatic improvement is on ext2/3fs under VirtualBox:
507 Loading a kernel and initrd used to take ~200 seconds on my system, but
508 now takes ~3 seconds! On most "real" hardware, the improvement is much
509 less dramatic -- an improvement of a second or less, presumably because
510 of cacheing within the EFI or on the hard disk itself.
512 - Filter boot loaders based on a test of their validity; keeps out Linux
513 kernels without EFI stub loader code, loaders for the wrong architecture,
514 non-EFI loaders, etc.
516 - New Btrfs driver, contributed by Samuel Liao based on GRUB 2.00 Btrfs
522 - Changed the 64-bit EFI shell included in the CD-R and USB flash drive
523 images to a version 2 shell that should support the "bcfg" command.
525 - Added support for PreBootloader to refind.spec's built-in installation
528 - Added support for the Linux Foundation's PreLoader to install.sh. It's
529 treated just like shim, including using the --shim option (or, now,
530 --preloader); but it searches for and copies HashTool.efi rather than
531 MokManager.efi, and filenames are adjusted appropriately.
533 - Added code to determine Linux root filesystem from /etc/fstab file, if
534 it's on the same partition as the kernel and if the refind_linux.conf
535 file is not available. This enables rEFInd to boot Linux without any
536 rEFInd-specific configuration files on some (but not all) systems.
541 - New feature: rEFInd now ignores symbolic links to files on filesystems
542 that support them. This prevents the "vmlinuz" symbolic link that some
543 distributions create in the root directory from appearing in the loader
544 list. Note that this does NOT affect symbolic links to directories.
546 - Added icons for Lubuntu and Kubuntu.
548 - Improved the install.sh script so that it does a better job dealing with
549 directory names that contain spaces.
551 - rEFInd now tries to guess the Linux distribution type based on the kernel
552 filename (Fedora and RHEL only) or the "ID" or "NAME" variables in
553 /etc/os-release on the kernel's partition. None of these is guaranteed to
554 work. A fallback of the Tux penguin icon remains in place in case rEFInd
555 can't find anything substantive enough for a guess.
557 - Added "EFI\opensuse" to the locations searched for MOK utilities, since
558 OpenSUSE now uses that name.
560 - Renamed "Reboot to Firmware User Interface" to "Reboot to Computer Setup
563 - Fixed bug in gptsync that caused it to hang if the disk had too few GPT
564 partitions to fill the MBR.
569 - Added support for "screensaver" token. If set to a positive integer, this
570 causes the screen to blank after the specified number of seconds of
571 inactivity. Pressing most keys (unfortunately NOT including Shift, Alt,
572 or Ctrl) will restore the display and restart the screen saver timeout.
574 - Added icon for ChromeOS (os_chrome.icns in the icons subdirectory).
575 ChromeBooks reportedly boots using the fallback filename, but if a user
576 wants to install rEFInd on a ChromeBook, renaming the original EFI/BOOT
577 directory to EFI/chrome and then installing rEFInd in the fallback
578 filename will bring up this new icon for ChromeOS.
580 - Added new option to reboot the computer into the firmware's user
581 interface. This option is active by default, or can be set via the
582 "firmware" option to the "showtools" token in refind.conf. It works
583 on only some computers, though; older computers lack this feature, and
584 when rEFInd is told to use this feature on such computers, the directive
587 - Upgraded LodePNG library from version 20121216 to 20130415 and
588 restructured rEFInd-specific modifications to simplify future upgrades.
590 - Replaced hexadecimal error code with description if an error is
591 encountered when saving a screen shot.
593 - Enable multiple screen shots: Rather than naming all screen shots
594 "screenshot.bmp", the name is now "screenshot_###.bmp", where "###" is a
595 sequence number, starting with "001".
600 - Modified default banner to include the new rEFInd icon, provided by Erik
603 - Worked around a suspected firmware bug that caused rEFInd 0.6.6 to 0.6.8
604 to hang at startup on some systems (DUET and some Macs).
606 - Modified rEFInd to search for gptsync under the names gptsync.efi and
607 gptsync_{arch}.efi, where {arch} is ia32 or x64. (Previous versions
608 searched only for gptsync.efi.)
610 - Added gptsync program from rEFIt project, but with some changes to
611 improve flexibility and make it less likely that UEFI users will
612 accidentally trash their systems.
614 - Changed timeout code so that the timeout continues if the keyboard is
615 disconnected. This can help in booting a headless server or a system with
616 a bluetooth or other keyboard that's not recognized by the EFI.
621 - Added workaround for presumed EFI bug that was causing "Invalid
622 Parameter" errors when scanning for boot loaders on some computers.
624 - Added search for an EFI shell called shell.efi in the root directory
625 (previously this name was only accepted in EFI\tools).
627 - Fixed bug in install.sh that caused it to fail on some systems (Fedora
628 18, for instance) because of a problem identifying the ESP.
630 - Fixed bug that caused icons named after boot loaders to not be used.
635 - Added a more explicit error message summarizing options when a launch of
636 a program results in a Secure Boot failure.
638 - Changed MOK tool detection to scan all volumes, not just the rEFInd
639 home volume. This is desirable because the Linux Foundation's HashTool
640 can only scan its own volume, making it desirable to place copies of this
641 program on every volume that holds EFI boot loader binaries.
643 - Added support for launching the Linux Foundation HashTool as a means of
644 managing MOKs (or MOK hashes, at any rate).
646 - Fixed bug that caused rEFInd to present an entry for itself as a
647 Microsoft OS if it was launched as EFI/Microsoft/Boot/bootmgfw.efi.
649 - Fixed bug that caused dont_scan_volumes option to be added to
652 - Fixed dont_scan_volumes so that it works with OS X boot loaders.
654 - Fixed broken mixing of PNG and ICNS icons when using a user-specified
655 icons directory -- previously, an ICNS file in the default directory
656 would override a PNG file in the user-specified directory.
661 - rEFInd now ignores the fallback boot loader (EFI/BOOT/bootx64.efi or
662 EFI/BOOT/bootia32.efi) if it's identical to another boot loader on
663 the same volume. This is intended to help unclutter the display on
664 systems that run Windows, since Windows tends to duplicate its own boot
665 loader under the fallback name.
667 - Added new "font" token to refind.conf, which enables specifying a font in
668 the form of a PNG file. This file must contain monospace glyphs for the
669 95 characters from ASCII 32 to 126 (space through tilde), inclusive, plus
670 a glyph to be displayed for characters outside of this range, for a total
673 - Replaced the old font (inherited from rEFInd) with an anti-aliased
674 version of Luxi Mono Regular 14 point.
676 - Fixed bug that caused rEFInd to ignore manual boot stanzas in files
677 included via the "include" token in refind.conf.
679 - Fixed bug that caused ASSERT error on some systems (and conceivably a
680 crash on startup on some) when default_selection line in refind.conf was
681 commented out or empty.
683 - Fixed bug that caused "Binary is whitelisted" message to persist on
684 screen after loading MOK-signed drivers in Secure Boot mode.
686 - Fixed bug that caused rEFInd to ignore the "icon" token in refind.conf
689 - Fixed bug in install.sh that caused the script to fail to update
690 drivers when rEFInd was installed in EFI/BOOT/.
695 - Improved text color support: rEFInd now uses black text against light
696 backgrounds and white text against dark backgrounds.
698 - Added support for PNGs as banners, icons, and selectors.
700 - Added icon for ALT Linux.
702 - Added "safemode" option to "hideui" token, to hide option to boot into
703 safe mode for OS X ("-v -x" option to boot.efi).
705 - Added icon for Haiku (os_haiku.icns).
707 - Enable transparency of icons & main-menu text when the banner icon is
708 sized to cover these areas.
710 - Fixed bug that could cause rEFInd to crash if fed a banner image that's
711 too big. Note that "too big" can be substantially smaller than the screen
717 - Revised install.sh to copy ext2fs driver, rather than ext4fs driver, for
718 ext2/3 filesystems. This can help keep non-functional entries from links
719 from /vmlinuz to /boot/vmlinuz out of the menu if the system uses ext4fs
720 on root and ext2fs or ext3fs on /boot.
722 - Fixed a couple of memory management bugs that cause rEFInd to hang at
723 startup on some systems.
728 - Added the ability to specify a volume name or number in the
729 "dont_scan_dirs" and "also_scan_dirs" tokens.
731 - Fixed a bug that caused removable EFI media to not appear in scan lists
732 if rEFInd was installed as EFI/BOOT/boot{arch}.efi on a hard disk.
734 - Modified ISO-9660 driver so that it can handle discs with other than
735 2048-byte sectors. This makes it useful for reading "hybrid ISO" images
736 burned to USB flash disks.
738 - New mvrefind.sh script to move a rEFInd installation between a standard
739 location (typically EFI/refind) and one of the fallback locations
740 (EFI/BOOT or EFI/Microsoft/Boot). It can also do more exotic locations.
742 - The install.sh script now installs to EFI/BOOT/bootx64.efi or
743 EFI/Microsoft/Boot/bootmgfw.efi if it's run in BIOS mode. This is
744 intended to give some chance of producing a bootable installation should
745 a user accidentally install Linux in EFI mode and then install rEFInd
746 from that installation.
748 - The install.sh script now tries to find an existing rEFInd installation
749 and upgrade it, even if it's in EFI/BOOT or EFI/Microsoft/Boot rather
752 - New "--yes" option to install.sh to help with unattended or automated
753 installations (as from an RPM or Debian package).
758 - Inclusion of a sample refind.spec file for the benefit of RPM
759 distribution maintainers who might want to include rEFInd. It's a bit
760 rough, but it gets you a good chunk of the way there....
762 - The EFI filesystem drivers can now be built with the GNU-EFI toolkit as
763 well as with the TianoCore EDK2. See the BUILDING.txt file for details on
764 how to build them with either toolkit. This improvement doesn't affect
765 users of my binary packages, but it should make it easier for Linux
766 distributions to adopt rEFInd into their package systems.
768 - Tweaked refind.inf file for better build results using "native" TianoCore
769 EDK2 build process (vs. the Makefile-based build process that I use under
770 Linux). This won't affect those who use my binary builds or build under
771 Linux with the "make" command.
773 - Fixed bug that prevented Secure Boot launches from working when rEFInd
774 was built with GNU-EFI rather than the TianoCore EDK2.
776 - Substantial reworking of Secure Boot code, based on James Bottomley's
777 PreLoader program. This new code eliminates the limitation of launching
778 just one driver in Secure Boot mode and is likely to be more reliable
779 with future or obscure boot loaders. It should also work with non-x86-64
780 systems, although this relies on a platform-specific shim program, which
781 to date exists only for x86-64. The basic features are the same as before
782 -- rEFInd relies on shim for authentication functions and will launch
783 programs that are signed by Secure Boot keys, shim keys, or MOKs.
785 - Altered default for "textmode" option (when it's commented out) to not
786 adjust the text mode at all. (Prior versions set it to mode 0 by
792 - Added "--root" option to install.sh, to enable installation of rEFInd
793 to something other than the currently-running OS. This is intended for
794 use on emergency discs.
796 - Thanks to Stefan Agner, the ext4fs driver now supports the "meta_bg"
797 filesystem feature, which distributes metadata throughout the disk. This
798 feature isn't used by default, but can be set at filesystem creation time
799 by passing the "-O meta_bg,^resize_inode" option to mke2fs. (Using
800 "^resize_inode" is necessary because meta_bg is incompatible with
801 resize_inode, which IS used by default.) This feature can be used on
802 ext3fs and ext2fs as well as on ext4fs, so the ext4fs driver can now
803 handle some ext3fs and ext2fs partitions that the ext2fs driver can't
806 - Fixed some screen resolution-setting bugs.
808 - Added the "words" that make up a filesystem's label (delimited by spaces,
809 dashes, or underscores) to the list of bases used to search for OS icons.
810 For instance, if the filesystem's label is "Arch", rEFInd searches for
811 os_Arch.icns; if it's "Fedora 17", it searches for os_Fedora.icns and
812 os_17.icns; and if it's "NEW_GENTOO", it searches for os_NEW.icns and
815 - Refined hints displays to be more context-sensitive, particularly in text
818 - Instead of displaying a blank filesystem label when a filesystem has
819 none, rEFInd now displays the size and/or type of the filesystem, as in
820 "boot EFI\foo\bar.efi from 200 MiB ext3 volume" rather than "boot
821 EFI\foo\bar.efi from".
823 - Fixed a bug that caused the screen to clear after displaying an error
824 message but before displaying the "Hit any key to continue" message when
825 a boot loader launch failed.
830 - Fixed a memory allocation bug that could cause a program crash when
831 specifying certain values with the "also_scan_dirs", "dont_scan_volumes",
832 "dont_scan_dirs", "dont_scan_files", and "scan_driver_dirs" refind.conf
835 - Modified Linux kernel initrd-finding code so that if an initrd is
836 specified in refind_linux.conf, rEFInd will not add any initrd it finds.
837 This enables an override of the default initrd, and is likely to be
838 particularly helpful to Arch Linux users.
840 - Added ext4fs driver!
842 - Made "boot" the default value for "also_scan_dirs".
844 - Added identifying screen header to line editor.
846 - Fixed bug that caused rEFInd's display to be mis-sized upon return
847 from a program that set the resolution itself.
849 - Adjusted "resolution" refind.conf parameter so that it can accept EITHER
850 a resolution as width and height OR a single digit as a UEFI mode number
851 (which is system-specific). This is done because some systems present the
852 same mode twice in their mode lists, perhaps varying in refresh rate,
853 monitor output, or some other salient characteristics; specifying the
854 mode number enables selecting the higher-numbered mode, whereas using
855 horizontal and vertical resolution values selects the lowest-numbered
858 - Added "textmode" refind.conf parameter to set the text mode used in
859 text-only displays, and for the line editor and boot-time handoff
860 display even in graphics mode.
862 - Fixed bug that caused tools (shell, etc.) to launch when they were
863 highlighted and F2 or Insert was pressed.
865 - Added "editor" option to the "hideui" token in refind.conf, which
866 disables the boot options editor.
868 - Added hints text to rEFInd main menu and sub-menus. This can be disabled
869 by setting the new "hints" option to the "hideui" token in refind.conf.
871 - Added "boot with minimal options" entry to refind_linux.conf file
872 generated by install.sh. This entry boots without the options extracted
873 from the /etc/default/grub file.
875 - Added keys subdirectory to main distribution, to hold public Secure
876 Boot/shim keys from known sources.
878 - Changed install.sh --drivers option to --alldrivers, added new
879 --nodrivers option, and made the default on Linux to install the one
880 driver that's used on /boot (or the root filesystem if /boot isn't a
881 separate partition). Of course, this won't install a non-existent driver,
882 and it also won't work properly if run from an emergency disk unless you
883 mount a separate /boot partition at that location.
885 - Fixed bug in install.sh that prevented creation of refind_linux.conf file
888 0.5.1.1 (12/12/2012):
889 ---------------------
891 - Fixed bug in install.sh that prevented it from working on OS X.
896 - Added support for "0" options to "textonly" and "scan_all_linux_kernels"
897 to reverse the usual meaning of these tokens. This is useful for
898 including these options in a secondary configuration file called with the
899 new "include" token to override a setting set in the main file.
901 - Added "include" token for refind.conf, to enable including a secondary
902 configuration file from a primary one.
904 - Modified install.sh so that it creates a simple refind_linux.conf file in
905 /boot, if that file doesn't already exist and if install.sh is run from
906 Linux. If that directory happens to be on a FAT, HFS+, ext2fs, ext3fs, or
907 ReiserFS volume, and if the necessary drivers are installed, the result
908 is that rEFInd will detect the Linux installation with no further
909 configuration on many systems. (Some may still require tweaking of kernel
910 options, though; for instance, adding "dolvm" on Gentoo systems that use
913 - Added --shim and --localkeys options to install.sh to help simplify setup
914 on systems with Secure Boot active.
916 - Fixed (maybe) bug that caused resolution options to not be displayed on
917 recent Macs with GOP graphics when specifying an invalid resolution in
920 - Fixed bug that caused some programs (EFI shells, in particular) to hang
921 when launching on some systems (DUET, in particular).
923 - Implemented a fix to enable ELILO to launch with Secure Boot active.
924 This fix might help with some other boot loaders in Secure Boot mode,
925 too, but I don't know of any specifics.
930 - Added the ability to include quote marks ('"') in refind.conf and
931 refind_linux.conf tokens by doubling them up, as in:
932 "ro root=/dev/sda4 some_value=""this is it"""
933 This example results in the following string being passed as an
935 ro root=/dev/sda4 some_value="this is it"
937 - Changed refind.conf-sample to uncomment the scan_all_linux_kernels
938 option by default. If this option is deleted or commented out, the
939 program default remains to not scan all Linux kernels; but with
940 increasing numbers of distributions shipping with kernels that include
941 EFI stub loader support, setting the configuration file default to scan
942 for them makes sense.
944 - Modified the "resolution" token so that it affects text mode as well
945 as graphics mode. On my systems, though, the actual text area is still
946 restricted to an 80x25 area. (This seems to be a firmware limitation; my
947 EFI shells are also so limited.)
949 - Fixed a bug that caused the options line editor to blank out lines that
950 were not actually edited.
952 - Added support for using Matthew Garrett's Shim program and its Machine
953 Owner Keys (MOKs) to extend Secure Boot capabilities. If rEFInd is
954 launched from Shim on a computer with Secure Boot active, rEFInd will
955 launch programs signed with either a standard UEFI Secure Boot key or a
956 MOK. For the moment, this feature works only on x86-64 systems.
958 - Added new "dont_scan_files" (aka "don't_scan_files") token for
959 refind.conf. The effect is similar to dont_scan_dirs, but it creates a
960 blacklist of filenames within directories rather than directory names.
961 I'm initially using it to place shim.efi and MokManager.efi in the
962 blacklist to keep these programs out of the OS list. (MokManager.efi is
963 scanned separately as a tool; see below.) I've moved checks for
964 ebounce.efi, GraphicsConsole.efi, and TextMode.efi to this list. (These
965 three had previously been blacklisted by hard-coding in ScanLoaderDir().)
967 - Added the directory from which rEFInd launched to dont_scan_dirs. This
968 works around a bug in which rEFInd would show itself as a bogus Windows
969 entry if it's installed as EFI/Microsoft/boot/bootmgfw.efi.
971 - Added support for launching MokManager.efi for managing the Machine Owner
972 Keys (MOKs) maintained by the shim boot loader developed by Fedora and
973 SUSE. This program is scanned and presented as a second-row tool.
975 - Added support for Apple's Recovery HD partition: If it's detected, a new
976 icon appears on the second row. This icon can be removed by explicitly
977 setting the "showtools" option in refind.conf and excluding the
978 "apple_recovery" option from that line.
980 - Fixed bug that caused text-mode ("textonly" refind.conf option enabled)
981 menu entries to be right-aligned rather than left-aligned when rEFInd was
982 compiled with the TianoCore EDK2.
984 - Added "--usedefault {devicename}" and "--drivers" options to the
985 install.sh script and changed the "esp" option to "--esp".
990 - Added an icon for gummiboot.
992 - Added a boot option editor: Pressing the Insert or F2 key from a boot
993 tag's options menu opens a simple text-mode line editor on which the boot
994 options may be edited for a one-time boot with altered options.
996 - Modified the "scan_delay" feature to delay and then perform a re-scan,
997 which may work better than the first attempt at this feature (which I'm
998 told isn't working as planned).
1000 - Modified rEFInd to add a space after the command-line options only when
1001 launching Mac OS X. On some early Macs, the extra space (which had been
1002 present by default, as a carryover from rEFIt) causes problems when
1003 booting Linux kernels from FAT partitions.
1008 - Fixed some minor memory management issues.
1010 - Added new "scan_delay" feature to impose a delay before scanning
1013 - Changed default "scanfor" option from internal-external-optical to either
1014 internal-external-optical-manual (for non-Macs) or
1015 internal-hdbios-external-biosexternal-optical-cd-manual (for Macs). I've
1016 done this for two reasons:
1017 - Many Mac users have been confused by the fact that rEFInd needs
1018 reconfiguration to detect Windows (or Linux installed in BIOS mode),
1019 since rEFIt scans BIOS devices by default. Adding the BIOS options as
1020 default for them should help them.
1021 - Adding the "manual" option enables users to simply add manual boot
1022 stanzas and have them work, which is more intuitive. Adding the
1023 "manual" option will have no effect unless manual stanzas are created
1024 or uncommented, so this part of the change won't affect users' working
1025 default configurations.
1027 - Added new legacy (BIOS) boot support for UEFI-based PCs.
1032 - Fixed bug that caused a failure to boot BIOS-based OSes on Macs.
1034 - Fixed bug in install.sh that caused it to fail to detect rEFItBlesser.
1039 - Fixed bug that caused filesystem labels to be corrupted by rEFInd on
1042 - Fixed bug that caused filesystem labels to be truncated in the drivers
1045 - Fixed bug in use_graphics_for option parsing that caused most options
1046 to set graphics mode for OS X and/or Linux but not other boot
1049 - Tweaked install script to better isolate the ESP under OS X.
1054 - rEFInd now supports compilation using the TianoCore UDK2010/EDK2
1055 development kit in addition to GNU-EFI.
1057 - Added new "use_graphics_for" option to control which OSes to boot in
1058 graphics mode. (This effect lasts for a fraction of a second on most
1059 systems, since the boot loader that rEFInd launches is likely to set
1060 graphics or text mode itself.)
1062 - Graphics-mode booting now clears the screen to the current rEFInd
1063 background color (rather than black) and does NOT display boot messages.
1064 The intent is for a smoother transition when booting OS X, or perhaps
1065 other OSes that don't display boot loader messages. In practice, this
1066 effect will be tiny for many OSes, since the boot loader generally clears
1067 the screen within a fraction of a second of being launched; but the
1068 "flicker" of a rEFInd message in that time can sometimes be distracting.
1070 - Filesystem drivers now work on EFI 1.x systems, such as Macs.
1072 - Removed "linux.conf" as a valid alternative name for "refind_linux.conf"
1073 for holding Linux kernel options. The kernel developers plan to use
1074 "linux.conf" themselves.
1079 - Added a message to install.sh when run on Macs to remind users to update
1080 the "scanfor" line in refind.conf if they need to boot BIOS-based OSes
1083 - Modified install.sh script to be smarter about running efibootmgr on
1084 Linux. It now uses the whole path to the rEFInd binary as a key to
1085 determine whether an existing entry exists, rather than just the filename
1086 portion. If an entry exists and is the first entry in the boot order, the
1087 script does nothing to the NVRAM entries. If such an entry exists but is
1088 not the default, the script deletes that entry and creates a new one
1089 (implicitly making it the first in the boot order). If such an entry does
1090 not exist, the script creates a new one (again, making it the first in
1093 - Added "dont_scan_dirs" configuration file option, which adds directories
1094 to a "blacklist" of directories that are NOT scanned for boot loaders.
1099 - Added "scanning for new boot loaders" message to the re-scan function
1100 (hitting Esc at the main menu). It usually flashes up too quickly to
1101 be of importance, but if the scan function takes a while because of
1102 access to a CD that must be spun up, it should make it clear that the
1105 - Modified install.sh script to detect rEFItBlesser on Macs, and if
1106 present, to ask the user if it should be removed.
1108 - Cleaned up the Make.common file for the filesystem drivers.
1110 - Changed HFS+ driver to return volume label of "HFS+ volume" rather than
1111 an empty label. (The driver doesn't currently read the real volume
1114 - Fixed bug that could cause rEFInd to appear in its own menu after
1115 running a shell and then re-scanning for boot loaders.
1120 - Inclusion of drivers for ISO-9660, HFS+, ReiserFS, and ext2fs. Most of
1121 these drivers originated with rEFIt, although the HFS+ driver seems to
1122 have come from Oracle's VirtualBox, with some files from Apple. I hadn't
1123 included these drivers previously because the build process proved
1124 challenging. As it is, they don't work on my Mac Mini, I suspect because
1125 the build process with the UDK2010 development kit may not work with the
1126 EFI 1.x that Apple uses.
1128 - Addition of support for drivers in the "drivers_{arch}" subdirectory of
1129 the main rEFInd binary directory (e.g., "drivers_x64" or "drivers_ia32").
1130 Drivers may continue to be placed in the "drivers" subdirectory.
1132 - Added new feature to eject CDs (and other removable media): Press F12 to
1133 eject all such media. This function works only on some Macs, though (it
1134 relies on an Apple-specific EFI extension, and this extension isn't even
1135 implemented on all Macs, much less on UEFI-based PCs).
1137 - Fixed a problem that could cause GRUB 2 to fail to read its configuration
1138 file when launched from rEFInd.
1143 - Removed the GRUB 2 detection "reciped" added with 0.3.2, since I've
1144 received reports that it's not working as intended.
1146 - Added re-scan feature: Press the Esc key to have rEFInd re-read its
1147 configuration file, tell the EFI to scan for new filesystems, and re-scan
1148 those filesystems for boot loaders. The main purpose is to enable
1149 scanning a new removable medium that you insert after launching rEFInd;
1150 however, it can also be used to immediately implement changes to the
1151 configuration file or new drivers you load from an EFI shell.
1153 - Fixed a bug that could cause the scroll-right arrow to be replaced by the
1154 scroll-left arrow under some circumstances.
1159 - Added new configuration file option: "icons_dir", which sets the name
1160 of the subdirectory in which icons are found. See the documentation or
1161 sample configuration file for a full description.
1163 - Modified Makefile to generate rEFInd binary that includes architecture
1164 code -- refind_ia32.efi or refind_x64.efi, rather than the generic
1165 refind.efi. This is done mainly to help the install.sh script. The
1166 program can be named anything you like on the disk. (The generic name
1167 refind.efi is used on unknown architectures.)
1169 - Improved install.sh script: Fixed bug on OS X 10.7 and enable it to be
1170 used after building from source code (or via new "make install" Makefile
1173 - Improved screen redraws to produce less flicker when moving among the
1174 second-row tags or to the last tag on the first row.
1179 - Improved menu navigation:
1180 - In graphics mode, left & right arrow keys move left & right, while up &
1181 down arrows move between rows.
1182 - Page Up and Page Down now move through chunks of visible tags (in both
1183 text & graphics modes), jumping from one row to another only when at
1184 the edge of the row. In text mode, the "rows" are broken down as in
1185 graphics mode, but they aren't visibly distinguished on the screen.
1187 - Improved text-mode use: rEFInd now displays the proper number of entries
1188 when first started in text mode and scrolling is done sensibly when too
1189 many entries exist to fit on the screen.
1194 - Added the install.sh script to install rEFInd on Linux and Mac OS X
1195 systems. This script must be run as root (or via sudo). It requires
1196 no options, but on Mac OS X, passing it the "esp" option causes it
1197 to install rEFInd on the computer's ESP rather than the default of the
1198 currently OS X boot partition. (Under Linux, the default is to install to
1199 the ESP.) Note that there may be some unusual cases in which this script
1202 - Does a better job of clearing the screen when launching OSes in text
1205 - Added detection "recipe" for GRUB 2's BIOS Boot Partition.
1207 - Fixed bogus detection of ESPs created by Linux's mkdosfs utility or
1208 Windows as bootable partitions when "scanfor" includes BIOS scanning
1215 - Fixed bug that caused spurious "Unsupported while scanning the root
1216 directory" messages under some conitions on Macs.
1218 - Modified loader scanning code to sort boot loader entries within a
1219 directory by modification time, so that the most recently-modified loader
1220 is first among those in a given directory. Thus, if you specify a
1221 directory name (or volume name, for loaders stored in the root directory
1222 of a volume) as the default_selection, the most recent of those loaders
1223 will be the default. This is intended to help with Linux kernel
1224 maintenance when using the EFI stub loader; set up this way, the most
1225 recent kernel copied to your kernel directory will be the default,
1226 obviating the need to adjust the refind.conf file when adding a new
1227 kernel. If you want to change the default among those in the default
1228 directory, you can use "touch" to adjust the modification timestamp.
1230 - Tweaked code to find loader-specific .icns file so that it finds files
1231 for Linux kernels without .efi extensions. In this case, files should be
1232 named the same as the kernels they match, but with .icns extensions. For
1233 instance, bzImage-3.3.2 should have an icon called bzImage-3.3.2.icns.
1234 (The old code would have looked for an icon called bzImage-3.3.icns.)
1236 - Eliminated bogus OS loader tags for filenames that end in ".icns" when
1237 the scan_all_linux_kernels option is set.
1242 - I'm officially upgrading this project's status from "alpha" to "beta" and
1243 giving it a bump from 0.2.x to 0.3.0. This doesn't reflect any major
1244 milestone with this version; rather, it reflects my sense that rEFInd has
1245 been "out there" for a while, and although I've gotten bug reports,
1246 they've been minor and/or have been fixed. The program still has known
1247 bugs, but my impression is that it is, overall, usable by ordinary users.
1249 - Added "resolution" option to refind.conf, which enables setting the video
1250 resolution. To use it, pass two numeric values, as in "resolution 1024
1251 768" to use a 1024x768 video mode. Note that not all modes are supported.
1252 If you specify a non-supported video mode on a UEFI system, a message
1253 appears listing the supported video modes and you must then press a key
1254 to continue, using the default video mode (usually 800x600).
1255 Unfortunately, I don't know the calls to get a list of supported video
1256 modes on older EFI 1.x systems (including Macs), so on Macs setting an
1257 incorrect video mode silently fails (you keep using the default mode).
1258 This makes changing your video mode a hit-or-miss proposition on Macs.
1259 CAUTION: It's possible to set a legal video mode that your monitor can't
1260 handle, in which case you'll get a blank display until you boot an OS
1261 that resets the video mode.
1263 - Fixed (maybe) a bug that caused rEFInd to crash when returning from an
1264 EFI shell or other programs on Macs, particularly when rEFInd used
1265 graphical mode. I'm not 100% sure this bug is squashed because I still
1266 don't understand the cause and I only have one Mac for testing. See
1267 comments in the ReinitRefitLib() function in refit/lib.c for more
1270 - Added new refind.conf option: scan_all_linux_kernels, which causes Linux
1271 kernels that lack ".efi" extensions to be included in scans for EFI boot
1272 loaders. This may help integration with Linux distributions that don't
1273 give their kernels such names by default. Beware, though: It can detect
1274 unwanted files, such as older non-stub-loader kernels or .icns files used
1275 to give kernels with .efi extensions custom icons.
1277 - Improved EFI boot loader detection on boards with Gigabyte's Hybrid EFI,
1278 and perhaps other EFIs with a buggy StriCmp() function. Files with both
1279 ".efi" and ".EFI" extensions should now be detected as boot loaders.
1281 - Fixed a bug that caused rEFInd to fail to scan for drivers if the
1282 filesystem driver didn't set a volume name (that is, if the relevant
1283 field was set to NULL rather than even an empty string). In such
1284 situations, rEFInd now reports the volume name as "Unknown".
1289 - After much trial and tribulation, I've overcome a GNU-EFI limitation and
1290 enabled rEFInd to load EFI drivers. This feature was present in the
1291 original build of rEFIt but was removed in the versions that could
1292 compile under Linux, but now it's back -- and still being compiled under
1293 Linux! To use it, you should place your drivers in a convenient directory
1294 on the ESP (or whatever partition you use to launch rEFInd) and add a
1295 "scan_driver_dirs" entry to refind.conf to tell rEFInd where to look. (As
1296 always, you should specify the driver directory relative to the root of
1297 the filesystem.) Note that you can't launch drivers from another
1298 filesystem; they must be on the same volume that holds rEFInd. Those who
1299 compile from source code should note that implementing this feature
1300 necessitated using a more recent version of the GNU-EFI library. I'm
1301 currently using version 3.0p, and version 3.0i does NOT work. I don't
1302 know where the change occurred, but you may need to upgrade your GNU-EFI
1305 - Fixed bug that caused rEFInd to show up in its own menu sometimes.
1307 - Added new refind.conf token: also_scan_dirs. When scanning volumes for
1308 EFI boot loaders, rEFInd always scans the root directory and every
1309 subdirectory of the /EFI directory, but it doesn't recurse into these
1310 directories. The also_scan_dirs token adds more directories to the scan
1311 list. It defaults to "elilo,boot", but you can set it to any directory or
1312 directories you like.
1317 - Added "volume" keyword to configuration file's stanza options. This
1318 option changes the volume from which subsequent files (specified by
1319 "loader" and "icon") are loaded. You pass "volume" the name/label of the
1320 FILESYSTEM you want to use (not the GPT partition name), or a number
1321 followed by a colon (e.g., "1:"). The former should reliably identify a
1322 filesystem, assuming the name is unique. The latter assigns numbers based
1323 on the order in which they're scanned, which may not be as reliable but
1324 should work when a volume is unnamed.
1326 - Fixed bug in 0.2.5 that caused failure of Linux initial RAM disk
1327 mapping on some (but not all) systems. Affected computers include at
1328 least some Intel motherboards, maybe others.
1333 - Fixed bug that caused an inability to associate initial RAM disks with
1334 Linux kernels stored in a volume's root directory.
1336 - Volume badges (that override default badges) are now stored in
1337 .VolumeBadge.icns. Although undocumented, rEFInd formerly loaded custom
1338 volume badges from .VolumeIcon.icns. This carryover from rEFIt was a
1339 confusing name, given the next (new) feature, so I've changed and
1340 documented the name....
1342 - Added ability to set a default icon for a loader stored in the root
1343 directory of a volume: The icon is stored in .VolumeIcon.icns. This icon
1344 is also used for Mac OS X volumes booted from the standard location.
1346 - Fixed bug that caused icons to drop back to generic icons when rEFInd
1347 was launched in certain ways (such as from an EFI shell in rEFInd's
1348 directory) on certain systems.
1350 - Fixed bug that caused "unknown disable flag" to be shown (very briefly)
1351 instead of "unknown hideui flag" when an improper hideui flag was set.
1356 - Created new refind.conf entry: "showtools". This entry takes options of
1357 "shell", "gptsync", "about", "exit", "reboot", and "shutdown". This
1358 option is in some respects an affirmative version of portions of the old
1359 "disable" and "hideui" options; however, it enables users to specify the
1360 order in which these options appear on the screen. Also, the "exit"
1361 option is new; it terminates the program. The effect is usually to return
1362 to whatever tool launched it or to launch a default OS; however, this is
1363 somewhat unpredictable. The default therefore omits the "exit" option, as
1364 well as "gptsync", which has always been dangerous (but necessary on most
1365 MacOS/Windows dual-boot setups on Macs). As part of this reconfiguration,
1366 I've eliminated the "rescue Linux" option, which always seemed pointless
1369 - Folded "disable" and "hideui" refind.conf entries into one ("disable"),
1370 and reduced the number of options to six: "banner", "label",
1371 "singleuser", "hwtest", "arrows", and "all". ("arrows" is new and
1372 disables the scroll arrows when a system has too many tags to display
1375 - Added max_tags option to the refind.conf file, enabling users to reduce
1376 the maximum number of OS loader tags that can be displayed at once.
1378 - Updated rEFIt icon, based on the 128x128 volume label from the rEFIt CD
1381 - Added x86 and x86-64 EFI shells to the CD image version of the binary,
1382 but NOT to the binary zip file. The logic is that the CD image is more
1383 likely to be used directly as an emergency disc and so may need this
1384 feature, even though the source isn't part of the rEFInd project. (The
1385 source is readily available from the TianoCore project.)
1387 - EFI shells may now be stored at /shellx64.efi for x86-64 systems or at
1388 /shellia32.efi for x86 systems. The /EFI/tools/shell.efi name is also
1389 recognized; however, if both files are present, two EFI shell icons will
1390 appear on the main menu. The /efi/{refind-path/apps/shell.efi filename,
1391 which was never officially documented but worked as a carryover from
1392 rEFIt, is no longer valid.
1397 - Fixed (maybe) a bug that caused hangs when launching a second program
1398 after returning from a first. There are some weird system-to-system
1399 differences, though, and this fix causes (apparently harmless) error
1400 messages about "(re)opening our installation volume" on at least one
1401 system (a 32-bit Mac Mini). I'm committing this change because, imperfect
1402 though it is, it's preferable to the earlier version, at least on my
1403 small sample of computers.
1405 - Because of news that the Linux kernel developers are planning to use the
1406 filename linux.conf to hold Linux kernel configuration data for EFI
1407 booting, I'm transitioning rEFInd away from that name and to
1408 refind_linux.conf to avoid a conflict. This version can use either name,
1409 with refind_linux.conf taking precedence if both are present.
1411 - Added logo for Arch Linux.
1416 - Fixed bug that caused program failure when Linux kernels with EFI stub
1417 support were detected with no associated version numbers. rEFInd now
1418 permits automatic linking of *ONE* versionless kernel to *ONE*
1419 versionless initrd file.
1421 - Fixed bug that caused program hangs when a boot loader filename or label
1422 was too long. Such names are now properly truncated and program execution
1425 - Fixed bug that caused no text to appear in submenus on UEFI systems with
1426 small screens (800x600). NOTE: Problem still occurs on screens smaller
1427 than this, but such systems are very rare.
1432 - Added ability to set a "default_selection" that's a title or a substring
1433 of one -- the name given to a stanza in a "menuentry" or the boot
1434 loader's filename, in most cases, although "Mac OS X", "Windows XP
1435 (XoM)", and "Microsoft EFI boot" are also titles.
1437 - Added support for semi-automatic scans of Linux kernels with EFI stub
1438 loader support. The program auto-detects matching initial RAM disk files
1439 and loads additional options from the "linux.conf" file in the same
1440 directory as the kernel.
1442 - Added support for "submenuentry" keyword and associated sub-stanza
1443 entries in refind.conf file.
1445 - Renamed icons/os_mint.icns to icons/os_linuxmint.icns to match the
1446 filename Linux Mint ACTUALLY uses for its ESP boot loader directory.
1452 - Initial public release