-0.7.4 (?/??/2013):
+0.7.9 (?/??/2014):
------------------
+- Fixed mistaken identification of the MOK utility as the "MOK utility
+ utility."
+
+- Added detection of German-language FAT (non-)boot sector created by
+ iPartition to keep it out of the Mac boot menu.
+
+0.7.8 (3/9/2014):
+-----------------
+
+- Added "debian" directory to source, which facilitates creation of Debian
+ packages. Packages built in this way are built with GNU-EFI and don't run
+ any post-installation script, so although the rEFInd binaries are on the
+ hard disk, they aren't installed to be bootable; you must manually run
+ install.sh. Also, at least on Ubuntu, the Make.common file's /usr/lib64
+ references must be changed to /usr/lib. This is more of a proof of
+ concept and a "leg up" for distribution maintainers than anything else.
+
+- Two new options, big_icon_size and small_icon_size, set the size of
+ the first-row OS icons and of the second-row tool icons, respectively.
+ The big_icon_size option also indirectly sets the size of disk-type
+ badges; they're 1/4 the size of the big icons. Default values are 128 and
+ 48, respectively, to match the actual icon files provided with rEFInd. If
+ the icon you're using is of a different size than you've specified,
+ rEFInd scales it. For best quality, you should both provide icons drawn
+ to the right size and set the icon sizes in refind.conf.
+
+- rEFInd now automatically scales icons to fit the standard icon sizes.
+ This won't have any effect with the icons that come with rEFInd, but it
+ can help if you want to use another icon, since you needn't scale it in a
+ graphics program before using it. Note that rEFInd uses bitmap icons, so
+ scaling by a huge amount (say, a 16x16 icon to fit the standard 128x128
+ OS icon) is not likely to look good.
+
+- Added new option, banner_scale, that tells rEFInd how to handle banners:
+ Set to "noscale" (the default), banners are not scaled, although they'll
+ be cropped if they're too big for the display. This is the same as the
+ behavior in previous versions. Set to "fillscreen", rEFInd now scales the
+ banner image (larger or smaller) to fill the display.
+
+- Adjusted the post-installation script in refind.spec (used to generate
+ RPMs, and therefore also indirectly Debian packages) to search for
+ existing shim program files under the filesnames shim.efi and shimx64.efi
+ rather than just shim.efi. Ubuntu uses shimx64.efi, so Debian packages
+ were failing to detect Ubuntu's shim in previous versions. (Note,
+ however, that Ubuntu's early shim 0.1 is unsuitable for use with rEFInd
+ The newer 0.4 version that's in the repositories now should work fine;
+ it's only when installing on an older system that's NOT been updated that
+ problems might arise.
+
+0.7.7 (1/3/2014):
+-----------------
+
+- Can now specify complete paths, optionally including volumes, in
+ dont_scan_files.
+
+- Added shimx64.efi to the default dont_scan_files list.
+
+- Added windows_recovery_files token, to specify what program(s) launch a
+ Windows recovery utility; and the "windows_recovery" option to
+ "showtools," to control whether or not to display the Windows recovery
+ utility on the second row of icons.
+
+- The use_graphics_for, also_scan_dirs, dont_scan_dirs, dont_scan_files,
+ and scan_driver_dirs tokens in refind.conf now support "+" as the first
+ option, which causes the remaining options to be added to the default
+ value rather than replacing that value. (This has no practical effect for
+ scan_driver_dirs, though, since it has a null default value.)
+
+- Added support for specifying the configuration file at program launch,
+ via the "-c" parameter, as in "refind_x64.efi -c foo.conf" to use the
+ foo.conf file as the main configuration file.
+
+- Scans of ext2/3/4fs and ReiserFS partitions now omit partitions with
+ duplicate filesystem UUIDs. These are likely parts of RAID arrays and so
+ would have the same boot loaders or kernels as the first one with a given
+ UUID.
+
+- Added feature in install.sh: Script now tries to locate and mount an ESP
+ in Linux, if it's currently unmounted.
+
+- Fixed bug in mkrlconf.sh and install.sh that caused a stray line break
+ and PARTUUID= specification to appear in generated refind_linux.conf file
+ under some circumstances.
+
+0.7.6 (12/15/2013):
+-------------------
+
+- Added support for multiple "default_selection" targets. These MUST be
+ comma-separated AND enclosed in quotes, as in:
+ default_selection "fred,ginger"
+ This example will launch "fred" by default if it's available; and if
+ it's not, rEFInd will attempt to launch "ginger" as the default.
+
+- Added support for time-sensitive "default_selection" setting. This token
+ may now have either one or three options. If one, it's interpreted as it
+ has been in the past, as setting a default that's independent of times.
+ If you follow this default by two times, however, those are interpreted
+ as the start and end times (in 24-hour format) for a default setting. For
+ instance, "default_selection foo 8:00 17:00" causes foo to be the default
+ from 8:00 (AM) to 17:00 (aka 5:00 PM). You can include multiple
+ "default_selection" lines to set different defaults for a variety of
+ times. If they're in conflict, the last one takes precedence. Note that
+ times are hardware clock's native value, which may be local time or UTC,
+ depending on your computer.
+
+- Added support for a blank-screen startup: Set "screensaver -1" and the
+ screen saver will be initialized when rEFInd starts. If you set a low
+ "timeout" value, the result will be a boot straight to the default OS
+ unless you hit a key soon after rEFInd starts. Once you hit a key, the
+ screensaver will be disabled.
+
+- Added --ownhfs {target} option to install.sh. This option causes rEFInd
+ to install to an HFS+ partition in a way that's more consistent with the
+ way the Mac's native boot loader is installed. Note that you should NOT
+ install to an already-bootable partition with this option, since it will
+ overwrite the existing boot loader, which would render OS X unbootable.
+
+0.7.5 (11/10/2013):
+-------------------
+
+- Fixed bug that caused unbootable exFAT partitions to show up as
+ bootable on Macs with BIOS/CSM/legacy boot options enabled.
+
+- Fixed bug in install.sh that caused installs to the ESP on recent
+ versions of OS X to fail.
+
+- Fixed bug that caused rEFInd to hang on some Macs when multiple EFI
+ drivers were present.
+
+- Fixed bug that caused clear to default gray screen when launching OSes
+ with 'use_graphics_for' enabled, even when the rEFInd background is not
+ gray. Now rEFInd clears to the same background color used in its menu.
+ When launching OS X, though, the OS X boot loader will itself clear to
+ gray a second or so later; and when launching Linux, it will clear to
+ black a second or so later.
+
+0.7.4.1 (8/25/2013):
+--------------------
+
+- My initial 0.7.4 release broke legacy-boot ability on Macs, so I quickly
+ released this version using the original 0.7.4 filenames to fix the
+ problem.
+
+0.7.4 (8/25/2013):
+------------------
+
+- Fixed options passing to loader to include loader's filename as the first
+ option. This omission had no effect on most boot loaders, but caused
+ VMware's mboot64.efi to fail.
+
+- Added support for memtest86 as second-row option. Program must be
+ stored in EFI/tools, EFI/tools/memtest, EFI/tools/memtest86, EFI/memtest,
+ or EFI/memtest86; and must use the name memtest86.efi, memtest86_x64.efi,
+ memtest86x64.efi, or bootx64.efi (changing "x64" to "ia32" on IA-32
+ systems). The memtest86 program is scanned for when the "showtools"
+ option includes the "memtest" or "memtest86" token, which it does by
+ default.
+
+- Added space to end of "Boot %s from %s" string; enables adding a space
+ to the end of the "default_selection" item (in quotes) to set a default
+ that matches a volume name that's identical to another one except for
+ extra characters at the end of the non-wanted volume's name.
+
- Fixed bug that could cause rEFInd to hang when launching boot loaders
under some conditions. (Launching from Firewire drives on Macs is the
known case, but there may be others.)