;;; simple.el --- basic editing commands for Emacs -*- lexical-binding: t -*-
-;; Copyright (C) 1985-1987, 1993-2015 Free Software Foundation, Inc.
+;; Copyright (C) 1985-1987, 1993-2016 Free Software Foundation, Inc.
;; Maintainer: emacs-devel@gnu.org
;; Keywords: internal
(put-text-property from (point) 'rear-nonsticky
(cons 'hard sticky)))))
-(declare-function electric-indent-just-newline "electric")
-(defun open-line (n &optional interactive)
+(defun open-line (n)
"Insert a newline and leave point before it.
-If `electric-indent-mode' is enabled, indent the new line if it's
-not empty.
If there is a fill prefix and/or a `left-margin', insert them on
-the new line. If the old line would have been blank, insert them
-on the old line as well.
-
-With arg N, insert N newlines.
-A non-nil INTERACTIVE argument means to run the `post-self-insert-hook'."
- (interactive "*p\np")
+the new line if the line would have been blank.
+With arg N, insert N newlines."
+ (interactive "*p")
(let* ((do-fill-prefix (and fill-prefix (bolp)))
(do-left-margin (and (bolp) (> (current-left-margin) 0)))
(loc (point-marker))
;; Don't expand an abbrev before point.
(abbrev-mode nil))
- (if (and interactive
- (looking-at-p "[[:space:]]*$"))
- (electric-indent-just-newline n)
- (newline n interactive))
+ (newline n)
(goto-char loc)
(while (> n 0)
(cond ((bolp)
is undefined. If DELETE is nil, just return the content as a string.
If DELETE is `bounds', then don't delete, but just return the
boundaries of the region as a list of (START . END) positions.
-If anything else, delete the region and return its content as a string.")
+If anything else, delete the region and return its content as a string,
+after filtering it with `filter-buffer-substring'.")
(defvar region-insert-function
(lambda (lines)
kill ring) instead of delete. Interactively, N is the prefix
arg, and KILLFLAG is set if N is explicitly specified.
+When killing, the killed text is filtered by
+`filter-buffer-substring' before it is saved in the kill ring, so
+the actual saved text might be different from what was killed.
+
In Overwrite mode, single character backward deletion may replace
tabs with spaces so as to back over columns, unless point is at
the end of the line."
Optional second arg KILLFLAG non-nil means to kill (save in kill
ring) instead of delete. Interactively, N is the prefix arg, and
-KILLFLAG is set if N was explicitly specified."
+KILLFLAG is set if N was explicitly specified.
+
+When killing, the killed text is filtered by
+`filter-buffer-substring' before it is saved in the kill ring, so
+the actual saved text might be different from what was killed."
(declare (interactive-only delete-char))
(interactive "p\nP")
(unless (integerp n)
;; the end of the line when it fails to go to the next line.
(goto-char old-point)
(next-history-element arg)
+ ;; Reset `temporary-goal-column' because a correct value is not
+ ;; calculated when `next-line' above fails by bumping against
+ ;; the bottom of the minibuffer (bug#22544).
+ (setq temporary-goal-column 0)
;; Restore the original goal column on the last line
;; of possibly multi-line input.
(goto-char (point-max))
;; the beginning of the line when it fails to go to the previous line.
(goto-char old-point)
(previous-history-element arg)
+ ;; Reset `temporary-goal-column' because a correct value is not
+ ;; calculated when `previous-line' above fails by bumping against
+ ;; the top of the minibuffer (bug#22544).
+ (setq temporary-goal-column 0)
;; Restore the original goal column on the first line
;; of possibly multi-line input.
(goto-char (minibuffer-prompt-end))
(if (= (line-number-at-pos) 1)
(move-to-column (+ old-column (1- (minibuffer-prompt-end))))
(move-to-column old-column))
- (goto-char (line-end-position)))))))
+ ;; Put the cursor at the end of the visual line instead of the
+ ;; logical line, so the next `previous-line-or-history-element'
+ ;; would move to the previous history element, not to a possible upper
+ ;; visual line from the end of logical line in `line-move-visual' mode.
+ (end-of-visual-line)
+ ;; Since `end-of-visual-line' puts the cursor at the beginning
+ ;; of the next visual line, move it one char back to the end
+ ;; of the first visual line (bug#22544).
+ (unless (eolp) (backward-char 1)))))))
(defun next-complete-history-element (n)
"Get next history element which completes the minibuffer before the point.
times an amalgamating command has been called, and the cdr are the
buffers that were changed during the last command.")
-(defvar undo-auto--current-boundary-timer nil
+(defvar undo-auto-current-boundary-timer nil
"Current timer which will run `undo-auto--boundary-timer' or nil.
If set to non-nil, this will effectively disable the timer.")
(defvar undo-auto--this-command-amalgamating nil
"Non-nil if `this-command' should be amalgamated.
This variable is set to nil by `undo-auto--boundaries' and is set
-by `undo-auto--amalgamate'." )
+by `undo-auto-amalgamate'." )
(defun undo-auto--needs-boundary-p ()
"Return non-nil if `buffer-undo-list' needs a boundary at the start."
"Return the number of amalgamating last commands or nil.
Amalgamating commands are, by default, either
`self-insert-command' and `delete-char', but can be any command
-that calls `undo-auto--amalgamate'."
+that calls `undo-auto-amalgamate'."
(car-safe undo-auto--last-boundary-cause))
(defun undo-auto--ensure-boundary (cause)
(defun undo-auto--boundary-timer ()
"Timer which will run `undo--auto-boundary-timer'."
- (setq undo-auto--current-boundary-timer nil)
+ (setq undo-auto-current-boundary-timer nil)
(undo-auto--boundaries 'timer))
(defun undo-auto--boundary-ensure-timer ()
"Ensure that the `undo-auto-boundary-timer' is set."
- (unless undo-auto--current-boundary-timer
- (setq undo-auto--current-boundary-timer
+ (unless undo-auto-current-boundary-timer
+ (setq undo-auto-current-boundary-timer
(run-at-time 10 nil #'undo-auto--boundary-timer))))
(defvar undo-auto--undoably-changed-buffers nil
(defun undo-auto--add-boundary ()
"Add an `undo-boundary' in appropriate buffers."
(undo-auto--boundaries
- (if undo-auto--this-command-amalgamating
- 'amalgamate
- 'command))
- (setq undo-auto--this-command-amalgamating nil))
+ (let ((amal undo-auto--this-command-amalgamating))
+ (setq undo-auto--this-command-amalgamating nil)
+ (if amal
+ 'amalgamate
+ 'command))))
-(defun undo-auto--amalgamate ()
+(defun undo-auto-amalgamate ()
"Amalgamate undo if necessary.
-This function can be called after an amalgamating command. It
+This function can be called before an amalgamating command. It
removes the previous `undo-boundary' if a series of such calls
have been made. By default `self-insert-command' and
`delete-char' are the only amalgamating commands, although this
function could be called by any command wishing to have this
-behaviour."
+behavior."
(let ((last-amalgamating-count
(undo-auto--last-boundary-amalgamating-number)))
(setq undo-auto--this-command-amalgamating t)
(shell-command-on-region (point) (point) command
output-buffer nil error-buffer)))))))
-(defun display-message-or-buffer (message
- &optional buffer-name not-this-window frame)
+(defun display-message-or-buffer (message &optional buffer-name action frame)
"Display MESSAGE in the echo area if possible, otherwise in a pop-up buffer.
MESSAGE may be either a string or a buffer.
-A buffer is displayed using `display-buffer' if MESSAGE is too long for
-the maximum height of the echo area, as defined by `max-mini-window-height'
+A pop-up buffer is displayed using `display-buffer' if MESSAGE is too long
+for maximum height of the echo area, as defined by `max-mini-window-height'
if `resize-mini-windows' is non-nil.
Returns either the string shown in the echo area, or when a pop-up
string and it is displayed in the echo area, it is not specified whether
the contents are inserted into the buffer anyway.
-Optional arguments NOT-THIS-WINDOW and FRAME are as for `display-buffer',
-and only used if a buffer is displayed."
+Optional arguments ACTION and FRAME are as for `display-buffer',
+and are only used if a pop-up buffer is displayed."
(cond ((and (stringp message) (not (string-match "\n" message)))
;; Trivial case where we can use the echo area
(message "%s" message))
(t
;; Buffer
(goto-char (point-min))
- (display-buffer (current-buffer)
- not-this-window frame))))))))
+ (display-buffer (current-buffer) action frame))))))))
;; We have a sentinel to prevent insertion of a termination message
(setq prefix-command--last-echo nil)
(defun internal-echo-keystrokes-prefix ()
- ;; BEWARE: Called directly from the C code.
+ ;; BEWARE: Called directly from C code.
+ ;; If the return value is non-nil, it means we are in the middle of
+ ;; a command with prefix, such as a command invoked with prefix-arg.
(if (not prefix-command--needs-update)
prefix-command--last-echo
(setq prefix-command--last-echo
If you want to append the killed region to the last killed text,
use \\[append-next-kill] before \\[kill-region].
+Any command that calls this function is a \"kill command\".
+If the previous command was also a kill command,
+the text killed this time appends to the text killed last time
+to make one entry in the kill ring.
+
+The killed text is filtered by `filter-buffer-substring' before it is
+saved in the kill ring, so the actual saved text might be different
+from what was killed.
+
If the buffer is read-only, Emacs will beep and refrain from deleting
the text, but put the text in the kill ring anyway. This means that
you can use the killing commands to copy text from a read-only buffer.
Lisp programs should use this function for killing text.
(To delete text, use `delete-region'.)
-Supply two arguments, character positions indicating the stretch of text
- to be killed.
-Any command that calls this function is a \"kill command\".
-If the previous command was also a kill command,
-the text killed this time appends to the text killed last time
-to make one entry in the kill ring.
-
-The optional argument REGION if non-nil, indicates that we're not just killing
-some text between BEG and END, but we're killing the region."
+Supply two arguments, character positions BEG and END indicating the
+ stretch of text to be killed. If the optional argument REGION is
+ non-nil, the function ignores BEG and END, and kills the current
+ region instead."
;; Pass mark first, then point, because the order matters when
;; calling `kill-append'.
(interactive (list (mark) (point) 'region))
If `interprogram-cut-function' is non-nil, also save the text for a window
system cut and paste.
-The optional argument REGION if non-nil, indicates that we're not just copying
-some text between BEG and END, but we're copying the region.
+The copied text is filtered by `filter-buffer-substring' before it is
+saved in the kill ring, so the actual saved text might be different
+from what was in the buffer.
+
+When called from Lisp, save in the kill ring the stretch of text
+between BEG and END, unless the optional argument REGION is
+non-nil, in which case ignore BEG and END, and save the current
+region instead.
This command's old key binding has been given to `kill-ring-save'."
;; Pass mark first, then point, because the order matters when
If you want to append the killed line to the last killed text,
use \\[append-next-kill] before \\[kill-ring-save].
-The optional argument REGION if non-nil, indicates that we're not just copying
-some text between BEG and END, but we're copying the region.
+The copied text is filtered by `filter-buffer-substring' before it is
+saved in the kill ring, so the actual saved text might be different
+from what was in the buffer.
+
+When called from Lisp, save in the kill ring the stretch of text
+between BEG and END, unless the optional argument REGION is
+non-nil, in which case ignore BEG and END, and save the current
+region instead.
This command is similar to `copy-region-as-kill', except that it gives
visual feedback indicating the extent of the region being copied."