-0.6.1 (12/??/2012):
+0.6.12 (6/18/2013):
-------------------
+- Changed the 64-bit EFI shell included in the CD-R and USB flash drive
+ images to a version 2 shell that should support the "bcfg" command.
+
+- Added support for PreBootloader to refind.spec's built-in installation
+ script.
+
+- Added support for the Linux Foundation's PreLoader to install.sh. It's
+ treated just like shim, including using the --shim option (or, now,
+ --preloader); but it searches for and copies HashTool.efi rather than
+ MokManager.efi, and filenames are adjusted appropriately.
+
+- Added code to determine Linux root filesystem from /etc/fstab file, if
+ it's on the same partition as the kernel and if the refind_linux.conf
+ file is not available. This enables rEFInd to boot Linux without any
+ rEFInd-specific configuration files on some (but not all) systems.
+
+0.6.11 (5/13/2013):
+-------------------
+
+- New feature: rEFInd now ignores symbolic links to files on filesystems
+ that support them. This prevents the "vmlinuz" symbolic link that some
+ distributions create in the root directory from appearing in the loader
+ list. Note that this does NOT affect symbolic links to directories.
+
+- Added icons for Lubuntu and Kubuntu.
+
+- Improved the install.sh script so that it does a better job dealing with
+ directory names that contain spaces.
+
+- rEFInd now tries to guess the Linux distribution type based on the kernel
+ filename (Fedora and RHEL only) or the "ID" or "NAME" variables in
+ /etc/os-release on the kernel's partition. None of these is guaranteed to
+ work. A fallback of the Tux penguin icon remains in place in case rEFInd
+ can't find anything substantive enough for a guess.
+
+- Added "EFI\opensuse" to the locations searched for MOK utilities, since
+ OpenSUSE now uses that name.
+
+- Renamed "Reboot to Firmware User Interface" to "Reboot to Computer Setup
+ Utility" in menu.
+
+- Fixed bug in gptsync that caused it to hang if the disk had too few GPT
+ partitions to fill the MBR.
+
+0.6.10 (5/5/2013):
+------------------
+
+- Added support for "screensaver" token. If set to a positive integer, this
+ causes the screen to blank after the specified number of seconds of
+ inactivity. Pressing most keys (unfortunately NOT including Shift, Alt,
+ or Ctrl) will restore the display and restart the screen saver timeout.
+
+- Added icon for ChromeOS (os_chrome.icns in the icons subdirectory).
+ ChromeBooks reportedly boots using the fallback filename, but if a user
+ wants to install rEFInd on a ChromeBook, renaming the original EFI/BOOT
+ directory to EFI/chrome and then installing rEFInd in the fallback
+ filename will bring up this new icon for ChromeOS.
+
+- Added new option to reboot the computer into the firmware's user
+ interface. This option is active by default, or can be set via the
+ "firmware" option to the "showtools" token in refind.conf. It works
+ on only some computers, though; older computers lack this feature, and
+ when rEFInd is told to use this feature on such computers, the directive
+ is quietly ignored.
+
+- Upgraded LodePNG library from version 20121216 to 20130415 and
+ restructured rEFInd-specific modifications to simplify future upgrades.
+
+- Replaced hexadecimal error code with description if an error is
+ encountered when saving a screen shot.
+
+- Enable multiple screen shots: Rather than naming all screen shots
+ "screenshot.bmp", the name is now "screenshot_###.bmp", where "###" is a
+ sequence number, starting with "001".
+
+0.6.9 (4/25/2013):
+------------------
+
+- Modified default banner to include the new rEFInd icon, provided by Erik
+ Kemperman.
+
+- Worked around a suspected firmware bug that caused rEFInd 0.6.6 to 0.6.8
+ to hang at startup on some systems (DUET and some Macs).
+
+- Modified rEFInd to search for gptsync under the names gptsync.efi and
+ gptsync_{arch}.efi, where {arch} is ia32 or x64. (Previous versions
+ searched only for gptsync.efi.)
+
+- Added gptsync program from rEFIt project, but with some changes to
+ improve flexibility and make it less likely that UEFI users will
+ accidentally trash their systems.
+
+- Changed timeout code so that the timeout continues if the keyboard is
+ disconnected. This can help in booting a headless server or a system with
+ a bluetooth or other keyboard that's not recognized by the EFI.
+
+0.6.8 (3/18/2013):
+------------------
+
+- Added workaround for presumed EFI bug that was causing "Invalid
+ Parameter" errors when scanning for boot loaders on some computers.
+
+- Added search for an EFI shell called shell.efi in the root directory
+ (previously this name was only accepted in EFI\tools).
+
+- Fixed bug in install.sh that caused it to fail on some systems (Fedora
+ 18, for instance) because of a problem identifying the ESP.
+
+- Fixed bug that caused icons named after boot loaders to not be used.
+
+0.6.7 (2/3/2013):
+-----------------
+
+- Added a more explicit error message summarizing options when a launch of
+ a program results in a Secure Boot failure.
+
+- Changed MOK tool detection to scan all volumes, not just the rEFInd
+ home volume. This is desirable because the Linux Foundation's HashTool
+ can only scan its own volume, making it desirable to place copies of this
+ program on every volume that holds EFI boot loader binaries.
+
+- Added support for launching the Linux Foundation HashTool as a means of
+ managing MOKs (or MOK hashes, at any rate).
+
+- Fixed bug that caused rEFInd to present an entry for itself as a
+ Microsoft OS if it was launched as EFI/Microsoft/Boot/bootmgfw.efi.
+
+- Fixed bug that caused dont_scan_volumes option to be added to
+ also_scan_dirs list.
+
+- Fixed dont_scan_volumes so that it works with OS X boot loaders.
+
+- Fixed broken mixing of PNG and ICNS icons when using a user-specified
+ icons directory -- previously, an ICNS file in the default directory
+ would override a PNG file in the user-specified directory.
+
+0.6.6 (1/26/2013):
+------------------
+
+- rEFInd now ignores the fallback boot loader (EFI/BOOT/bootx64.efi or
+ EFI/BOOT/bootia32.efi) if it's identical to another boot loader on
+ the same volume. This is intended to help unclutter the display on
+ systems that run Windows, since Windows tends to duplicate its own boot
+ loader under the fallback name.
+
+- Added new "font" token to refind.conf, which enables specifying a font in
+ the form of a PNG file. This file must contain monospace glyphs for the
+ 95 characters from ASCII 32 to 126 (space through tilde), inclusive, plus
+ a glyph to be displayed for characters outside of this range, for a total
+ of 96 glyphs.
+
+- Replaced the old font (inherited from rEFInd) with an anti-aliased
+ version of Luxi Mono Regular 14 point.
+
+- Fixed bug that caused rEFInd to ignore manual boot stanzas in files
+ included via the "include" token in refind.conf.
+
+- Fixed bug that caused ASSERT error on some systems (and conceivably a
+ crash on startup on some) when default_selection line in refind.conf was
+ commented out or empty.
+
+- Fixed bug that caused "Binary is whitelisted" message to persist on
+ screen after loading MOK-signed drivers in Secure Boot mode.
+
+- Fixed bug that caused rEFInd to ignore the "icon" token in refind.conf
+ manual boot stanzas.
+
+- Fixed bug in install.sh that caused the script to fail to update
+ drivers when rEFInd was installed in EFI/BOOT/.
+
+0.6.5 (1/16/2013):
+------------------
+
+- Improved text color support: rEFInd now uses black text against light
+ backgrounds and white text against dark backgrounds.
+
+- Added support for PNGs as banners, icons, and selectors.
+
+- Added icon for ALT Linux.
+
+- Added "safemode" option to "hideui" token, to hide option to boot into
+ safe mode for OS X ("-v -x" option to boot.efi).
+
+- Added icon for Haiku (os_haiku.icns).
+
+- Enable transparency of icons & main-menu text when the banner icon is
+ sized to cover these areas.
+
+- Fixed bug that could cause rEFInd to crash if fed a banner image that's
+ too big. Note that "too big" can be substantially smaller than the screen
+ resolution!
+
+0.6.4 (1/8/2013):
+-----------------
+
+- Revised install.sh to copy ext2fs driver, rather than ext4fs driver, for
+ ext2/3 filesystems. This can help keep non-functional entries from links
+ from /vmlinuz to /boot/vmlinuz out of the menu if the system uses ext4fs
+ on root and ext2fs or ext3fs on /boot.
+
+- Fixed a couple of memory management bugs that cause rEFInd to hang at
+ startup on some systems.
+
+0.6.3 (1/6/2013):
+-----------------
+
+- Added the ability to specify a volume name or number in the
+ "dont_scan_dirs" and "also_scan_dirs" tokens.
+
+- Fixed a bug that caused removable EFI media to not appear in scan lists
+ if rEFInd was installed as EFI/BOOT/boot{arch}.efi on a hard disk.
+
+- Modified ISO-9660 driver so that it can handle discs with other than
+ 2048-byte sectors. This makes it useful for reading "hybrid ISO" images
+ burned to USB flash disks.
+
+- New mvrefind.sh script to move a rEFInd installation between a standard
+ location (typically EFI/refind) and one of the fallback locations
+ (EFI/BOOT or EFI/Microsoft/Boot). It can also do more exotic locations.
+
+- The install.sh script now installs to EFI/BOOT/bootx64.efi or
+ EFI/Microsoft/Boot/bootmgfw.efi if it's run in BIOS mode. This is
+ intended to give some chance of producing a bootable installation should
+ a user accidentally install Linux in EFI mode and then install rEFInd
+ from that installation.
+
+- The install.sh script now tries to find an existing rEFInd installation
+ and upgrade it, even if it's in EFI/BOOT or EFI/Microsoft/Boot rather
+ than in EFI/refind.
+
+- New "--yes" option to install.sh to help with unattended or automated
+ installations (as from an RPM or Debian package).
+
+0.6.2 (12/30/2012):
+-------------------
+
+- Inclusion of a sample refind.spec file for the benefit of RPM
+ distribution maintainers who might want to include rEFInd. It's a bit
+ rough, but it gets you a good chunk of the way there....
+
+- The EFI filesystem drivers can now be built with the GNU-EFI toolkit as
+ well as with the TianoCore EDK2. See the BUILDING.txt file for details on
+ how to build them with either toolkit. This improvement doesn't affect
+ users of my binary packages, but it should make it easier for Linux
+ distributions to adopt rEFInd into their package systems.
+
+- Tweaked refind.inf file for better build results using "native" TianoCore
+ EDK2 build process (vs. the Makefile-based build process that I use under
+ Linux). This won't affect those who use my binary builds or build under
+ Linux with the "make" command.
+
+- Fixed bug that prevented Secure Boot launches from working when rEFInd
+ was built with GNU-EFI rather than the TianoCore EDK2.
+
+- Substantial reworking of Secure Boot code, based on James Bottomley's
+ PreLoader program. This new code eliminates the limitation of launching
+ just one driver in Secure Boot mode and is likely to be more reliable
+ with future or obscure boot loaders. It should also work with non-x86-64
+ systems, although this relies on a platform-specific shim program, which
+ to date exists only for x86-64. The basic features are the same as before
+ -- rEFInd relies on shim for authentication functions and will launch
+ programs that are signed by Secure Boot keys, shim keys, or MOKs.
+
+- Altered default for "textmode" option (when it's commented out) to not
+ adjust the text mode at all. (Prior versions set it to mode 0 by
+ default.)
+
+0.6.1 (12/21/2012):
+-------------------
+
+- Added "--root" option to install.sh, to enable installation of rEFInd
+ to something other than the currently-running OS. This is intended for
+ use on emergency discs.
+
+- Thanks to Stefan Agner, the ext4fs driver now supports the "meta_bg"
+ filesystem feature, which distributes metadata throughout the disk. This
+ feature isn't used by default, but can be set at filesystem creation time
+ by passing the "-O meta_bg,^resize_inode" option to mke2fs. (Using
+ "^resize_inode" is necessary because meta_bg is incompatible with
+ resize_inode, which IS used by default.) This feature can be used on
+ ext3fs and ext2fs as well as on ext4fs, so the ext4fs driver can now
+ handle some ext3fs and ext2fs partitions that the ext2fs driver can't
+ handle.
+
- Fixed some screen resolution-setting bugs.
- Added the "words" that make up a filesystem's label (delimited by spaces,