Originally written: 3/14/2012; last Web page update: -2/11/2013, referencing rEFInd 0.6.7
+6/8/2014, referencing rEFInd 0.8.2 -I'm a technical writer and consultant specializing in Linux technologies. This Web page is provided free of charge and with no annoying outside ads; however, I did take time to prepare it, and Web hosting does cost money. If you find this Web page useful, please consider making a small donation to help keep this site up and running. Thanks!
+This Web page is provided free of charge and with no annoying outside ads; however, I did take time to prepare it, and Web hosting does cost money. If you find this Web page useful, please consider making a small donation to help keep this site up and running. Thanks!
| Donate $2.50 | Donate $5.00 | Donate $10.00 | +Donate $20.00 | Donate another value |
Don't be scared by the length of this page! Only portions of this page apply to any given user, and most people can install rEFInd from an RPM or Debian package in a matter of seconds or by using the install.sh script in minute or two.
+Once you've obtained a rEFInd binary file, you must install it to your computer's ESP (or conceivably to some other location). The details of how you do this depend on your OS and your computer (UEFI-based PC vs. Macintosh). The upcoming sections provide details. See the Contents sidebar to the left for links to specific installation procedures. For most Linux users, an RPM or Debian package is the best way to go. If your Linux system doesn't support these formats, though, or if you're running OS X, using the install.sh script can be a good way to go. If you're using Windows, you'll have to install manually.
@@ -128,6 +168,8 @@ href="mailto:rodsmith@rodsbooks.com">rodsmith@rodsbooks.comBeginning with version 0.6.2, I've included RPM and Debian package files for rEFInd. If you have a working RPM-based or Debian-based Linux installation that boots in EFI mode, using one of these files is likely to be the easiest way to install rEFInd: You need only download the file and issue an appropriate installation command. In some cases, double-clicking the package in your file manager will install it. If that doesn't work, a command like the following will install the RPM on an RPM-based system:
+Beginning with version 0.6.2, I've included RPM and Debian package files for rEFInd; and starting with version 0.8.2, I'm maintaining an Ubuntu PPA for rEFInd. If you have a working RPM-based or Debian-based Linux installation that boots in EFI mode, using one of these files is likely to be the easiest way to install rEFInd: You need only download the file and issue an appropriate installation command. In some cases, double-clicking the package in your file manager will install it. If that doesn't work, a command like the following will install the RPM on an RPM-based system:
-# rpm -Uvh refind-0.6.7-1.x86_64.rpm+
# rpm -Uvh refind-0.8.2-1.x86_64.rpm
On a Debian-based system, the equivalent command is:
-# dpkg -i refind_0.6.7-1_amd64.deb+
# dpkg -i refind_0.8.2-1_amd64.deb
Either command produces output similar to that described for using the install.sh script, so you can check it for error messages and other signs of trouble. The package file installs rEFInd and registers it with the EFI to be the default boot loader. The script that runs as part of the installation process tries to determine if you're using Secure Boot, and if so it will try to configure rEFInd to launch using shim; however, this won't work correctly on all systems. Ubuntu 12.10 users who are booting with Secure Boot active should be wary, since the resulting installation will probably try to use Ubuntu's version of shim, which won't work correctly with rEFInd.
+If you're using Ubuntu, you should be able to install the PPA as follows:
+ +$ sudo apt-add-repository ppa:rodsmith/refind +$ sudo apt-get update +$ apt-get install refind+ +
The PPA version will update automatically with your other software, which you might or might not want to have happen. It's also built with GNU-EFI rather than with TianoCore. This last detail should have no practical effects, but it might be important if you've got a buggy EFI or if there's some undiscovered rEFInd bug that interacts with the build environment.
+Since version 0.6.3, the installation script makes an attempt to install rEFInd in a bootable way even if you run the script from a BIOS-mode boot, and therefore the RPM and Debian packages do the same. I cannot guarantee that this will work, though, and even if it does, some of the tricks that install.sh uses might not last for long. You might therefore want to use mvrefind.sh to move your rEFInd installation to another name after you boot Linux for the first time from rEFInd.
-Since version 0.6.2-2, my package files have installed the rEFInd binaries to /usr/share/refind-version, the documentation to /usr/share/doc/refind-version, and a few miscellaneous files elsewhere. Upon installation, the package runs the install.sh script to copy the files to the ESP. This enables you to re-install rEFInd after the fact by running install.sh, should some other tool or OS wipe the ESP or should the installation go awry. In such cases you can use install.sh or install manually.
+Since version 0.6.2-2, my package files have installed the rEFInd binaries to /usr/share/refind-version, the documentation to /usr/share/doc/refind-version, and a few miscellaneous files elsewhere. (The PPA package omits the version number from the file paths.) Upon installation, the package runs the install.sh script to copy the files to the ESP. This enables you to re-install rEFInd after the fact by running install.sh, should some other tool or OS wipe the ESP or should the installation go awry. In such cases you can use install.sh or install manually.
Under Linux, the install.sh script installs rEFInd to your disk's ESP. Under Mac OS X, the script installs rEFInd to your current OS X boot partition by default; but you can install to your ESP instead by passing the script the --esp option. Under either OS, you can install to something other than the currently-running OS by using the --root /mountpoint option. (See Table 1 for details.)
+Under Linux, the install.sh script installs rEFInd to your disk's ESP. Under Mac OS X, the script installs rEFInd to your current OS X boot partition by default; but you can install to your ESP instead by passing the script the --esp option, or to a non-boot HFS+ partition by using the --ownhfs devicefile option. Under either OS, you can install to something other than the currently-running OS by using the --root /mountpoint option. (See Table 1 for details.)
+ +Under Linux, install.sh will be most reliable if your ESP is already mounted at /boot or /boot/efi, as described in more detail in the Installing rEFInd Manually Using Linux section. (If you installed Linux in EFI mode, chances are your ESP is properly mounted.) If your ESP is not so mounted, install.sh will attempt to locate and mount an ESP, but this action is not guaranteed to work correctly. If you run install.sh from a BIOS/legacy-mode boot, particularly on a computer that also runs Windows, you should be aware that the tricks the script uses to install itself from BIOS mode are rather delicate. You can convert to a more conventional configuration using the mvrefind.sh script.
-Before running this script under Linux, you should ensure that your ESP is mounted at /boot or /boot/efi, as described in more detail in the Installing rEFInd Manually Using Linux section. (If you installed Linux in EFI mode, chances are your ESP is properly mounted.) This precaution isn't necessary under OS X. If you run install.sh from a BIOS/legacy-mode boot, particularly on a computer that also runs Windows, you should be aware that the tricks the script uses to install itself from BIOS mode are rather delicate. You can convert to a more conventional configuration using the mvrefind.sh script.
+Under OS X, install.sh attempts to install rEFInd to the OS X root partition by default. You can pass the script the --esp or --ownhfs device-file option, as noted in Table 1, to modify the installation location. This is helpful, and even necessary, in some cases, such as when your computer uses whole-disk encryption or if you use suspend-to-disk features.
A sample run under Linux looks something like this:
@@ -252,7 +304,8 @@ Installation has completed successfully. run the script.In addition to these quirks, you should be aware of some options that install.sh supports to enable you to customize your installation in various ways. The syntax for install.sh is as follows:
-install.sh [--esp | --usedefault device-file | --root mount-point ] \
+install.sh [--esp | --usedefault device-file | --root mount-point | \
+ --ownhfs device-file ] \
[--nodrivers | --alldrivers] [--shim shim-filename] [--localkeys] [--yes]
@@ -327,6 +381,10 @@ install.sh [--esp | --usedefault device-file | --root
If you can't currently boot any OS (say, because a firmware update has wiped your NVRAM entries), you may find it convenient to install rEFInd using an EFI version 2 shell. Unfortunately, the bcfg command described here is not available in the EFI version 1 shell, and the version 2 shell is unusable on many firmware implementations prior to 2.3.1. Thus, this procedure won't work for all systems.
In addition to emergency situations, using bcfg can be desirable if efibootmgr or other OS-hosted tools don't do the job. This happens under VirtualBox, for instance. An alternative in such cases can be to use alternative names for rEFInd.
@@ -564,9 +624,11 @@ $ ioreg -l -p IODeviceTree | grep firmware-abiNote that the shell included in rEFInd's CD-R image version is a version 1 shell, so you can't use it for this purpose. You can, however, copy rEFInd's files from the CD-R. You can even launch the version 1 shell included with rEFInd and then use that to launch a version 2 shell. Once you've booted the shell, you can proceed as follows:
+Note that the IA32 shell included in rEFInd's CD-R image version is a version 1 shell, so you can't use it for this purpose. You can, however, copy rEFInd's files from the CD-R. You can even launch the version 1 shell included with rEFInd and then use that to launch a version 2 shell. The x86-64 shell on the CD-R is the alternate shell, which should work on any x86-64 computer. Once you've booted the shell, you can proceed as follows:
With any luck, rEFInd will start up at this point. If not, you can check your settings using a shell or an emergency system for your OS of choice. In an EFI shell, you might type bcfg boot dump -b to view your boot loader entries and verify that rEFInd appears at the top of the list. Be sure to check the pathname for typos. If you continue to have problems, you might look into giving rEFInd a fallback filename that your firmware will recognize.
+ +If you're using OS X's Whole-Disk Encryption (WDE) feature, you must do two extra things:
+ +rEFInd includes the ability to launch any EFI program; however, rEFInd detects only certain programs. These include boot loaders in traditional locations and a handful of other programs. To launch these other programs, you must download and install them separately from rEFInd:
+rEFInd includes the ability to launch any EFI program; however, rEFInd detects only certain programs. These include boot loaders in traditional locations and a handful of other programs. To launch most of these other programs, you must download and install them separately from rEFInd:
Most of the reports of sluggish Macintosh boots I've seen note that the user installed rEFInd to the ESP rather than to the OS X root partition. Some users have reported that re-installing rEFInd to the OS X root partition clears up the problem. This is obviously a straightforward solution to the problem, if it works. Note that rEFInd can launch boot loaders that are stored on any partition that the EFI can read no matter where it's installed; therefore, you'll still be able to launch boot loaders stored on the ESP (or elsewhere) if you install it in this way.
-The biggest drawback to this approach is that you won't be able to edit the rEFInd configuration file or move rEFInd-related binaries from an EFI shell if you install it in this way, since Apple's HFS+ driver for EFI is read-only. (The same is true of rEFInd's HFS+ driver, so it won't help you overcome this limitation.) You may also be limited in making changes to your rEFInd configuration from Linux or other OSes, too, since Linux's HFS+ drivers disable write support by default on volumes with an active journal. You can force write access by using the force option to mount; however, this procedure is noted as being risky in the Linux HFS+ documentation, so I don't recommend doing this on a regular basis. As a compromise, you might try creating a small non-journaled HFS+ volume that's dedicated to holding rEFInd. You could even mount it as the Linux /boot partition, in which case it would also hold the Linux kernel and related files. You'll need to install rEFInd manually if you try this.
+A variant of this solution is to create a small (~100MiB) HFS+ volume to be used exclusively by rEFInd. You can then install rEFInd to that volume with the --ownhfs option to install.sh, as in ./install.sh --ownhfs /dev/disk0s6 if the volume is /dev/disk0s6. This approach has the advantage that it can be managed via OS X's own Startup Disk tool in System Preferences.
+ +The biggest drawback to storing rEFInd on an HFS+ volume is that you won't be able to edit the rEFInd configuration file or move rEFInd-related binaries from an EFI shell if you install it in this way, since Apple's HFS+ driver for EFI is read-only. (The same is true of rEFInd's HFS+ driver, so it won't help you overcome this limitation.) You may also be limited in making changes to your rEFInd configuration from Linux or other OSes, too, since Linux's HFS+ drivers disable write support by default on volumes with an active journal. You can force write access by using the force option to mount; however, this procedure is noted as being risky in the Linux HFS+ documentation, so I don't recommend doing this on a regular basis on the OS X boot volume. This isn't as risky if you use a dedicated HFS+ rEFInd partition, though. You could even mount it as the Linux /boot partition, in which case it would also hold the Linux kernel and related files. If you use disk encryption, you can't store rEFInd on the OS X root (/) partition, but you could still use an (unencrypted) separate HFS+ partition.
+ +A variant of this solution is suggested in this blog post, which recommends placing rEFInd on an HFS+ volume on the first SATA channel. (In the blogger's case, that channel used to hold an optical drive, but that drive was replaced by a hard disk.)
I've received one report that installing rEFInd to the ESP using the fallback filename (EFI/BOOT/bootx64.efi on most systems, or EFI/BOOT/bootia32.efi on very old Macs) can work around the problem.
+I've received a few reports that installing rEFInd to the ESP using the fallback filename (EFI/BOOT/bootx64.efi on most systems, or EFI/BOOT/bootia32.efi on very old Macs) can work around the problem.
copyright © 2012–2013 by Roderick W. Smith
+copyright © 2012–2014 by Roderick W. Smith
This document is licensed under the terms of the GNU Free Documentation License (FDL), version 1.3.