### @configure_input@
-# Copyright (C) 1992-2014 Free Software Foundation, Inc.
+# Copyright (C) 1992-2015 Free Software Foundation, Inc.
# This file is part of GNU Emacs.
# by building, but normally aren't because the distribution comes
# with them.
#
-# Delete `.dvi' files here if they are not part of the distribution.
+# Delete '.dvi' files here if they are not part of the distribution.
#
# make distclean
# Delete all files from the current directory that are created by
# configuring or building the program. If you have unpacked the
# source and built the program without creating any other files,
-# `make distclean' should leave only the files that were in the
+# 'make distclean' should leave only the files that were in the
# distribution.
#
# make maintainer-clean
# If Make doesn't predefine MAKE, set it here.
@SET_MAKE@
-# ==================== Things `configure' Might Edit ====================
+# ==================== Things 'configure' Might Edit ====================
cache_file = @cache_file@
CONFIGURE_FLAGS = --cache-file=$(cache_file)
### to install files in.
### This should be the number of the Emacs version we're building,
-### like `18.59' or `19.0'.
+### like '24.5' or '25.0.50'.
version=@version@
### This should be the name of the configuration we're building Emacs
-### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
+### for, like 'x86_64-unknown-linux-gnu' or 'powerpc-ibm-aix7.1.2.0'.
configuration=@configuration@
### The nt/ subdirectory gets built only for MinGW
NTDIR=@NTDIR@
+# 'make' verbosity.
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+
# ==================== Where To Install Things ====================
# Location to install Emacs.app under GNUstep / Mac OS X.
# not need to change them. This defaults to /usr/local.
prefix=@prefix@
-# Like `prefix', but used for architecture-specific files.
+# Like 'prefix', but used for architecture-specific files.
exec_prefix=@exec_prefix@
# Where to install Emacs and other binaries that people will want to
# Where to find the source code. The source code for Emacs's C kernel is
# expected to be in ${srcdir}/src, and the source code for Emacs's
# utility programs is expected to be in ${srcdir}/lib-src. This is
-# set by the configure script's `--srcdir' option.
+# set by the configure script's '--srcdir' option.
# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
srcdir=@srcdir@
removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
-# Generate epaths.h from epaths.in. This target is invoked by `configure'.
+# Generate epaths.h from epaths.in. This target is invoked by 'configure'.
# See comments in configure.ac for why it is done this way, as opposed
# to just letting configure generate epaths.h from epaths.in in a
# similar way to how Makefile is made from Makefile.in.
# The w32 build needs a slightly different editing, and it uses
# nt/epaths.nt as the template.
#
-# Use the value of ${locallisppath} supplied by `configure',
+# Use the value of ${locallisppath} supplied by 'configure',
# to support the --enable-locallisppath argument.
#
# In this case, the paths written to 'src/epaths.h' must be in native
src: lib-src
-# We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
+# We need to build 'emacs' in 'src' to compile the *.elc files in 'lisp'.
lisp: src
-# These targets should be "${SUBDIR} without `src'".
+# These targets should be "${SUBDIR} without 'src'".
lib lib-src lisp nt: Makefile
$(MAKE) -C $@ all
# repository pull. In git there is no single file that guarantees
# this, but the local log for the current head should be close enough.
#
-# Note the use of single quotes in the value of vcswitness.
-# This passes an unexpanded $srcdir to src's Makefile, which then
+# Pass an unexpanded $srcdir to src's Makefile, which then
# expands it using its own value of srcdir (which points to the
# source directory of src/).
+dirstate = .git/logs/HEAD
+VCSWITNESS = $(if $(wildcard $(srcdir)/$(dirstate)),$$(srcdir)/../$(dirstate))
src: Makefile
- dirstate='.git/logs/HEAD'; \
- vcswitness='$$(srcdir)/../'$$dirstate; \
- [ -r "$(srcdir)/$$dirstate" ] || vcswitness=''; \
- $(MAKE) -C $@ all VCSWITNESS="$$vcswitness"
+ $(MAKE) -C $@ VCSWITNESS='$(VCSWITNESS)' all
blessmail: Makefile src
$(MAKE) -C lib-src maybe-blessmail
@ # because stamp-h.in has changed (since building stamp-h.in
@ # refreshes config.in as well), but if config.in is missing
@ # then we really need to do something more.
- [ -r "$@" ] || ( cd ${srcdir} && ${AUTOHEADER} )
+ $(if $(wildcard $@),,cd $(srcdir) && $(AUTOHEADER))
$(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
cd ${srcdir} && ${AUTOHEADER}
- rm -f $(srcdir)/src/stamp-h.in
- echo timestamp > $(srcdir)/src/stamp-h.in
+ rm -f $@
+ echo timestamp > $@
# ==================== Installation ====================
thisdir=`/bin/pwd`; \
cd ${mansrcdir}; \
for page in *.1; do \
+ test "$$page" = ChangeLog.1 && continue; \
dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
(cd "$${thisdir}"; \
${INSTALL_DATA} ${mansrcdir}/$${page} "$(DESTDIR)${man1dir}/$${dest}"); \
install-strip:
$(MAKE) INSTALL_STRIP=-s install
-### Delete all the installed files that the `install' target would
-### create (but not the noninstalled files such as `make all' would create).
+### Delete all the installed files that the 'install' target would
+### create (but not the noninstalled files such as 'make all' would create).
###
### Don't delete the lisp and etc directories if they're in the source tree.
uninstall: uninstall-$(NTDIR) uninstall-doc
$$(MAKE) -C $(1) $(2)
endef
-### `mostlyclean'
-### Like `clean', but may refrain from deleting a few files that people
-### normally don't want to recompile. For example, the `mostlyclean'
-### target for GCC does not delete `libgcc.a', because recompiling it
+### 'mostlyclean'
+### Like 'clean', but may refrain from deleting a few files that people
+### normally don't want to recompile. For example, the 'mostlyclean'
+### target for GCC does not delete 'libgcc.a', because recompiling it
### is rarely necessary and takes a lot of time.
mostlyclean_dirs = src oldXMenu lwlib lib lib-src nt doc/emacs doc/misc \
doc/lispref doc/lispintro
[ ! -d $$dir ] || $(MAKE) -C $$dir mostlyclean; \
done
-### `clean'
+### 'clean'
### Delete all files from the current directory that are normally
### created by building the program. Don't delete the files that
### record the configuration. Also preserve files that could be made
### by building, but normally aren't because the distribution comes
### with them.
###
-### Delete `.dvi' files here if they are not part of the distribution.
+### Delete '.dvi' files here if they are not part of the distribution.
clean_dirs = $(mostlyclean_dirs) nextstep
$(foreach dir,$(clean_dirs),$(eval $(call submake_template,$(dir),clean)))
for dir in test/automated; do \
[ ! -d $$dir ] || $(MAKE) -C $$dir clean; \
done
- -rm -f etc/emacs.tmpdesktop etc/emacs.tmpappdata
+ -rm -f *.tmp etc/*.tmp*
-rm -rf info-dir.*
-### `bootclean'
+### 'bootclean'
### Delete all files that need to be remade for a clean bootstrap.
top_bootclean=\
rm -f config.cache config.log ${srcdir}/doc/man/emacs.1
-### `distclean'
+### 'distclean'
### Delete all files from the current directory that are created by
### configuring or building the program. If you have unpacked the
### source and built the program without creating any other files,
-### `make distclean' should leave only the files that were in the
+### 'make distclean' should leave only the files that were in the
### distribution.
top_distclean=\
${top_bootclean}; \
done
${top_distclean}
-### `bootstrap-clean'
-### Delete everything that can be reconstructed by `make' and that
+### 'bootstrap-clean'
+### Delete everything that can be reconstructed by 'make' and that
### needs to be deleted in order to force a bootstrap from a clean state.
$(foreach dir,$(distclean_dirs),$(eval $(call submake_template,$(dir),bootstrap-clean)))
rm -f ${srcdir}/etc/refcards/emacsver.tex
${top_bootclean}
-### `maintainer-clean'
+### 'maintainer-clean'
### Delete everything from the current directory that can be
### reconstructed with this Makefile. This typically includes
### everything deleted by distclean, plus more: C source files
### produced by Bison, tags tables, info files, and so on.
###
-### One exception, however: `make maintainer-clean' should not delete
-### `configure' even if `configure' can be remade using a rule in the
-### Makefile. More generally, `make maintainer-clean' should not delete
-### anything that needs to exist in order to run `configure' and then
+### One exception, however: 'make maintainer-clean' should not delete
+### 'configure' even if 'configure' can be remade using a rule in the
+### Makefile. More generally, 'make maintainer-clean' should not delete
+### anything that needs to exist in order to run 'configure' and then
### begin to build the program.
top_maintainer_clean=\
${top_distclean}; \
## but then we would need to depend on info-real, which would
## slow down parallelization.
${srcdir}/info/dir: ${info_dir_deps}
- ${MKDIR_P} ${srcdir}/info
- tempfile=info-dir.$$$$; \
+ $(AM_V_at)${MKDIR_P} ${srcdir}/info
+ $(AM_V_GEN)tempfile=info-dir.$$$$; \
rm -f $${tempfile}; \
(cd ${srcdir}/doc && \
AWK='${AWK}' ../build-aux/make-info-dir ${info_dir_inputs} \
# and it's not worth it. This case is only relevant if you download a
# release, then change the .texi files.
info:
- @if test "$(HAVE_MAKEINFO)" = "no"; then \
- echo "Configured --without-makeinfo, not building manuals" ; \
- else \
- $(MAKE) info-real info-dir; \
- fi
+ ifneq ($(HAVE_MAKEINFO),no)
+ $(MAKE) info-real info-dir
+ endif
## build-aux/make-info-dir expects only certain dircategories.
check-info: info
$(MAKE) MAKEFILE_NAME=force-Makefile force-Makefile
$(MAKE) all
+.PHONY: ChangeLog change-history change-history-commit
+.PHONY: master-branch-is-current no-ChangeLog unchanged-history-files
+
+# The newest revision that should not appear in the generated ChangeLog.
+gen_origin = 870287327b1fba7105599eeabac5a2aa5ebadf19
+
+# Convert git commit log to ChangeLog file. make-dist uses this.
+ChangeLog:
+ $(AM_V_GEN)distprefix=$(distprefix) srcprefix=$(srcdir)/ \
+ $(srcdir)/build-aux/gitlog-to-emacslog $(gen_origin)
+
+# The ChangeLog history files are called ChangeLog.1, ChangeLog.2, ...,
+# ChangeLog.$(CHANGELOG_HISTORY_INDEX_MAX). $(CHANGELOG_N) stands for
+# the newest (highest-numbered) ChangeLog history file.
+CHANGELOG_HISTORY_INDEX_MAX = 2
+CHANGELOG_N = ChangeLog.$(CHANGELOG_HISTORY_INDEX_MAX)
+
+# Check that we are in a good state for changing history.
+no-ChangeLog:
+ test ! -f ChangeLog
+master-branch-is-current:
+ git branch | grep -q '^\* master$$'
+unchanged-history-files:
+ x=$$(git diff-files --name-only $(CHANGELOG_N) Makefile.in) && \
+ test -z "$$x"
+
+# Copy newer commit messages to the start of the ChangeLog history file,
+# and consider them to be older.
+change-history: no-ChangeLog master-branch-is-current unchanged-history-files \
+ ChangeLog
+ (sed '/^;; [L]ocal Variables:/,$$d' <ChangeLog && cat $(CHANGELOG_N)) \
+ >$(CHANGELOG_N).tmp
+ new_origin=$$(git log --pretty=format:%H HEAD^!) && \
+ sed 's/^\(gen_origin *= *\).*/\1'"$$new_origin/" \
+ <Makefile.in >Makefile.in.tmp
+ mv $(CHANGELOG_N).tmp $(CHANGELOG_N)
+ mv Makefile.in.tmp Makefile.in
+ $(MAKE) $@-commit
+
+# If 'make change-history' fails because the newest ChangeLog history
+# file contains invalid text, fix the file by hand and then run
+# 'make change-history-commit'.
+change-history-commit:
+ git commit -m'; make $@' $(CHANGELOG_N) Makefile.in
+
.PHONY: check-declare
check-declare: