-0.7.8 (?/??/2014):
+0.8.4 (11/??/2014):
+-------------------
+
+- Tweaked default for dont_scan_volumes: Removed "Recovery HD". This change
+ better suits the needs of OS X 10.10 ("Yosemite") installations, but may
+ result in some stray Recovery HD entries on some Macs.
+
+- Updated icons for Fedora and Ubuntu and added an icon for Xubuntu.
+
+- Added new configuration option, "enable_and_lock_vmx", which sets an
+ Intel CPU feature that's required for some types of virtualization to
+ work. Most EFIs enable setting this feature in their own setup utilities,
+ but some (such as most Macs) don't.
+
+0.8.3 (7/6/2014):
+-----------------
+
+- Added new feature: Setting "timeout = -1" in refind.conf causes rEFInd to
+ immediately boot the default option UNLESS a keypress is in the buffer
+ when rEFInd launches. In that case, if the keypress corresponds to a
+ shortcut key, the associated boot loader is launched; or if not, the menu
+ is displayed.
+
+- Added new icons for Clover boot loader and for Mythbuntu Linux
+ distribution.
+
+- rEFInd now displays the partition's label, when one is available, when
+ offering a BIOS-mode boot option for a partition with no filesystem
+ driver. This works only on Macs doing BIOS-mode booting.
+
+- Removed GPLv2 code from the FSW core files. This was done because the
+ Btrfs driver is derived from the GRUB Btrfs driver, which is licensed
+ under the GPLv3. Ironically, the GPLv2 and GPLv3 are incompatible
+ licenses, so ensuring that the Btrfs driver doesn't rely on GPLv2 code
+ was legally necessary. In most cases, I reverted to the original rEFIt
+ code, although I kept my own cache code; since I wrote it, I can
+ change its license to a BSD license.
+
+- Fixed bug that caused rEFInd to unload drivers immediately after loading
+ them. This didn't affect rEFInd's own drivers because they didn't include
+ the unload hooks, but it did affect some other drivers.
+
+- Changed default scan_all_linux_kernels setting from "false" to "true",
+ and commented the option out in refind.conf-sample. This should not
+ affect most people, since refind.conf-sample had this option commented
+ out, and most rEFInd users either use it that way or don't have Linux
+ kernels installed at all. I've made this change because I want rEFInd to
+ "do the right thing" by default in as many cases as possible. For a while
+ now, rEFInd has been excluding non-bootable files from its menu, and most
+ kernels "in the wild" now include the EFI stub. Thus, enabling this
+ support by default seems worthwhile. If you prefer to not scan Linux
+ kernels by default, simply uncomment the "scan_all_linux_kernels" line
+ and ensure it's set to "false".
+
+0.8.2.1 (6/8/2014):
+-------------------
+
+- Removed stray bit of debugging code that caused a prompt to press a
+ key to appear at rEFInd startup.
+
+0.8.2 (6/8/2014):
+-----------------
+
+- Changed behavior when default_selection is not set: It now boots the
+ previously-booted loader, assuming it's still available; if not, rEFInd
+ boots the first loader (as it does now). Behavior is unchanged if
+ default_selection is set. Note that this behavior depends on the ability
+ of rEFInd to store an EFI variable in NVRAM. It therefore fails on
+ systems with flaky NVRAM storage. You can view the previously-booted
+ loader in the
+ /sys/firmware/efi/efivars/PreviousBoot-36d08fa7-cf0b-42f5-8f14-68df73ed3740
+ variable under Linux.
+
+- Added icon for Mageia Linux (os_mageia.png).
+
+- Fixed bug that could misidentify a not-quite-GUID as a GUID in a
+ manual boot stanza's "volume" line.
+
+- I've updated my personal build system, and therefore the rEFInd Makefiles
+ and related files, to use TianoCore UDK2014 rather than UDK2010.
+
+- Added "deep_uefi_legacy_scan" token. When not set (the default), rEFInd
+ does not modify EFI NVRAM settings when scanning for BIOS-mode boot
+ loaders on UEFI-based (non-Mac) computers. Some computers require
+ uncommenting this setting for rEFInd to reliably detect some BIOS-mode
+ boot devices. Passing "0", "off", or "false" as an option resets it to
+ the default value (useful in a loaded secondary configuration file to
+ override a setting in the main file).
+
+0.8.1 (5/15/2014):
+------------------
+
+- Fixed bug that could cause rEFInd to fail to detect boot loaders stored
+ on the root directory of a partition.
+
+- Added two new bitmap fonts to those distributed with rEFInd: Ubuntu Mono
+ and Nimbus Mono. Both come in 12-, 14-, 16-, and 24-point sizes.
+
+- Messages about pauses for scanning and re-scanning of boot loaders are
+ now suppressed when doing an initial delayed scan when scan_delay is 1
+ second.
+
+- Improved centering of legacy boot option descriptions on some systems'
+ screens.
+
+- Fixed bug that could cause a BIOS-mode boot to boot from an inappropriate
+ device if that device had an innately high boot priority (as set by the
+ firmware).
+
+- Changed icons from ICNS to PNG form. There are several reasons to do
+ this, all of them minor; but together they're enough to warrant a change.
+ PNG is more common, and therefore more accessible to most users --
+ particularly those who don't use OS X. The PNG files are smaller than
+ their ICNS equivalents. PNG supports a wider range of sizes (although I'm
+ not now using anything that ICNS doesn't support, I might in the future).
+ The icon-scaling support added a few versions ago makes ICNS's support
+ for multiple icon sizes relatively unimportant.
+
+- Reversed order of search for icons by extension: rEFInd now searches
+ for PNG files before ICNS files, rather than the other way around. This
+ makes it possible to override a volume icon for rEFInd by giving it the
+ name .VolumeIcon.png, even when a .VolumeIcon.icns file exists on the
+ volume and is used by OS X.
+
+- Fixed bug that caused .VolumeIcon.icns to take higher-than-intended
+ precedence in icon setting for OS X.
+
+- Chainloading to BIOS-mode boot loaders now works on UEFI-based PCs when
+ rEFInd is built with GNU-EFI, not just when built with Tianocore.
+
+0.8.0 (5/4/2014):
+-----------------
+
+- The "dont_scan_volumes" parameter now also works with legacy-boot
+ volumes. Unlike with EFI volumes, where the option you pass must exactly
+ match an entire volume name, when applied to legacy-boot volumes, it
+ matches any part of the description that appears beneath the item when
+ you select it in the rEFInd main menu.
+
+- Can now boot in legacy mode from second (and probably later) hard disks!
+
+- rEFInd now limits the length of the firmware name string shown in the
+ system information screen to 65 characters. This is done because at least
+ one EFI presents a longer string by default, and this causes the entire
+ information display to come up empty on 800x600 displays.
+
+- rEFInd now uses the partition's name (as stored in the GPT data
+ structures) as a fallback for the filesystem's name if the latter can't
+ be found. Exceptions are if the partition name is one of three generic
+ names used by GPT fdisk: "Microsoft basic data", "Linux filesystem", or
+ "Apple HFS/HFS+". These are ignored in favor of the descriptive fallback
+ (e.g., "20 GiB Btrfs volume")
+
+- It's now possible to specify a volume by partition GUID number in a
+ manual boot stanza. This should be more reliable (albeit also more
+ awkward) than using a filesystem number (such as fs0: or fs1:).
+
+- Fixed memory-allocation bug that could cause error message displays,
+ and possibly hangs, when re-scanning boot loaders.
+
+0.7.9 (4/20/2014):
------------------
+- Attempt to fix rEFInd perpetually re-scanning after ejecting a disc on
+ some Macs.
+
+- Added check to remove redundant (or non-functional if Secure Boot is
+ active) kernel entries for Ubuntu, which is now including two versions of
+ kernels, one signed and the other unsigned.
+
+- Fixed bug in install.sh that could cause it to display error messages
+ if the dmraid utility was not installed.
+
+- The HFS+ driver now reports a correct volume name.
+
+- Fixed some EFI filesystem driver bugs that could cause lockups under
+ some circumstances. These bugs could affect any of the filesystem
+ drivers.
+
+- Added "gdisk" option to the "showtools" configuration file token. When
+ active, this adds gdisk.efi or gdisk_{arch}.efi, if present in the
+ EFI\tools directory, to the tools row.
+
+- Fixed mistaken identification of the MOK utility as the "MOK utility
+ utility."
+
+
+0.7.8 (3/9/2014):
+-----------------
+
+- Added "debian" directory to source, which facilitates creation of Debian
+ packages. Packages built in this way are built with GNU-EFI and don't run
+ any post-installation script, so although the rEFInd binaries are on the
+ hard disk, they aren't installed to be bootable; you must manually run
+ install.sh. Also, at least on Ubuntu, the Make.common file's /usr/lib64
+ references must be changed to /usr/lib. This is more of a proof of
+ concept and a "leg up" for distribution maintainers than anything else.
+
+- Two new options, big_icon_size and small_icon_size, set the size of
+ the first-row OS icons and of the second-row tool icons, respectively.
+ The big_icon_size option also indirectly sets the size of disk-type
+ badges; they're 1/4 the size of the big icons. Default values are 128 and
+ 48, respectively, to match the actual icon files provided with rEFInd. If
+ the icon you're using is of a different size than you've specified,
+ rEFInd scales it. For best quality, you should both provide icons drawn
+ to the right size and set the icon sizes in refind.conf.
+
- rEFInd now automatically scales icons to fit the standard icon sizes.
This won't have any effect with the icons that come with rEFInd, but it
can help if you want to use another icon, since you needn't scale it in a