or from Lisp without specifying the optional argument FIND-FILE;
in that case, this function acts as if `enable-local-variables' were t."
(interactive)
- (fundamental-mode)
+ (kill-all-local-variables)
+ (unless delay-mode-hooks
+ (run-hooks 'change-major-mode-after-body-hook
+ 'after-change-major-mode-hook))
(let ((enable-local-variables (or (not find-file) enable-local-variables)))
;; FIXME this is less efficient than it could be, since both
;; s-a-m and h-l-v may parse the same regions, looking for "mode:".
(with-demoted-errors "File mode specification error: %s"
(set-auto-mode))
- (with-demoted-errors "File local-variables error: %s"
- (hack-local-variables)))
+ ;; `delay-mode-hooks' being non-nil will have prevented the major
+ ;; mode's call to `run-mode-hooks' from calling
+ ;; `hack-local-variables'. In that case, call it now.
+ (when delay-mode-hooks
+ (with-demoted-errors "File local-variables error: %s"
+ (hack-local-variables 'no-mode))))
;; Turn font lock off and on, to make sure it takes account of
;; whatever file local variables are relevant to it.
(when (and font-lock-mode
;; TODO? Warn once per file rather than once per session?
(defvar hack-local-variables--warned-lexical nil)
-(defun hack-local-variables (&optional mode-only)
+(defun hack-local-variables (&optional handle-mode)
"Parse and put into effect this buffer's local variables spec.
Uses `hack-local-variables-apply' to apply the variables.
-If MODE-ONLY is non-nil, all we do is check whether a \"mode:\"
+If HANDLE-MODE is nil, we apply all the specified local
+variables. If HANDLE-MODE is neither nil nor t, we do the same,
+except that any settings of `mode' are ignored.
+
+If HANDLE-MODE is t, all we do is check whether a \"mode:\"
is specified, and return the corresponding mode symbol, or nil.
In this case, we try to ignore minor-modes, and only return a
major-mode.
(let ((enable-local-variables
(and local-enable-local-variables enable-local-variables))
result)
- (unless mode-only
+ (unless (eq handle-mode t)
(setq file-local-variables-alist nil)
(with-demoted-errors "Directory-local variables error: %s"
;; Note this is a no-op if enable-local-variables is nil.
;; This entire function is basically a no-op if enable-local-variables
;; is nil. All it does is set file-local-variables-alist to nil.
(when enable-local-variables
- ;; This part used to ignore enable-local-variables when mode-only
- ;; was non-nil. That was inappropriate, eg consider the
+ ;; This part used to ignore enable-local-variables when handle-mode
+ ;; was t. That was inappropriate, eg consider the
;; (artificial) example of:
;; (setq local-enable-local-variables nil)
;; Open a file foo.txt that contains "mode: sh".
;; It correctly opens in text-mode.
;; M-x set-visited-file name foo.c, and it incorrectly stays in text-mode.
(unless (or (inhibit-local-variables-p)
- ;; If MODE-ONLY is non-nil, and the prop line specifies a
+ ;; If HANDLE-MODE is t, and the prop line specifies a
;; mode, then we're done, and have no need to scan further.
- (and (setq result (hack-local-variables-prop-line mode-only))
- mode-only))
+ (and (setq result (hack-local-variables-prop-line
+ (eq handle-mode t)))
+ (eq handle-mode t)))
;; Look for "Local variables:" line in last page.
(save-excursion
(goto-char (point-max))
(goto-char (point-min))
(while (not (or (eobp)
- (and mode-only result)))
+ (and (eq handle-mode t) result)))
;; Find the variable name;
(unless (looking-at hack-local-variable-regexp)
(error "Malformed local variable line: %S"
(forward-char 1)
(let ((read-circle nil))
(setq val (read (current-buffer))))
- (if mode-only
+ (if (eq handle-mode t)
(and (eq var 'mode)
;; Specifying minor-modes via mode: is
;; deprecated, but try to reject them anyway.
;; to use 'thisbuf's name in the
;; warning message.
(or (buffer-file-name thisbuf) ""))))))
+ ((and (eq var 'mode) handle-mode))
(t
(ignore-errors
(push (cons (if (eq var 'eval)
val) result))))))
(forward-line 1))))))))
;; Now we've read all the local variables.
- ;; If MODE-ONLY is non-nil, return whether the mode was specified.
- (if mode-only result
+ ;; If HANDLE-MODE is t, return whether the mode was specified.
+ (if (eq handle-mode t) result
;; Otherwise, set the variables.
(hack-local-variables-filter result nil)
(hack-local-variables-apply)))))
(error
;; The file's content might be invalid (e.g. have a merge conflict), but
;; that shouldn't prevent the user from opening the file.
- (message ".dir-locals error: %s" (error-message-string err))
+ (message "%s error: %s" dir-locals-file (error-message-string err))
nil))))
(defun dir-locals-set-directory-class (directory class &optional mtime)
(defconst dir-locals-file ".dir-locals.el"
"File that contains directory-local variables.
-It has to be constant to enforce uniform values
-across different environments and users.")
+It has to be constant to enforce uniform values across different
+environments and users.
+See also `dir-locals-file-2', whose values override this one's.
+See Info node `(elisp)Directory Local Variables' for details.")
+
+(defconst dir-locals-file-2 ".dir-locals-2.el"
+ "File that contains directory-local variables.
+This essentially a second file that can be used like
+`dir-locals-file', so that users can have specify their personal
+dir-local variables even if the current directory already has a
+`dir-locals-file' that is shared with other users (such as in a
+git repository).
+See Info node `(elisp)Directory Local Variables' for details.")
+
+(defun dir-locals--all-files (directory)
+ "Return a list of all readable dir-locals files in DIRECTORY.
+The returned list is sorted by increasing priority. That is,
+values specified in the last file should take precedence over
+those in the first."
+ (when (file-readable-p directory)
+ (let* ((file-1 (expand-file-name (if (eq system-type 'ms-dos)
+ (dosified-file-name dir-locals-file)
+ dir-locals-file)
+ directory))
+ (file-2 (when (string-match "\\.el\\'" file-1)
+ (replace-match "-2.el" t nil file-1)))
+ (out nil))
+ ;; The order here is important.
+ (dolist (f (list file-2 file-1))
+ (when (and f
+ (file-readable-p f)
+ (file-regular-p f)
+ (not (file-directory-p f)))
+ (push f out)))
+ out)))
(defun dir-locals-find-file (file)
"Find the directory-local variables for FILE.
time stored in the cache matches the current file modification time.
If not, the cache entry is cleared so that the file will be re-read.
-This function returns either nil (no directory local variables found),
-or the matching entry from `dir-locals-directory-cache' (a list),
-or the full path to the `dir-locals-file' (a string) in the case
-of no valid cache entry."
+This function returns either:
+ - nil (no directory local variables found),
+ - the matching entry from `dir-locals-directory-cache' (a list),
+ - or the full path to the directory (a string) containing at
+ least one `dir-locals-file' in the case of no valid cache
+ entry."
(setq file (expand-file-name file))
- (let* ((dir-locals-file-name
- (if (eq system-type 'ms-dos)
- (dosified-file-name dir-locals-file)
- dir-locals-file))
- (locals-file (locate-dominating-file file dir-locals-file-name))
- (dir-elt nil))
+ (let* ((locals-dir (locate-dominating-file (file-name-directory file)
+ #'dir-locals--all-files))
+ dir-elt)
;; `locate-dominating-file' may have abbreviated the name.
- (and locals-file
- (setq locals-file (expand-file-name dir-locals-file-name locals-file)))
- ;; Let dir-locals-read-from-file inform us via demoted-errors
- ;; about unreadable files, etc.
- ;; Maybe we'd want to keep searching though - that is
- ;; a locate-dominating-file issue.
-;;; (or (not (file-readable-p locals-file))
-;;; (not (file-regular-p locals-file)))
-;;; (setq locals-file nil))
+ (when locals-dir
+ (setq locals-dir (expand-file-name locals-dir)))
;; Find the best cached value in `dir-locals-directory-cache'.
(dolist (elt dir-locals-directory-cache)
(when (and (string-prefix-p (car elt) file
- (memq system-type
- '(windows-nt cygwin ms-dos)))
- (> (length (car elt)) (length (car dir-elt))))
- (setq dir-elt elt)))
+ (memq system-type
+ '(windows-nt cygwin ms-dos)))
+ (> (length (car elt)) (length (car dir-elt))))
+ (setq dir-elt elt)))
(if (and dir-elt
- (or (null locals-file)
- (<= (length (file-name-directory locals-file))
- (length (car dir-elt)))))
- ;; Found a potential cache entry. Check validity.
- ;; A cache entry with no MTIME is assumed to always be valid
- ;; (ie, set directly, not from a dir-locals file).
- ;; Note, we don't bother to check that there is a matching class
- ;; element in dir-locals-class-alist, since that's done by
- ;; dir-locals-set-directory-class.
- (if (or (null (nth 2 dir-elt))
- (let ((cached-file (expand-file-name dir-locals-file-name
- (car dir-elt))))
- (and (file-readable-p cached-file)
- (equal (nth 2 dir-elt)
- (nth 5 (file-attributes cached-file))))))
- ;; This cache entry is OK.
- dir-elt
- ;; This cache entry is invalid; clear it.
- (setq dir-locals-directory-cache
- (delq dir-elt dir-locals-directory-cache))
- ;; Return the first existing dir-locals file. Might be the same
- ;; as dir-elt's, might not (eg latter might have been deleted).
- locals-file)
+ (or (null locals-dir)
+ (<= (length locals-dir)
+ (length (car dir-elt)))))
+ ;; Found a potential cache entry. Check validity.
+ ;; A cache entry with no MTIME is assumed to always be valid
+ ;; (ie, set directly, not from a dir-locals file).
+ ;; Note, we don't bother to check that there is a matching class
+ ;; element in dir-locals-class-alist, since that's done by
+ ;; dir-locals-set-directory-class.
+ (if (or (null (nth 2 dir-elt))
+ (let ((cached-files (dir-locals--all-files (car dir-elt))))
+ ;; The entry MTIME should match the most recent
+ ;; MTIME among matching files.
+ (and cached-files
+ (= (float-time (nth 2 dir-elt))
+ (apply #'max (mapcar (lambda (f)
+ (float-time
+ (nth 5 (file-attributes f))))
+ cached-files))))))
+ ;; This cache entry is OK.
+ dir-elt
+ ;; This cache entry is invalid; clear it.
+ (setq dir-locals-directory-cache
+ (delq dir-elt dir-locals-directory-cache))
+ ;; Return the first existing dir-locals file. Might be the same
+ ;; as dir-elt's, might not (eg latter might have been deleted).
+ locals-dir)
;; No cache entry.
- locals-file)))
-
-(defun dir-locals-read-from-file (file)
- "Load a variables FILE and register a new class and instance.
-FILE is the name of the file holding the variables to apply.
-The new class name is the same as the directory in which FILE
-is found. Returns the new class name."
- (with-temp-buffer
+ locals-dir)))
+
+(defun dir-locals-read-from-dir (dir)
+ "Load all variables files in DIR and register a new class and instance.
+DIR is the absolute name of a directory which must contain at
+least one dir-local file (which is a file holding variables to
+apply).
+Return the new class name, which is a symbol named DIR."
+ (require 'map)
+ (let* ((class-name (intern dir))
+ (files (dir-locals--all-files dir))
+ (read-circle nil)
+ (success nil)
+ (variables))
(with-demoted-errors "Error reading dir-locals: %S"
- (insert-file-contents file)
- (unless (zerop (buffer-size))
- (let* ((dir-name (file-name-directory file))
- (class-name (intern dir-name))
- (variables (let ((read-circle nil))
- (read (current-buffer)))))
- (dir-locals-set-class-variables class-name variables)
- (dir-locals-set-directory-class dir-name class-name
- (nth 5 (file-attributes file)))
- class-name)))))
+ (dolist (file files)
+ (with-temp-buffer
+ (insert-file-contents file)
+ (condition-case-unless-debug nil
+ (setq variables
+ (map-merge-with 'list (lambda (a b) (map-merge 'list a b))
+ variables
+ (read (current-buffer))))
+ (end-of-file nil))))
+ (setq success t))
+ (dir-locals-set-class-variables class-name variables)
+ (dir-locals-set-directory-class
+ dir class-name
+ (seconds-to-time
+ (if success
+ (apply #'max (mapcar (lambda (file)
+ (float-time (nth 5 (file-attributes file))))
+ files))
+ ;; If there was a problem, use the values we could get but
+ ;; don't let the cache prevent future reads.
+ 0)))
+ class-name))
+
+(define-obsolete-function-alias 'dir-locals-read-from-file
+ 'dir-locals-read-from-dir "25.1")
(defcustom enable-remote-dir-locals nil
"Non-nil means dir-local variables will be applied to remote files."
(not (file-remote-p (or (buffer-file-name)
default-directory)))))
;; Find the variables file.
- (let ((variables-file (dir-locals-find-file
- (or (buffer-file-name) default-directory)))
+ (let ((dir-or-cache (dir-locals-find-file
+ (or (buffer-file-name) default-directory)))
(class nil)
(dir-name nil))
(cond
- ((stringp variables-file)
- (setq dir-name (file-name-directory variables-file)
- class (dir-locals-read-from-file variables-file)))
- ((consp variables-file)
- (setq dir-name (nth 0 variables-file))
- (setq class (nth 1 variables-file))))
+ ((stringp dir-or-cache)
+ (setq dir-name dir-or-cache
+ class (dir-locals-read-from-dir dir-or-cache)))
+ ((consp dir-or-cache)
+ (setq dir-name (nth 0 dir-or-cache))
+ (setq class (nth 1 dir-or-cache))))
(when class
(let ((variables
(dir-locals-collect-variables
;; Simulate the message printed by `ls'.
(insert (format "%s: No such file or directory\n" file))))
-(defvar kill-emacs-query-functions nil
+(defcustom kill-emacs-query-functions nil
"Functions to call with no arguments to query about killing Emacs.
If any of these functions returns nil, killing Emacs is canceled.
`save-buffers-kill-emacs' calls these functions, but `kill-emacs',
-the low level primitive, does not. See also `kill-emacs-hook'.")
+the low level primitive, does not. See also `kill-emacs-hook'."
+ :type 'hook
+ :version "25.2"
+ :group 'convenience)
(defcustom confirm-kill-emacs nil
"How to ask for confirmation when leaving Emacs.
(defun save-buffers-kill-terminal (&optional arg)
"Offer to save each buffer, then kill the current connection.
-If the current frame has no client, kill Emacs itself.
+If the current frame has no client, kill Emacs itself using
+`save-buffers-kill-emacs'.
With prefix ARG, silently save all file-visiting buffers, then kill.
(let ((delete-by-moving-to-trash nil))
(rename-file fn new-fn)))))))))
+(defsubst file-attribute-type (attributes)
+ "The type field in ATTRIBUTES returned by `file-attribute'.
+The value is either t for directory, string (name linked to) for
+symbolic link, or nil."
+ (nth 0 attributes))
+
+(defsubst file-attribute-link-number (attributes)
+ "Return the number of links in ATTRIBUTES returned by `file-attribute'."
+ (nth 1 attributes))
+
+(defsubst file-attribute-user-id (attributes)
+ "The UID field in ATTRIBUTES returned by `file-attribute'.
+This is either a string or a number. If a string value cannot be
+looked up, a numeric value, either an integer or a float, is
+returned."
+ (nth 2 attributes))
+
+(defsubst file-attribute-group-id (attributes)
+ "The GID field in ATTRIBUTES returned by `file-attribute'.
+This is either a string or a number. If a string value cannot be
+looked up, a numeric value, either an integer or a float, is
+returned."
+ (nth 3 attributes))
+
+(defsubst file-attribute-access-time (attributes)
+ "The last access time in ATTRIBUTES returned by `file-attribute'.
+This a list of integers (HIGH LOW USEC PSEC) in the same style
+as (current-time)."
+ (nth 4 attributes))
+
+(defsubst file-attribute-modification-time (attributes)
+ "The modification time in ATTRIBUTES returned by `file-attribute'.
+This is the time of the last change to the file's contents, and
+is a list of integers (HIGH LOW USEC PSEC) in the same style
+as (current-time)."
+ (nth 5 attributes))
+
+(defsubst file-attribute-status-change-time (attributes)
+ "The status modification time in ATTRIBUTES returned by `file-attribute'.
+This is the time of last change to the file's attributes: owner
+and group, access mode bits, etc, and is a list of integers (HIGH
+LOW USEC PSEC) in the same style as (current-time)."
+ (nth 6 attributes))
+
+(defsubst file-attribute-size (attributes)
+ "The size (in bytes) in ATTRIBUTES returned by `file-attribute'.
+This is a floating point number if the size is too large for an integer."
+ (nth 7 attributes))
+
+(defsubst file-attribute-modes (attributes)
+ "The file modes in ATTRIBUTES returned by `file-attribute'.
+This is a string of ten letters or dashes as in ls -l."
+ (nth 8 attributes))
+
+(defsubst file-attribute-inode-number (attributes)
+ "The inode number in ATTRIBUTES returned by `file-attribute'.
+If it is larger than what an Emacs integer can hold, this is of
+the form (HIGH . LOW): first the high bits, then the low 16 bits.
+If even HIGH is too large for an Emacs integer, this is instead
+of the form (HIGH MIDDLE . LOW): first the high bits, then the
+middle 24 bits, and finally the low 16 bits."
+ (nth 10 attributes))
+
+(defsubst file-attribute-device-number (attributes)
+ "The file system device number in ATTRIBUTES returned by `file-attribute'.
+If it is larger than what an Emacs integer can hold, this is of
+the form (HIGH . LOW): first the high bits, then the low 16 bits.
+If even HIGH is too large for an Emacs integer, this is instead
+of the form (HIGH MIDDLE . LOW): first the high bits, then the
+middle 24 bits, and finally the low 16 bits."
+ (nth 11 attributes))
+
\f
(define-key ctl-x-map "\C-f" 'find-file)
(define-key ctl-x-map "\C-r" 'find-file-read-only)