-# Makefile for emacs-lisp package
-
-#ident "@(#)$Name$:$Id$"
-
-# Copyright (C) 1998-1999 Stefan Monnier <monnier@cs.yale.edu>
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 2, or (at your option) any
-# later version.
-
-# This file is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with GNU Emacs; see the file COPYING. If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# load the package-specific settings
-include makefile.pkg
-
-# set up the usual installation paths
-prefix = /usr/local
-datadir = $(prefix)/share
-
-# the directory where you install third-party emacs packges
-lispdir = $(datadir)/emacs/site-lisp
-
-# the directory where the .elc files will be installed
-elcdir = $(lispdir)/$(PACKAGE)
-# the directory where the .el files will be installed
-eldir = $(elcdir)
-
-# the file where the initialization goes.
-#startupfile = $(HOME/.emacs
-startupfile = $(lispdir)/site-start.el
-
-# the directory where you installed the elib .elc files.
-# This is only needed if your site-start.el (or default.el) does not
-# set up elib correctly.
-elibdir = $(lispdir)/elib
-
-# the directory where you install the info doc
-infodir = $(prefix)/info
-docdir = $(prefix)/doc
-
-EMACS = emacs
-MAKEINFO= makeinfo
-TEXI2DVI= texi2dvi
-SHELL = /bin/sh
-DVIPS = dvips
-CP = cp
-RM = rm -f
-MKDIR = mkdir -p
-ETAGS = etags
-
-######################################################################
-### No changes below this line should be necessary ###
-######################################################################
-
-ELFLAGS = --eval '(setq load-path (append (list "." "$(elibdir)" "$(lispdir)") load-path))'
-ELC = $(EMACS) -batch $(ELFLAGS) -f batch-byte-compile
-
-ELCFILES = $(ELFILES:.el=.elc)
-
-TEXEXTS = *.cps *.fns *.kys *.vr *.tp *.pg *.log *.aux *.toc *.cp *.ky *.fn
-
-.SUFFIXES: .elc .el .info .ps .dvi .texi
-.PHONY: elcfiles info clean distclean default
-.PHONY: install_startup install_elc install install_el install_info
-.PHONY: dvi postscript
-
-.el.elc:
- $(ELC) $<
-
-.texi.info:
- $(MAKEINFO) $<
-
-.texi.dvi:
- $(TEXI2DVI) $<
-
-.dvi.ps:
- $(DVIPS) -f $< >$@
-
-######################################################################
-
-default: elcfiles
-
-elcfiles: $(ELCFILES)
-info: $(PACKAGE).info
-
-install_elc: $(ELCFILES) $(PACKAGE)-startup.el
- $(MKDIR) $(elcdir)
- for f in $(ELCFILES) $(PACKAGE)-startup.el; do \
- $(CP) $$f $(elcdir)/$$f ;\
+# Makefile for GNU Emacs Lisp Package Archive.
+
+EMACS=emacs
+
+ARCHIVE_TMP=archive-tmp
+SITE_DIR=site
+
+.PHONY: archive-tmp process-archive archive-full org-fetch clean all do-it
+
+## Set up the source files for direct usage, by pointing
+## `package-directory-list' to the site/ directory.
+site: packages
+ mkdir -p $(SITE_DIR)
+ $(EMACS) -batch -l $(CURDIR)/admin/archive-contents.el \
+ --eval "(batch-make-site-dir \"packages\" \"$(SITE_DIR)\")"
+
+site/%: do-it
+ $(EMACS) -batch -l $(CURDIR)/admin/archive-contents.el \
+ --eval "(progn (setq debug-on-error t) (batch-make-site-package \"$@\"))"
+
+## Deploy the package archive to archive/, with packages in
+## archive/packages/:
+archive: archive-tmp
+ $(MAKE) $(MFLAGS) process-archive
+
+archive-tmp: packages
+ mkdir -p $(ARCHIVE_TMP)
+ cp -a packages/. $(ARCHIVE_TMP)/packages
+
+process-archive:
+ # First, refresh the ChangeLog files. This needs to be done in
+ # the source tree, because it needs the Bzr data!
+ cd packages; \
+ $(EMACS) -batch -l $(CURDIR)/admin/archive-contents.el \
+ -f batch-prepare-packages
+ # FIXME, we could probably speed this up significantly with
+ # rules like "%.tar: ../%/ChangeLog" so we only rebuild the packages
+ # that have indeed changed.
+ cd $(ARCHIVE_TMP)/packages; $(EMACS) -batch -l $(CURDIR)/admin/archive-contents.el -f batch-make-archive
+ @cd $(ARCHIVE_TMP)/packages; \
+ for pt in *; do \
+ if [ -d $$pt ]; then \
+ echo "Creating tarball $${pt}.tar" && \
+ tar -cf $${pt}.tar $$pt --remove-files; \
+ fi; \
done
-
-install_el:
- $(MKDIR) $(eldir)
- for f in $(ELFILES); do \
- $(CP) $$f $(eldir)/$$f ;\
- done
-
-install_info: $(PACKAGE).info
- $(MKDIR) $(infodir)
- $(CP) *.info* $(infodir)/
- -[ ! -w $(infodir)/dir ] \
- || install-info --info-dir=$(infodir)/dir $(PACKAGE).info
-
-install_startup:
- $(MKDIR) $(lispdir)
- @if grep $(PACKAGE) $(lispdir)/site-start.el >/dev/null 2>&1 || \
- grep $(PACKAGE) $(startupfile) >/dev/null 2>&1 || \
- grep $(PACKAGE) $(lispdir)/default.el >/dev/null 2>&1; then \
- echo "**********************************************************" ;\
- echo "*** It seems you already have some setup code" ;\
- echo "*** for $(PACKAGE) in your startup files." ;\
- echo "*** Check that it properly loads \"$(PACKAGE)-startup\"" ;\
- echo "**********************************************************" ;\
- else \
- echo 'echo ";; load $(PACKAGE) setup code" >>$(startupfile)' ;\
- echo ";; load $(PACKAGE) setup code" >>$(startupfile) ;\
- echo 'echo "(add-to-list '\''load-path \"$(elcdir)\")" >>$(startupfile)' ;\
- echo "(add-to-list 'load-path \"$(elcdir)\")" >>$(startupfile) ;\
- echo 'echo "(load \"$(PACKAGE)-startup\")" >>$(startupfile)' ;\
- echo "(load \"$(PACKAGE)-startup\")" >>$(startupfile) ;\
+ mkdir -p archive/packages
+ mv archive/packages archive/packages-old
+ mv $(ARCHIVE_TMP)/packages archive/packages
+ chmod -R a+rX archive/packages
+ rm -rf archive/packages-old
+ rm -rf $(ARCHIVE_TMP)
+
+## Deploy the package archive to archive/ including the Org daily:
+archive-full: archive-tmp org-fetch
+ $(MAKE) $(MFLAGS) process-archive
+ #mkdir -p archive/admin
+ #cp admin/* archive/admin/
+
+org-fetch: archive-tmp
+ cd $(ARCHIVE_TMP)/packages; \
+ pkgname=`curl -s http://orgmode.org/elpa/|perl -ne 'push @f, $$1 if m/(org-\d{8})\.tar/; END { @f = sort @f; print "$$f[-1]\n"}'`; \
+ wget -q http://orgmode.org/elpa/$${pkgname}.tar -O $${pkgname}.tar; \
+ if [ -f $${pkgname}.tar ]; then \
+ tar xf $${pkgname}.tar; \
+ rm -f $${pkgname}.tar; \
+ mv $${pkgname} org; \
fi
-postscript: $(PACKAGE).ps
-dvi: $(PACKAGE).dvi
-install_dvi: dvi
- $(MKDIR) $(docdir)
- $(CP) `find . -type f -name '*.dvi' -print` $(docdir)/
-
-install: install_elc install_info install_startup install_el
-
clean:
- $(RM) *~ core .\#* $(TEXEXTS)
-
-TAGS tags:
- $(ETAGS) $(ELFILES)
-
-distclean: clean
- $(RM) *.elc *.dvi *.info* *.ps
-
-######################################################################
-### don't look below ###
-######################################################################
-
-$(PACKAGE)-startup.el: $(ELFILES)
- [ -f $@ ] || echo '\f' >$@
- $(EMACS) --batch --eval '(setq generated-autoload-file "'`pwd`'/$@")' -f batch-update-autoloads "."
-
-##
-
-TAG = $(shell echo v$(VERSION) | tr '.' '_')
-ftpdir=/home/ftp/pub/monnier/$(PACKAGE)
-cvsmodule=elisp/$(PACKAGE)
-cvsroot=$(cat CVS/Root)
+ rm -rf archive $(ARCHIVE_TMP) $(SITE_DIR)
-dist:
- cvs tag -F $(TAG) &&\
- cd $(TMP) &&\
- cvs -d $(cvsroot) export -r $(TAG) -d $(PACKAGE)-$(VERSION) $(cvsmodule) &&\
- cd $(PACKAGE)-$(VERSION) &&\
- gmake info $(PACKAGE)-startup.el &&\
- cd .. &&\
- ztar $(PACKAGE)-$(VERSION) &&\
- rm -rf $(PACKAGE)-$(VERSION)
- mv $(TMP)/$(PACKAGE)-$(VERSION).tar.gz $(ftpdir)/
- ln -sf $(PACKAGE)-$(VERSION).tar.gz $(ftpdir)/$(PACKAGE).tar.gz
+all: site