-0.6.10 (?/??/2013):
+0.7.7 (12/??/2013):
-------------------
+- Added support for specifying the configuration file at program launch,
+ via the "-c" parameter, as in "refind_x64.efi -c foo.conf" to use the
+ foo.conf file as the main configuration file.
+
+- Scans of ext2/3/4fs and ReiserFS partitions now omit partitions with
+ duplicate filesystem UUIDs. These are likely parts of RAID arrays and so
+ would have the same boot loaders or kernels as the first one with a given
+ UUID.
+
+- Added feature in install.sh: Script now tries to locate and mount an ESP
+ in Linux, if it's currently unmounted.
+
+- Fixed bug in mkrlconf.sh and install.sh that caused a stray line break
+ and PARTUUID= specification to appear in generated refind_linux.conf file
+ under some circumstances.
+
+0.7.6 (12/15/2013):
+-------------------
+
+- Added support for multiple "default_selection" targets. These MUST be
+ comma-separated AND enclosed in quotes, as in:
+ default_selection "fred,ginger"
+ This example will launch "fred" by default if it's available; and if
+ it's not, rEFInd will attempt to launch "ginger" as the default.
+
+- Added support for time-sensitive "default_selection" setting. This token
+ may now have either one or three options. If one, it's interpreted as it
+ has been in the past, as setting a default that's independent of times.
+ If you follow this default by two times, however, those are interpreted
+ as the start and end times (in 24-hour format) for a default setting. For
+ instance, "default_selection foo 8:00 17:00" causes foo to be the default
+ from 8:00 (AM) to 17:00 (aka 5:00 PM). You can include multiple
+ "default_selection" lines to set different defaults for a variety of
+ times. If they're in conflict, the last one takes precedence. Note that
+ times are hardware clock's native value, which may be local time or UTC,
+ depending on your computer.
+
+- Added support for a blank-screen startup: Set "screensaver -1" and the
+ screen saver will be initialized when rEFInd starts. If you set a low
+ "timeout" value, the result will be a boot straight to the default OS
+ unless you hit a key soon after rEFInd starts. Once you hit a key, the
+ screensaver will be disabled.
+
+- Added --ownhfs {target} option to install.sh. This option causes rEFInd
+ to install to an HFS+ partition in a way that's more consistent with the
+ way the Mac's native boot loader is installed. Note that you should NOT
+ install to an already-bootable partition with this option, since it will
+ overwrite the existing boot loader, which would render OS X unbootable.
+
+0.7.5 (11/10/2013):
+-------------------
+
+- Fixed bug that caused unbootable exFAT partitions to show up as
+ bootable on Macs with BIOS/CSM/legacy boot options enabled.
+
+- Fixed bug in install.sh that caused installs to the ESP on recent
+ versions of OS X to fail.
+
+- Fixed bug that caused rEFInd to hang on some Macs when multiple EFI
+ drivers were present.
+
+- Fixed bug that caused clear to default gray screen when launching OSes
+ with 'use_graphics_for' enabled, even when the rEFInd background is not
+ gray. Now rEFInd clears to the same background color used in its menu.
+ When launching OS X, though, the OS X boot loader will itself clear to
+ gray a second or so later; and when launching Linux, it will clear to
+ black a second or so later.
+
+0.7.4.1 (8/25/2013):
+--------------------
+
+- My initial 0.7.4 release broke legacy-boot ability on Macs, so I quickly
+ released this version using the original 0.7.4 filenames to fix the
+ problem.
+
+0.7.4 (8/25/2013):
+------------------
+
+- Fixed options passing to loader to include loader's filename as the first
+ option. This omission had no effect on most boot loaders, but caused
+ VMware's mboot64.efi to fail.
+
+- Added support for memtest86 as second-row option. Program must be
+ stored in EFI/tools, EFI/tools/memtest, EFI/tools/memtest86, EFI/memtest,
+ or EFI/memtest86; and must use the name memtest86.efi, memtest86_x64.efi,
+ memtest86x64.efi, or bootx64.efi (changing "x64" to "ia32" on IA-32
+ systems). The memtest86 program is scanned for when the "showtools"
+ option includes the "memtest" or "memtest86" token, which it does by
+ default.
+
+- Added space to end of "Boot %s from %s" string; enables adding a space
+ to the end of the "default_selection" item (in quotes) to set a default
+ that matches a volume name that's identical to another one except for
+ extra characters at the end of the non-wanted volume's name.
+
+- Fixed bug that could cause rEFInd to hang when launching boot loaders
+ under some conditions. (Launching from Firewire drives on Macs is the
+ known case, but there may be others.)
+
+0.7.3 (8/7/2013):
+-----------------
+
+- Fixed bug that caused missing media-type badges on BIOS-mode boot
+ loaders on Macs.
+
+- Fixed bug that caused failure when launching BIOS-mode OSes on Macs.
+
+0.7.2 (8/6/2013):
+-----------------
+
+- Fixed bug that caused display glitches in the final entry on the first
+ row of icons if the second row of icons was empty.
+
+- Fixed bug that could cause incorrect scanning or even a rEFInd crash when
+ using volume specification in also_scan_dirs token.
+
+- Added protection against loading invalid drivers and other EFI programs.
+ (Some EFIs crash when attempting to load such drivers and programs.)
+
+- Added PreLoader.efi and shim-fedora.efi to default dont_scan_files list;
+ it's now "shim.efi, shim-fedora.efi, PreLoader.efi, TextMode.efi,
+ ebounce.efi, GraphicsConsole.efi, MokManager.efi, HashTool.efi,
+ HashTool-signed.efi".
+
+- Added icon for Funtoo Linux.
+
+- Fixed reading of volume badges from user-specified icons directory, which
+ was broken.
+
+- Fixed handling of /.VolumeBadge.icns (or /.VolumeBadge.png) files, which
+ was broken.
+
+0.7.1 (7/8/2013):
+-----------------
+
+- Fixed build problem with recent development versions of EDK2.
+
+- Added scan for Boot Repair's backup of the Windows boot loader
+ (bkpbootmgfw.efi). If found, give separate entries for it and for
+ bootmgfw.efi, each with its own descriptive text label.
+
+- Fixed also_scan_dirs; used to have bug that caused it to ignore
+ volume specification, if present.
+
+- Fixed bug in driver cache that caused Btrfs driver to hang sometimes.
+
+0.7.0 (6/27/2013):
+------------------
+
+- Added Btrfs signature to rEFInd, so that it can identify the filesystem
+ type for volumes that lack labels.
+
+- Changed some critical filesystem driver pointers from 32-bit to 64-bit.
+ This *SHOULD* enable use of over-2TiB filesystems (for those filesystems
+ that support such large volumes). This capability is largely untested,
+ though.
+
+- Added a cache to the filesystem driver core, and therefore to all the
+ filesystem drivers. This cache greatly improves performance in
+ VirtualBox, and offers modest performance improvements on a few "real"
+ computers. The most dramatic improvement is on ext2/3fs under VirtualBox:
+ Loading a kernel and initrd used to take ~200 seconds on my system, but
+ now takes ~3 seconds! On most "real" hardware, the improvement is much
+ less dramatic -- an improvement of a second or less, presumably because
+ of cacheing within the EFI or on the hard disk itself.
+
+- Filter boot loaders based on a test of their validity; keeps out Linux
+ kernels without EFI stub loader code, loaders for the wrong architecture,
+ non-EFI loaders, etc.
+
+- New Btrfs driver, contributed by Samuel Liao based on GRUB 2.00 Btrfs
+ code.
+
+0.6.12 (6/18/2013):
+-------------------
+
+- Changed the 64-bit EFI shell included in the CD-R and USB flash drive
+ images to a version 2 shell that should support the "bcfg" command.
+
+- Added support for PreBootloader to refind.spec's built-in installation
+ script.
+
+- Added support for the Linux Foundation's PreLoader to install.sh. It's
+ treated just like shim, including using the --shim option (or, now,
+ --preloader); but it searches for and copies HashTool.efi rather than
+ MokManager.efi, and filenames are adjusted appropriately.
+
+- Added code to determine Linux root filesystem from /etc/fstab file, if
+ it's on the same partition as the kernel and if the refind_linux.conf
+ file is not available. This enables rEFInd to boot Linux without any
+ rEFInd-specific configuration files on some (but not all) systems.
+
+0.6.11 (5/13/2013):
+-------------------
+
+- New feature: rEFInd now ignores symbolic links to files on filesystems
+ that support them. This prevents the "vmlinuz" symbolic link that some
+ distributions create in the root directory from appearing in the loader
+ list. Note that this does NOT affect symbolic links to directories.
+
+- Added icons for Lubuntu and Kubuntu.
+
+- Improved the install.sh script so that it does a better job dealing with
+ directory names that contain spaces.
+
+- rEFInd now tries to guess the Linux distribution type based on the kernel
+ filename (Fedora and RHEL only) or the "ID" or "NAME" variables in
+ /etc/os-release on the kernel's partition. None of these is guaranteed to
+ work. A fallback of the Tux penguin icon remains in place in case rEFInd
+ can't find anything substantive enough for a guess.
+
+- Added "EFI\opensuse" to the locations searched for MOK utilities, since
+ OpenSUSE now uses that name.
+
+- Renamed "Reboot to Firmware User Interface" to "Reboot to Computer Setup
+ Utility" in menu.
+
+- Fixed bug in gptsync that caused it to hang if the disk had too few GPT
+ partitions to fill the MBR.
+
+0.6.10 (5/5/2013):
+------------------
+
+- Added support for "screensaver" token. If set to a positive integer, this
+ causes the screen to blank after the specified number of seconds of
+ inactivity. Pressing most keys (unfortunately NOT including Shift, Alt,
+ or Ctrl) will restore the display and restart the screen saver timeout.
+
+- Added icon for ChromeOS (os_chrome.icns in the icons subdirectory).
+ ChromeBooks reportedly boots using the fallback filename, but if a user
+ wants to install rEFInd on a ChromeBook, renaming the original EFI/BOOT
+ directory to EFI/chrome and then installing rEFInd in the fallback
+ filename will bring up this new icon for ChromeOS.
+
- Added new option to reboot the computer into the firmware's user
interface. This option is active by default, or can be set via the
"firmware" option to the "showtools" token in refind.conf. It works