#
# Usage:
#
-# ./install.sh [esp]
+# ./install.sh [options]
+#
+# options include:
+# "--esp" to install to the ESP rather than to the system's root
+# filesystem. This is the default on Linux
+# "--usedefault {devicefile}" to install as default
+# (/EFI/BOOT/BOOTX64.EFI and similar) to the specified
+# device (/dev/sdd1 or whatever) without registering with
+# the NVRAM
+# "--drivers" to install drivers along with regular files
#
# The "esp" option is valid only on Mac OS X; it causes
# installation to the EFI System Partition (ESP) rather than
#
# Revision history:
#
+# 0.4.8 -- Added --usedefault & --drivers options & changed "esp" option to "--esp"
+# 0.4.5 -- Fixed check for rEFItBlesser in OS X
# 0.4.2 -- Added notice about BIOS-based OSes & made NVRAM changes in Linux smarter
# 0.4.1 -- Added check for rEFItBlesser in OS X
# 0.3.3.1 -- Fixed OS X 10.7 bug; also works as make target
# Functions used by both OS X and Linux....
#
+GetParams() {
+ InstallToEspOnMac=0
+ InstallDrivers=0
+ while [[ $# -gt 0 ]]; do
+ case $1 in
+ --esp | --ESP) InstallToEspOnMac=1
+ ;;
+ --usedefault) TargetDir=/EFI/BOOT
+ TargetPart=$2
+ shift
+ ;;
+ --drivers) InstallDrivers=1
+ ;;
+ * ) echo "Usage: $0 [--esp | --usedefault {device-file}] [--drivers]"
+ echo "Aborting!"
+ exit 1
+ esac
+ shift
+ done
+ if [[ $InstallToEspOnMac == 1 && $TargetDir == '/EFI/BOOT' ]] ; then
+ echo "You may use --esp OR --usedefault, but not both! Aborting!"
+ exit 1
+ fi
+# exit 1
+} # GetParams()
+
# Abort if the rEFInd files can't be found.
# Also sets $ConfFile to point to the configuration file, and
# $IconsDir to point to the icons directory
# Copy the rEFInd files to the ESP or OS X root partition.
# Sets Problems=1 if any critical commands fail.
CopyRefindFiles() {
- mkdir -p $InstallPart/$TargetDir &> /dev/null
- if [[ $Platform == 'EFI32' ]] ; then
- cp $RefindDir/refind_ia32.efi $InstallPart/$TargetDir
+ mkdir -p $InstallDir/$TargetDir &> /dev/null
+ if [[ $TargetDir == '/EFI/BOOT' ]] ; then
+ cp $RefindDir/refind_ia32.efi $InstallDir/$TargetDir/bootia32.efi 2> /dev/null
+ if [[ $? != 0 ]] ; then
+ echo "Note: IA32 (x86) binary not installed!"
+ fi
+ cp $RefindDir/refind_x64.efi $InstallDir/$TargetDir/bootx64.efi 2> /dev/null
if [[ $? != 0 ]] ; then
Problems=1
fi
+ if [[ $InstallDrivers == 1 ]] ; then
+ cp -r $RefindDir/drivers_* $InstallDir/$TargetDir/
+ fi
+ Refind=""
+ elif [[ $Platform == 'EFI32' ]] ; then
+ cp $RefindDir/refind_ia32.efi $InstallDir/$TargetDir
+ if [[ $? != 0 ]] ; then
+ Problems=1
+ fi
+ if [[ $InstallDrivers == 1 ]] ; then
+ mkdir -p $InstallDir/$TargetDir/drivers_ia32
+ cp -r $RefindDir/drivers_ia32/*_ia32.efi $InstallDir/$TargetDir/drivers_ia32/
+ fi
Refind="refind_ia32.efi"
elif [[ $Platform == 'EFI64' ]] ; then
- cp $RefindDir/refind_x64.efi $InstallPart/$TargetDir
+ cp $RefindDir/refind_x64.efi $InstallDir/$TargetDir
if [[ $? != 0 ]] ; then
Problems=1
fi
+ if [[ $InstallDrivers == 1 ]] ; then
+ mkdir -p $InstallDir/$TargetDir/drivers_x64
+ cp -r $RefindDir/drivers_x64/*_x64.efi $InstallDir/$TargetDir/drivers_x64/
+ fi
Refind="refind_x64.efi"
else
echo "Unknown platform! Aborting!"
fi
echo "Copied rEFInd binary file $Refind"
echo ""
- if [[ -d $InstallPart/$TargetDir/icons ]] ; then
- rm -rf $InstallPart/$TargetDir/icons-backup &> /dev/null
- mv -f $InstallPart/$TargetDir/icons $InstallPart/$TargetDir/icons-backup
+ if [[ -d $InstallDir/$TargetDir/icons ]] ; then
+ rm -rf $InstallDir/$TargetDir/icons-backup &> /dev/null
+ mv -f $InstallDir/$TargetDir/icons $InstallDir/$TargetDir/icons-backup
echo "Notice: Backed up existing icons directory as icons-backup."
fi
- cp -r $IconsDir $InstallPart/$TargetDir
+ cp -r $IconsDir $InstallDir/$TargetDir
if [[ $? != 0 ]] ; then
Problems=1
fi
- if [[ -f $InstallPart/$TargetDir/refind.conf ]] ; then
+ if [[ -f $InstallDir/$TargetDir/refind.conf ]] ; then
echo "Existing refind.conf file found; copying sample file as refind.conf-sample"
echo "to avoid collision."
echo ""
- cp -f $ConfFile $InstallPart/$TargetDir
+ cp -f $ConfFile $InstallDir/$TargetDir
if [[ $? != 0 ]] ; then
Problems=1
fi
echo "Copying sample configuration file as refind.conf; edit this file to configure"
echo "rEFInd."
echo ""
- cp -f $ConfFile $InstallPart/$TargetDir/refind.conf
+ cp -f $ConfFile $InstallDir/$TargetDir/refind.conf
if [[ $? != 0 ]] ; then
Problems=1
fi
fi
} # CopyRefindFiles()
+# Mount the partition the user specified with the --usedefault option
+MountDefaultTarget() {
+ InstallDir=/tmp/refind_install
+ mkdir -p $InstallDir
+ if [[ $OSName == 'Darwin' ]] ; then
+ mount -t msdos $TargetPart $InstallDir
+ elif [[ $OSName == 'Linux' ]] ; then
+ mount -t vfat $TargetPart $InstallDir
+ fi
+ if [[ $? != 0 ]] ; then
+ echo "Couldn't mount $TargetPart ! Aborting!"
+ rmdir $InstallDir
+ exit 1
+ fi
+ UnmountEsp=1
+} # MountDefaultTarget()
#
# A series of OS X support functions....
# Mount the ESP at /Volumes/ESP or determine its current mount
# point.
-# Sets InstallPart to the ESP mount point
+# Sets InstallDir to the ESP mount point
# Sets UnmountEsp if we mounted it
MountOSXESP() {
# Identify the ESP. Note: This returns the FIRST ESP found;
# if the system has multiple disks, this could be wrong!
- Temp=`diskutil list | grep EFI`
+ Temp=`diskutil list | grep " EFI "`
Esp=/dev/`echo $Temp | cut -f 5 -d ' '`
# If the ESP is mounted, use its current mount point....
Temp=`df | grep $Esp`
- InstallPart=`echo $Temp | cut -f 6 -d ' '`
- if [[ $InstallPart == '' ]] ; then
+ InstallDir=`echo $Temp | cut -f 6 -d ' '`
+ if [[ $InstallDir == '' ]] ; then
mkdir /Volumes/ESP &> /dev/null
mount -t msdos $Esp /Volumes/ESP
if [[ $? != 0 ]] ; then
exit 1
fi
UnmountEsp=1
- InstallPart="/Volumes/ESP"
+ InstallDir="/Volumes/ESP"
fi
} # MountOSXESP()
# Sets Problems=1 if problems found during the installation.
InstallOnOSX() {
echo "Installing rEFInd on OS X...."
- if [[ $1 == 'esp' || $1 == 'ESP' ]] ; then
+ if [[ $TargetDir == "/EFI/BOOT" ]] ; then
+ MountDefaultTarget
+ elif [[ $InstallToEspOnMac == "1" ]] ; then
MountOSXESP
else
- InstallPart="/"
+ InstallDir="/"
fi
- echo "Installing rEFInd to the partition mounted at '$InstallPart'"
+ echo "Installing rEFInd to the partition mounted at '$InstallDir'"
Platform=`ioreg -l -p IODeviceTree | grep firmware-abi | cut -d "\"" -f 4`
CopyRefindFiles
- if [[ $1 == 'esp' || $1 == 'ESP' ]] ; then
- bless --mount $InstallPart --setBoot --file $InstallPart/$TargetDir/$Refind
- else
- bless --setBoot --folder $InstallPart/$TargetDir --file $InstallPart/$TargetDir/$Refind
+ if [[ $InstallToEspOnMac == "1" ]] ; then
+ bless --mount $InstallDir --setBoot --file $InstallDir/$TargetDir/$Refind
+ elif [[ $TargetDir != "/EFI/BOOT" ]] ; then
+ bless --setBoot --folder $InstallDir/$TargetDir --file $InstallDir/$TargetDir/$Refind
fi
if [[ $? != 0 ]] ; then
Problems=1
fi
- if [[ -f /Library/StartupItems/rEFItBlesser ]] ; then
+ if [[ -f /Library/StartupItems/rEFItBlesser || -d /Library/StartupItems/rEFItBlesser ]] ; then
echo
- echo "/Library/StartupItems/rEFItBlesser file found!"
+ echo "/Library/StartupItems/rEFItBlesser found!"
echo "This program is part of rEFIt, and will cause rEFInd to fail to work after"
echo -n "its first boot. Do you want to remove rEFItBlesser (Y/N)? "
read YesNo
if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
echo "Deleting /Library/StartupItems/rEFItBlesser..."
- rm /Library/StartupItems/rEFItBlesser
+ rm -r /Library/StartupItems/rEFItBlesser
else
echo "Not deleting rEFItBlesser."
fi
echo "bless status with 'bless --info', since this is known to cause disk corruption"
echo "on some systems!!"
echo
- echo "NOTE: If you want to boot an OS via BIOS emulation (such as Windows or some"
- echo "Linux installations), you *MUST* edit the $InstallPart/$TargetDir/refind.conf"
- echo "file's 'scanfor' line to include the 'hdbios' option, and perhaps"
- echo "'biosexternal' and 'cd', as well."
- echo
} # InstallOnOSX()
# Identifies the ESP's location (/boot or /boot/efi); aborts if
# the ESP isn't mounted at either location.
-# Sets InstallPart to the ESP mount point.
+# Sets InstallDir to the ESP mount point.
FindLinuxESP() {
EspLine=`df /boot/efi | grep boot`
- InstallPart=`echo $EspLine | cut -d " " -f 6`
- EspFilesystem=`grep $InstallPart /etc/mtab | cut -d " " -f 3`
+ InstallDir=`echo $EspLine | cut -d " " -f 6`
+ EspFilesystem=`grep $InstallDir /etc/mtab | cut -d " " -f 3`
if [[ $EspFilesystem != 'vfat' ]] ; then
echo "/boot/efi doesn't seem to be on a VFAT filesystem. The ESP must be mounted at"
echo "/boot or /boot/efi and it must be VFAT! Aborting!"
exit 1
fi
- echo "ESP was found at $InstallPart using $EspFilesystem"
+ echo "ESP was found at $InstallDir using $EspFilesystem"
} # MountLinuxESP
# Uses efibootmgr to add an entry for rEFInd to the EFI's NVRAM.
Efibootmgr=`which efibootmgr 2> /dev/null`
if [[ $Efibootmgr ]] ; then
modprobe efivars &> /dev/null
- InstallDisk=`grep $InstallPart /etc/mtab | cut -d " " -f 1 | cut -c 1-8`
- PartNum=`grep $InstallPart /etc/mtab | cut -d " " -f 1 | cut -c 9-10`
+ InstallDisk=`grep $InstallDir /etc/mtab | cut -d " " -f 1 | cut -c 1-8`
+ PartNum=`grep $InstallDir /etc/mtab | cut -d " " -f 1 | cut -c 9-10`
EntryFilename=$TargetDir/$Refind
EfiEntryFilename=`echo ${EntryFilename//\//\\\}`
EfiEntryFilename2=`echo ${EfiEntryFilename} | sed s/\\\\\\\\/\\\\\\\\\\\\\\\\/g`
# Sets Problems=1 if something goes wrong.
InstallOnLinux() {
echo "Installing rEFInd on Linux...."
- FindLinuxESP
+ if [[ $TargetDir == "/EFI/BOOT" ]] ; then
+ MountDefaultTarget
+ else
+ FindLinuxESP
+ fi
CpuType=`uname -m`
if [[ $CpuType == 'x86_64' ]] ; then
Platform="EFI64"
exit 1
fi
CopyRefindFiles
- AddBootEntry
+ if [[ $TargetDir != "/EFI/BOOT" ]] ; then
+ AddBootEntry
+ fi
} # InstallOnLinux()
#
# install under OS X or Linux, depending on the detected platform.
#
+GetParams $@
OSName=`uname -s`
ThisDir="$( cd -P "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
RefindDir="$ThisDir/refind"
CheckForFiles
if [[ `whoami` != "root" ]] ; then
echo "Not running as root; attempting to elevate privileges via sudo...."
- sudo $ThisScript $1
+ sudo $ThisScript $1 $2 $3
if [[ $? != 0 ]] ; then
echo "This script must be run as root (or using sudo). Exiting!"
exit 1
fi
if [[ $UnmountEsp ]] ; then
- umount $InstallPart
+ echo "Unmounting install dir"
+ umount $InstallDir
+fi
+
+if [[ $InstallDir == /tmp/refind_install ]] ; then
+# sleep 5
+ rmdir $InstallDir
fi