Originally written: 3/14/2012; last Web page update: -3/23/2014, referencing rEFInd 0.7.8
+6/23/2014, referencing rEFInd 0.8.2This Web page is provided free of charge and with no annoying outside ads; however, I did take time to prepare it, and Web hosting does cost money. If you find this Web page useful, please consider making a small donation to help keep this site up and running. Thanks!
@@ -194,6 +194,8 @@ href="mailto:rodsmith@rodsbooks.com">rodsmith@rodsbooks.comBeginning with version 0.6.2, I've included RPM and Debian package files for rEFInd. If you have a working RPM-based or Debian-based Linux installation that boots in EFI mode, using one of these files is likely to be the easiest way to install rEFInd: You need only download the file and issue an appropriate installation command. In some cases, double-clicking the package in your file manager will install it. If that doesn't work, a command like the following will install the RPM on an RPM-based system:
+Beginning with version 0.6.2, I've included RPM and Debian package files for rEFInd; and starting with version 0.8.2, I'm maintaining an Ubuntu PPA for rEFInd. If you have a working RPM-based or Debian-based Linux installation that boots in EFI mode, using one of these files is likely to be the easiest way to install rEFInd: You need only download the file and issue an appropriate installation command. In some cases, double-clicking the package in your file manager will install it. If that doesn't work, a command like the following will install the RPM on an RPM-based system:
-# rpm -Uvh refind-0.7.8-1.x86_64.rpm+
# rpm -Uvh refind-0.8.2-1.x86_64.rpm
On a Debian-based system, the equivalent command is:
-# dpkg -i refind_0.7.8-1_amd64.deb+
# dpkg -i refind_0.8.2-1_amd64.deb
Either command produces output similar to that described for using the install.sh script, so you can check it for error messages and other signs of trouble. The package file installs rEFInd and registers it with the EFI to be the default boot loader. The script that runs as part of the installation process tries to determine if you're using Secure Boot, and if so it will try to configure rEFInd to launch using shim; however, this won't work correctly on all systems. Ubuntu 12.10 users who are booting with Secure Boot active should be wary, since the resulting installation will probably try to use Ubuntu's version of shim, which won't work correctly with rEFInd.
+If you're using Ubuntu, you should be able to install the PPA as follows:
+ +$ sudo apt-add-repository ppa:rodsmith/refind +$ sudo apt-get update +$ apt-get install refind+ +
The PPA version will update automatically with your other software, which you might or might not want to have happen. It's also built with GNU-EFI rather than with TianoCore. This last detail should have no practical effects, but it might be important if you've got a buggy EFI or if there's some undiscovered rEFInd bug that interacts with the build environment.
+Since version 0.6.3, the installation script makes an attempt to install rEFInd in a bootable way even if you run the script from a BIOS-mode boot, and therefore the RPM and Debian packages do the same. I cannot guarantee that this will work, though, and even if it does, some of the tricks that install.sh uses might not last for long. You might therefore want to use mvrefind.sh to move your rEFInd installation to another name after you boot Linux for the first time from rEFInd.
-Since version 0.6.2-2, my package files have installed the rEFInd binaries to /usr/share/refind-version, the documentation to /usr/share/doc/refind-version, and a few miscellaneous files elsewhere. Upon installation, the package runs the install.sh script to copy the files to the ESP. This enables you to re-install rEFInd after the fact by running install.sh, should some other tool or OS wipe the ESP or should the installation go awry. In such cases you can use install.sh or install manually.
+Since version 0.6.2-2, my package files have installed the rEFInd binaries to /usr/share/refind-version, the documentation to /usr/share/doc/refind-version, and a few miscellaneous files elsewhere. (The PPA package omits the version number from the file paths.) Upon installation, the package runs the install.sh script to copy the files to the ESP. This enables you to re-install rEFInd after the fact by running install.sh, should some other tool or OS wipe the ESP or should the installation go awry. In such cases you can use install.sh or install manually.
If you can't currently boot any OS (say, because a firmware update has wiped your NVRAM entries), you may find it convenient to install rEFInd using an EFI version 2 shell. Unfortunately, the bcfg command described here is not available in the EFI version 1 shell, and the version 2 shell is unusable on many firmware implementations prior to 2.3.1. Thus, this procedure won't work for all systems.
In addition to emergency situations, using bcfg can be desirable if efibootmgr or other OS-hosted tools don't do the job. This happens under VirtualBox, for instance. An alternative in such cases can be to use alternative names for rEFInd.
@@ -933,10 +945,10 @@ $ ioreg -l -p IODeviceTree | grep firmware-abiI've seen links to other versions of these tools from time to time on the Web, so if you try one of these programs and it crashes or behaves strangely, try performing a Web search; you may turn up something that works better for you than the one to which I've linked.
-I've received a few reports of a sluggish boot process (a delay of about 30 seconds before starting rEFInd) on some Macs after installing rEFInd. I've been unable to replicate this problem myself, and its true cause remains mysterious to me. I have found three possible solutions, though: moving rEFInd to an HFS+ volume, using the fallback filename, and clearing NVRAM entries.
+I've received a few reports of a sluggish boot process (a delay of about 30 seconds before starting rEFInd) on some Macs after installing rEFInd, as well as some other Mac-specific peculiarities. I've been unable to replicate this problem myself, and its true cause remains mysterious to me. I have found three possible solutions, though: moving rEFInd to an HFS+ volume, using the fallback filename, and clearing NVRAM entries.
Some sources suggest that delayed launches of rEFInd on Macs are more common when installing rEFInd to the ESP, so if you've done this, you could try re-installing it to your OS X boot partition.
+ +Some people have reported that installing rEFInd causes problems with resuming from a suspended OS X session. I know of two workarounds to such problems:
+ +Unfortunately, I lack a recent Mac and so can't investigate these issues myself, so I'm dependent upon others (mostly non-programmers) to offer workarounds. This is the type of problem that really requires hands-on interactive debugging sessions with the code to stand any chance of finding a better solution.
+