The values of these variables take effect when you display the
buffer in a window. If you change them while the buffer is visible,
you can call @code{set-window-buffer} to display it once again in the
-same window, to make the changes take effect.
+same window, to make the changes take effect. A buffer that does not
+specify values for these variables will use the default values
+specified for the frame; see @ref{Layout Parameters}.
@defun set-window-fringes window left &optional right outside-margins
This function sets the fringe widths of window @var{window}.
* GIF Images:: Special features for GIF format.
* TIFF Images:: Special features for TIFF format.
* PostScript Images:: Special features for PostScript format.
+* ImageMagick Images:: Special features available through ImageMagick.
* Other Image Types:: Various other formats are supported.
* Defining Images:: Convenient ways to define an image for later use.
* Showing Images:: Convenient ways to display an image once it is defined.
Emacs can display a number of different image formats; some of them
are supported only if particular support libraries are installed on
-your machine. In some environments, Emacs can load image
-libraries on demand; if so, the variable @code{image-library-alist}
-can be used to modify the set of known names for these dynamic
-libraries (though it is not possible to add new image formats).
+your machine. In some environments, Emacs can load support libraries
+on demand; if so, the variable @code{dynamic-library-alist}
+(@pxref{Dynamic Libraries}) can be used to modify the set of known
+names for these dynamic libraries (though it is not possible to add
+new image formats). Note that image types @code{pbm} and @code{xbm}
+do not depend on external libraries and are always available in Emacs.
The supported image formats include XBM, XPM (this requires the
libraries @code{libXpm} version 3.4k and @code{libz}), GIF (requiring
@code{image-type-available-p}.
@end defvar
-@defvar image-library-alist
-This in an alist of image types vs external libraries needed to
-display them.
-
-Each element is a list @code{(@var{image-type} @var{library}...)},
-where the car is a supported image format from @code{image-types}, and
-the rest are strings giving alternate filenames for the corresponding
-external libraries to load.
-
-Emacs tries to load the libraries in the order they appear on the
-list; if none is loaded, the running session of Emacs won't support
-the image type. @code{pbm} and @code{xbm} don't need to be listed;
-they're always supported.
-
-This variable is ignored if the image libraries are statically linked
-into Emacs.
-@end defvar
-
@defun image-type-available-p type
This function returns non-@code{nil} if image type @var{type} is
available, i.e., if images of this type can be loaded and displayed in
@end example
@end table
+@node ImageMagick Images
+@subsection ImageMagick Images
+@cindex ImageMagick images
+@cindex images, support for more formats
+
+ If you build Emacs with ImageMagick (@url{http://www.imagemagick.org})
+support, you can use the ImageMagick library to load many image formats.
+
+@findex imagemagick-types
+The function @code{imagemagick-types} returns a list of image file
+extensions that your installation of ImageMagick supports. To enable
+support, you must call the function @code{imagemagick-register-types}.
+
+@vindex imagemagick-types-inhibit
+The variable @code{imagemagick-types-inhibit} specifies a list of
+image types that you do @emph{not} want ImageMagick to handle. There
+may be overlap between image loaders in your Emacs installation, and
+you may prefer to use a different one for a given image type (which
+@c FIXME how is this priority determined?
+loader will be used in practice depends on the priority of the loaders).
+@c FIXME why are these uppercase when image-types is lower-case?
+@c FIXME what are the possibe options? Are these actually file extensions?
+For example, if you never want to use the ImageMagick loader to use
+JPEG files, add @code{JPG} to this list.
+
+@vindex imagemagick-render-type
+You can set the variable @code{imagemagick-render-type} to choose
+between screen render methods for the ImageMagick loader. The options
+are: @code{0}, a conservative method which works with older
+@c FIXME details of this "newer method"?
+@c Presumably it is faster but may be less "robust"?
+ImageMagick versions (it is a bit slow, but robust); and @code{1},
+a newer ImageMagick method.
+
+Images loaded with ImageMagick support a few new display specifications:
+
+@table @code
+@item :width, :height
+The @code{:width} and @code{:height} keywords are used for scaling the
+image. If only one of them is specified, the other one will be
+calculated so as to preserve the aspect ratio. If both are specified,
+aspect ratio may not be preserved.
+
+@item :rotation
+Specifies a rotation angle in degrees.
+
+@item :index
+Specifies which image to view inside an image bundle file format, such
+as TIFF or DJVM. You can use the @code{image-metadata} function to
+retrieve the total number of images in an image bundle (this is
+similar to how GIF files work).
+@end table
+
+
@node Other Image Types
@subsection Other Image Types
@cindex PBM
efficiently. When Emacs displays an image, it searches the image
cache for an existing image specification @code{equal} to the desired
specification. If a match is found, the image is displayed from the
-cache; otherwise, Emacs loads the image normally.
-
- Occasionally, you may need to tell Emacs to refresh the images
-associated with a given image specification. For example, suppose you
-display an image using a specification that contains a @code{:file}
-property. The image is automatically cached, and subsequent displays
-of that image, with the same image specification, will use the image
-cache. If the image file changes in the meantime, Emacs would be
-displaying the old version of the image. In such a situation, you can
-``refresh'' the image by calling @code{image-refresh}.
-
- In Emacs' current implementation, each graphical terminal possesses
-an image cache, which is shared by all the frames on that terminal
+cache. Otherwise, Emacs loads the image normally.
+
+@defun image-flush spec &optional frame
+This function removes the image with specification @var{spec} from the
+image cache of frame @var{frame}. Image specifications are compared
+using @code{equal}. If @var{frame} is @code{nil}, it defaults to the
+selected frame. If @var{frame} is @code{t}, the image is flushed on
+all existing frames.
+
+In Emacs' current implementation, each graphical terminal possesses an
+image cache, which is shared by all the frames on that terminal
(@pxref{Multiple Terminals}). Thus, refreshing an image in one frame
also refreshes it in all other frames on the same terminal.
-
-@defun image-refresh spec &optional frame
-This function refreshes any images with image specifications
-@code{equal} to @var{spec} on frame @var{frame}. If @var{frame} is
-@code{nil}, it defaults to the selected frame. If @var{frame} is
-@code{t}, the refresh is applied to all existing frames.
@end defun
+ One use for @code{image-flush} is to tell Emacs about a change in an
+image file. If an image specification contains a @code{:file}
+property, the image is cached based on the file's contents when the
+image is first displayed. Even if the file subsequently changes,
+Emacs continues displaying the old version of the image. Calling
+@code{image-flush} flushes the image from the cache, forcing Emacs to
+re-read the file the next time it needs to display that image.
+
+ Another use for @code{image-flush} is for memory conservation. If
+your Lisp program creates a large number of temporary images over a
+period much shorter than @code{image-cache-eviction-delay} (see
+below), you can opt to flush unused images yourself, instead of
+waiting for Emacs to do it automatically.
+
@defun clear-image-cache &optional filter
This function clears an image cache, removing all the images stored in
it. If @var{filter} is omitted or @code{nil}, it clears the cache for
associated memory.
@defvar image-cache-eviction-delay
-This variable specifies the number of seconds an image can remain in the
-cache without being displayed. When an image is not displayed for this
-length of time, Emacs removes it from the image cache.
+This variable specifies the number of seconds an image can remain in
+the cache without being displayed. When an image is not displayed for
+this length of time, Emacs removes it from the image cache.
+
+Under some circumstances, if the number of images in the cache grows
+too large, the actual eviction delay may be shorter than this.
If the value is @code{nil}, Emacs does not remove images from the cache
except when you explicitly clear it. This mode can be useful for
table can specify a glyph to use instead of @samp{\}.)
@item
-Multibyte character codes above 256 are displayed as themselves, or as a
-question mark or empty box if the terminal cannot display that
-character.
+Multibyte character codes above 256 are displayed as themselves, or as
+a question mark or a hex code or an empty box if the terminal cannot
+display that character.
@end itemize
The usual display conventions apply even when there is a display