Add 2012 to FSF copyright years for Emacs files

[gnu-emacs] / doc / emacs / trouble.texi

@c This is part of the Emacs manual.
@c Copyright (C) 1985-1987, 1993-1995, 1997, 2001-2012
@c   Free Software Foundation, Inc.
@c See file emacs.texi for copying conditions.
@iftex
@chapter Dealing with Common Problems

  If you type an Emacs command you did not intend, the results are often
mysterious.  This chapter tells what you can do to cancel your mistake or
recover from a mysterious situation.  Emacs bugs and system crashes are
also considered.
@end iftex

@ifnottex
@raisesections
@end ifnottex

@node Quitting
@section Quitting and Aborting
@cindex quitting

@table @kbd
@item C-g
@itemx C-@key{BREAK} @r{(MS-DOS only)}
Quit: cancel running or partially typed command.
@item C-]
Abort innermost recursive editing level and cancel the command which
invoked it (@code{abort-recursive-edit}).
@item @key{ESC} @key{ESC} @key{ESC}
Either quit or abort, whichever makes sense (@code{keyboard-escape-quit}).
@item M-x top-level
Abort all recursive editing levels that are currently executing.
@item C-/
@itemx C-x u
@itemx C-_
Cancel a previously made change in the buffer contents (@code{undo}).
@end table

  There are two ways of canceling a command before it has finished:
@dfn{quitting} with @kbd{C-g}, and @dfn{aborting} with @kbd{C-]} or
@kbd{M-x top-level}.  Quitting cancels a partially typed command, or
one which is still running.  Aborting exits a recursive editing level
and cancels the command that invoked the recursive edit.
(@xref{Recursive Edit}.)

@cindex quitting
@kindex C-g
  Quitting with @kbd{C-g} is the way to get rid of a partially typed
command, or a numeric argument that you don't want.  Furthermore, if
you are in the middle of a command that is running, @kbd{C-g} stops
the command in a relatively safe way.  For example, if you quit out of
a kill command that is taking a long time, either your text will
@emph{all} still be in the buffer, or it will @emph{all} be in the
kill ring, or maybe both.  If the region is active, @kbd{C-g}
deactivates the mark, unless Transient Mark mode is off
(@pxref{Disabled Transient Mark}).  If you are in the middle of an
incremental search, @kbd{C-g} does special things; it may take two
successive @kbd{C-g} characters to get out of a search.
@xref{Incremental Search}, for details.

  On MS-DOS, the character @kbd{C-@key{BREAK}} serves as a quit character
like @kbd{C-g}.  The reason is that it is not feasible, on MS-DOS, to
recognize @kbd{C-g} while a command is running, between interactions
with the user.  By contrast, it @emph{is} feasible to recognize
@kbd{C-@key{BREAK}} at all times.
@iftex
@xref{MS-DOS Keyboard,,,emacs-xtra, Specialized Emacs Features}.
@end iftex
@ifnottex
@xref{MS-DOS Keyboard}.
@end ifnottex

@findex keyboard-quit
  @kbd{C-g} works by setting the variable @code{quit-flag} to @code{t}
the instant @kbd{C-g} is typed; Emacs Lisp checks this variable
frequently, and quits if it is non-@code{nil}.  @kbd{C-g} is only
actually executed as a command if you type it while Emacs is waiting for
input.  In that case, the command it runs is @code{keyboard-quit}.

  On a text terminal, if you quit with @kbd{C-g} a second time before
the first @kbd{C-g} is recognized, you activate the ``emergency
escape'' feature and return to the shell.  @xref{Emergency Escape}.

@cindex NFS and quitting
  There are some situations where you cannot quit.  When Emacs is
waiting for the operating system to do something, quitting is
impossible unless special pains are taken for the particular system
call within Emacs where the waiting occurs.  We have done this for the
system calls that users are likely to want to quit from, but it's
possible you will encounter a case not handled.  In one very common
case---waiting for file input or output using NFS---Emacs itself knows
how to quit, but many NFS implementations simply do not allow user
programs to stop waiting for NFS when the NFS server is hung.

@cindex aborting recursive edit
@findex abort-recursive-edit
@kindex C-]
  Aborting with @kbd{C-]} (@code{abort-recursive-edit}) is used to get
out of a recursive editing level and cancel the command which invoked
it.  Quitting with @kbd{C-g} does not do this, and could not do this,
because it is used to cancel a partially typed command @emph{within} the
recursive editing level.  Both operations are useful.  For example, if
you are in a recursive edit and type @kbd{C-u 8} to enter a numeric
argument, you can cancel that argument with @kbd{C-g} and remain in the
recursive edit.

@findex keyboard-escape-quit
@kindex ESC ESC ESC
  The sequence @kbd{@key{ESC} @key{ESC} @key{ESC}}
(@code{keyboard-escape-quit}) can either quit or abort.  (We defined
it this way because @key{ESC} means ``get out'' in many PC programs.)
It can cancel a prefix argument, clear a selected region, or get out
of a Query Replace, like @kbd{C-g}.  It can get out of the minibuffer
or a recursive edit, like @kbd{C-]}.  It can also get out of splitting
the frame into multiple windows, as with @kbd{C-x 1}.  One thing it
cannot do, however, is stop a command that is running.  That's because
it executes as an ordinary command, and Emacs doesn't notice it until
it is ready for the next command.

@findex top-level
  The command @kbd{M-x top-level} is equivalent to ``enough''
@kbd{C-]} commands to get you out of all the levels of recursive edits
that you are in; it also exits the minibuffer if it is active.
@kbd{C-]} gets you out one level at a time, but @kbd{M-x top-level}
goes out all levels at once.  Both @kbd{C-]} and @kbd{M-x top-level}
are like all other commands, and unlike @kbd{C-g}, in that they take
effect only when Emacs is ready for a command.  @kbd{C-]} is an
ordinary key and has its meaning only because of its binding in the
keymap.  @xref{Recursive Edit}.

  @kbd{C-/} (@code{undo}) is not strictly speaking a way of canceling
a command, but you can think of it as canceling a command that already
finished executing.  @xref{Undo}, for more information about the undo
facility.

@node Lossage, Bugs, Quitting, Top
@section Dealing with Emacs Trouble

  This section describes various conditions in which Emacs fails to work
normally, and how to recognize them and correct them.  For a list of
additional problems you might encounter, see @ref{Bugs and problems, ,
Bugs and problems, efaq, GNU Emacs FAQ}, and the file @file{etc/PROBLEMS}
in the Emacs distribution.  Type @kbd{C-h C-f} to read the FAQ; type
@kbd{C-h C-p} to read the @file{PROBLEMS} file.

@menu
* DEL Does Not Delete::   What to do if @key{DEL} doesn't delete.
* Stuck Recursive::       `[...]' in mode line around the parentheses.
* Screen Garbled::        Garbage on the screen.
* Text Garbled::          Garbage in the text.
* Memory Full::           How to cope when you run out of memory.
* After a Crash::         Recovering editing in an Emacs session that crashed.
* Emergency Escape::      Emergency escape---
                            What to do if Emacs stops responding.
* Total Frustration::     When you are at your wits' end.
@end menu

@node DEL Does Not Delete
@subsection If @key{DEL} Fails to Delete
@cindex @key{DEL} vs @key{BACKSPACE}
@cindex @key{BACKSPACE} vs @key{DEL}
@cindex usual erasure key

  Every keyboard has a large key, usually labeled @key{Backspace},
which is ordinarily used to erase the last character that you typed.
We call this key @dfn{the usual erasure key}.  In Emacs, it is
supposed to be equivalent to @key{DEL}.

  When Emacs starts up on a graphical display, it determines
automatically which key should be @key{DEL}.  In some unusual cases,
Emacs gets the wrong information from the system.  If the usual
erasure key deletes forwards instead of backwards, that is probably
what happened---Emacs ought to be treating the @key{Backspace} key as
@key{DEL}, but it isn't.

  Some keyboards also have a @key{Delete} key, which is ordinarily
used to delete forwards.  If this key deletes backward in Emacs, that
too suggests Emacs got the wrong information---but in the opposite
sense.

  On a text-only terminal, if you find the usual erasure key prompts
for a Help command, like @kbd{Control-h}, instead of deleting a
character, it means that key is actually sending the @key{BS}
character.  Emacs ought to be treating @key{BS} as @key{DEL}, but it
isn't.

  In all of those cases, the immediate remedy is the same: use the
command @kbd{M-x normal-erase-is-backspace-mode}.  This toggles
between the two modes that Emacs supports for handling @key{DEL}, so
if Emacs starts in the wrong mode, this should switch to the right
mode.  On a text-only terminal, if you want to ask for help when
@key{BS} is treated as @key{DEL}, use @key{F1}; @kbd{C-?} may also
work, if it sends character code 127.

@findex normal-erase-is-backspace-mode
  To fix the problem automatically for every Emacs session, you can
put one of the following lines into your @file{.emacs} file
(@pxref{Init File}).  For the first case above, where @key{Backspace}
deletes forwards instead of backwards, use this line to make
@key{Backspace} act as @key{DEL} (resulting in behavior compatible
with Emacs 20 and previous versions):

@lisp
(normal-erase-is-backspace-mode 0)
@end lisp

@noindent
For the other two cases, use this line:

@lisp
(normal-erase-is-backspace-mode 1)
@end lisp

@vindex normal-erase-is-backspace
  Another way to fix the problem for every Emacs session is to
customize the variable @code{normal-erase-is-backspace}: the value
@code{t} specifies the mode where @key{BS} or @key{BACKSPACE} is
@key{DEL}, and @code{nil} specifies the other mode.  @xref{Easy
Customization}.

@node Stuck Recursive
@subsection Recursive Editing Levels

  Recursive editing levels are important and useful features of Emacs, but
they can seem like malfunctions if you do not understand them.

  If the mode line has square brackets @samp{[@dots{}]} around the parentheses
that contain the names of the major and minor modes, you have entered a
recursive editing level.  If you did not do this on purpose, or if you
don't understand what that means, you should just get out of the recursive
editing level.  To do so, type @kbd{M-x top-level}.  This is called getting
back to top level.  @xref{Recursive Edit}.

@node Screen Garbled
@subsection Garbage on the Screen

  If the text on a text terminal looks wrong, the first thing to do is
see whether it is wrong in the buffer.  Type @kbd{C-l} to redisplay
the entire screen.  If the screen appears correct after this, the
problem was entirely in the previous screen update.  (Otherwise, see
the following section.)

  Display updating problems often result from an incorrect terminfo
entry for the terminal you are using.  The file @file{etc/TERMS} in
the Emacs distribution gives the fixes for known problems of this
sort.  @file{INSTALL} contains general advice for these problems in
one of its sections.  To investigate the possibility that you have
this sort of problem, try Emacs on another terminal made by a
different manufacturer.  If problems happen frequently on one kind of
terminal but not another kind, it is likely to be a bad terminfo entry,
though it could also be due to a bug in Emacs that appears for
terminals that have or that lack specific features.

@node Text Garbled
@subsection Garbage in the Text

  If @kbd{C-l} shows that the text is wrong, first type @kbd{C-h l} to
see what commands you typed to produce the observed results.  Then try
undoing the changes step by step using @kbd{C-x u}, until it gets back
to a state you consider correct.

  If a large portion of text appears to be missing at the beginning or
end of the buffer, check for the word @samp{Narrow} in the mode line.
If it appears, the text you don't see is probably still present, but
temporarily off-limits.  To make it accessible again, type @kbd{C-x n
w}.  @xref{Narrowing}.

@node Memory Full
@subsection Running out of Memory
@cindex memory full
@cindex out of memory

  If you get the error message @samp{Virtual memory exceeded}, save
your modified buffers with @kbd{C-x s}.  This method of saving them
has the smallest need for additional memory.  Emacs keeps a reserve of
memory which it makes available when this error happens; that should
be enough to enable @kbd{C-x s} to complete its work.  When the
reserve has been used, @samp{!MEM FULL!} appears at the beginning of
the mode line, indicating there is no more reserve.

  Once you have saved your modified buffers, you can exit this Emacs
session and start another, or you can use @kbd{M-x kill-some-buffers}
to free space in the current Emacs job.  If this frees up sufficient
space, Emacs will refill its memory reserve, and @samp{!MEM FULL!}
will disappear from the mode line.  That means you can safely go on
editing in the same Emacs session.

  Do not use @kbd{M-x buffer-menu} to save or kill buffers when you run
out of memory, because the buffer menu needs a fair amount of memory
itself, and the reserve supply may not be enough.

@node After a Crash
@subsection Recovery After a Crash

  If Emacs or the computer crashes, you can recover the files you were
editing at the time of the crash from their auto-save files.  To do
this, start Emacs again and type the command @kbd{M-x recover-session}.

  This command initially displays a buffer which lists interrupted
session files, each with its date.  You must choose which session to
recover from.  Typically the one you want is the most recent one.  Move
point to the one you choose, and type @kbd{C-c C-c}.

  Then @code{recover-session} considers each of the files that you
were editing during that session; for each such file, it asks whether
to recover that file.  If you answer @kbd{y} for a file, it shows the
dates of that file and its auto-save file, then asks once again
whether to recover that file.  For the second question, you must
confirm with @kbd{yes}.  If you do, Emacs visits the file but gets the
text from the auto-save file.

  When @code{recover-session} is done, the files you've chosen to
recover are present in Emacs buffers.  You should then save them.  Only
this---saving them---updates the files themselves.

  As a last resort, if you had buffers with content which were not
associated with any files, or if the autosave was not recent enough to
have recorded important changes, you can use the
@file{etc/emacs-buffer.gdb} script with GDB (the GNU Debugger) to
retrieve them from a core dump--provided that a core dump was saved,
and that the Emacs executable was not stripped of its debugging
symbols.

  As soon as you get the core dump, rename it to another name such as
@file{core.emacs}, so that another crash won't overwrite it.

  To use this script, run @code{gdb} with the file name of your Emacs
executable and the file name of the core dump, e.g. @samp{gdb
/usr/bin/emacs core.emacs}.  At the @code{(gdb)} prompt, load the
recovery script: @samp{source /usr/src/emacs/etc/emacs-buffer.gdb}.
Then type the command @code{ybuffer-list} to see which buffers are
available.  For each buffer, it lists a buffer number.  To save a
buffer, use @code{ysave-buffer}; you specify the buffer number, and
the file name to write that buffer into.  You should use a file name
which does not already exist; if the file does exist, the script does
not make a backup of its old contents.

@node Emergency Escape
@subsection Emergency Escape

  On text-only terminals, the @dfn{emergency escape} feature suspends
Emacs immediately if you type @kbd{C-g} a second time before Emacs can
actually respond to the first one by quitting.  This is so you can
always get out of GNU Emacs no matter how badly it might be hung.
When things are working properly, Emacs recognizes and handles the
first @kbd{C-g} so fast that the second one won't trigger emergency
escape.  However, if some problem prevents Emacs from handling the
first @kbd{C-g} properly, then the second one will get you back to the
shell.

  When you resume Emacs after a suspension caused by emergency escape,
it asks two questions before going back to what it had been doing:

@example
Auto-save? (y or n)
Abort (and dump core)? (y or n)
@end example

@noindent
Answer each one with @kbd{y} or @kbd{n} followed by @key{RET}.

  Saying @kbd{y} to @samp{Auto-save?} causes immediate auto-saving of
all modified buffers in which auto-saving is enabled.  Saying @kbd{n}
skips this.

  Saying @kbd{y} to @samp{Abort (and dump core)?} causes Emacs to
crash, dumping core.  This is to enable a wizard to figure out why
Emacs was failing to quit in the first place.  Execution does not
continue after a core dump.

  If you answer this question @kbd{n}, Emacs execution resumes.  With
luck, Emacs will ultimately do the requested quit.  If not, each
subsequent @kbd{C-g} invokes emergency escape again.

  If Emacs is not really hung, just slow, you may invoke the double
@kbd{C-g} feature without really meaning to.  Then just resume and
answer @kbd{n} to both questions, and you will get back to the former
state.  The quit you requested will happen by and by.

  Emergency escape is active only for text terminals.  On graphical
displays, you can use the mouse to kill Emacs or switch to another
program.

  On MS-DOS, you must type @kbd{C-@key{BREAK}} (twice) to cause
emergency escape---but there are cases where it won't work, when
system call hangs or when Emacs is stuck in a tight loop in C code.

@node Total Frustration
@subsection Help for Total Frustration
@cindex Eliza
@cindex doctor

  If using Emacs (or something else) becomes terribly frustrating and none
of the techniques described above solve the problem, Emacs can still help
you.

  First, if the Emacs you are using is not responding to commands, type
@kbd{C-g C-g} to get out of it and then start a new one.

@findex doctor
  Second, type @kbd{M-x doctor @key{RET}}.

  The Emacs psychotherapist will help you feel better.  Each time you
say something to the psychotherapist, you must end it by typing
@key{RET} @key{RET}.  This indicates you are finished typing.

@node Bugs, Contributing, Lossage, Top
@section Reporting Bugs

@cindex bugs
  If you think you have found a bug in Emacs, please report it.  We
cannot promise to fix it, or always to agree that it is a bug, but we
certainly want to hear about it.  The same applies for new features
you would like to see added.  The following sections will help you to
construct an effective bug report.

@menu
* Known Problems::               How to read about known problems and bugs.
* Criteria:  Bug Criteria.       Have you really found a bug?
* Understanding Bug Reporting::  How to report a bug effectively.
* Checklist::                    Steps to follow for a good bug report.
* Sending Patches::              How to send a patch for GNU Emacs.
@end menu

@node Known Problems
@subsection Reading Existing Bug Reports and Known Problems

  Before reporting a bug, if at all possible please check to see if it
is already known about.  Indeed, it may already have been fixed in a
later release of Emacs, or in the development version.  Here is a list
of the main places you can read about known issues:

@itemize
@item
The @file{etc/PROBLEMS} file in the Emacs distribution; type @kbd{C-h
C-p} to read it.  This file contains a list of particularly well-known
issues that have been encountered in compiling, installing and running
Emacs.  Often, there are suggestions for workarounds and solutions.

@item
Some additional user-level problems can be found in @ref{Bugs and
problems, , Bugs and problems, efaq, GNU Emacs FAQ}.

@item
The @samp{bug-gnu-emacs} mailing list (also available as the newsgroup
@samp{gnu.emacs.bug}).  You can read the list archives at
@url{http://lists.gnu.org/mailman/listinfo/bug-gnu-emacs}.  If you
like, you can also subscribe to the list.  Be aware that the sole
purpose of this list is to provide the Emacs maintainers with
information about bugs and feature requests.  Reports may contain
fairly large amounts of data; spectators should not complain about
this.

@item
The bug tracker at @url{http://debbugs.gnu.org}.  From early 2008,
reports from the @samp{bug-gnu-emacs} list have also been sent here.
The tracker contains the same information as the mailing list, just in
a different format.  You may prefer to browse and read reports using
the tracker.

@item
The @samp{emacs-pretest-bug} mailing list.  This list is no longer
used, and is mainly of historical interest.  At one time, it was used
for bug reports in development (i.e., not yet released) versions of
Emacs.  You can read the archives for 2003 to mid 2007 at
@url{http://lists.gnu.org/archive/html/emacs-pretest-bug/}.  From
late 2007 to mid 2008, the address was an alias for the
@samp{emacs-devel} mailing list.  From mid 2008 onwards, it has been
an alias for @samp{bug-gnu-emacs}.

@item
The @samp{emacs-devel} mailing list.  Sometimes people report bugs to
this mailing list.  This is not the main purpose of the list, however,
and it is much better to send bug reports to the bug list.  You should
not feel obliged to read this list before reporting a bug.

@end itemize


@node Bug Criteria
@subsection When Is There a Bug

  If Emacs accesses an invalid memory location (``segmentation
fault''), or exits with an operating system error message that
indicates a problem in the program (as opposed to something like
``disk full''), then it is certainly a bug.

  If Emacs updates the display in a way that does not correspond to what is
in the buffer, then it is certainly a bug.  If a command seems to do the
wrong thing but the problem corrects itself if you type @kbd{C-l}, it is a
case of incorrect display updating.

  Taking forever to complete a command can be a bug, but you must make
certain that it was really Emacs's fault.  Some commands simply take a
long time.  Type @kbd{C-g} (@kbd{C-@key{BREAK}} on MS-DOS) and then @kbd{C-h l}
to see whether the input Emacs received was what you intended to type;
if the input was such that you @emph{know} it should have been processed
quickly, report a bug.  If you don't know whether the command should
take a long time, find out by looking in the manual or by asking for
assistance.

  If a command you are familiar with causes an Emacs error message in a
case where its usual definition ought to be reasonable, it is probably a
bug.

  If a command does the wrong thing, that is a bug.  But be sure you know
for certain what it ought to have done.  If you aren't familiar with the
command, or don't know for certain how the command is supposed to work,
then it might actually be working right.  Rather than jumping to
conclusions, show the problem to someone who knows for certain.

  Finally, a command's intended definition may not be the best
possible definition for editing with.  This is a very important sort
of problem, but it is also a matter of judgment.  Also, it is easy to
come to such a conclusion out of ignorance of some of the existing
features.  It is probably best not to complain about such a problem
until you have checked the documentation in the usual ways, feel
confident that you understand it, and know for certain that what you
want is not available.  Ask other Emacs users, too.  If you are not
sure what the command is supposed to do after a careful reading of the
manual, check the index and glossary for any terms that may be
unclear.

  If after careful rereading of the manual you still do not understand
what the command should do, that indicates a bug in the manual, which
you should report.  The manual's job is to make everything clear to
people who are not Emacs experts---including you.  It is just as
important to report documentation bugs as program bugs.

  If the on-line documentation string of a function or variable disagrees
with the manual, one of them must be wrong; that is a bug.

@node Understanding Bug Reporting
@subsection Understanding Bug Reporting

@findex emacs-version
  When you decide that there is a bug, it is important to report it and to
report it in a way which is useful.  What is most useful is an exact
description of what commands you type, starting with the shell command to
run Emacs, until the problem happens.

  The most important principle in reporting a bug is to report
@emph{facts}.  Hypotheses and verbal descriptions are no substitute for
the detailed raw data.  Reporting the facts is straightforward, but many
people strain to posit explanations and report them instead of the
facts.  If the explanations are based on guesses about how Emacs is
implemented, they will be useless; meanwhile, lacking the facts, we will
have no real information about the bug.

  For example, suppose that you type @kbd{C-x C-f /glorp/baz.ugh
@key{RET}}, visiting a file which (you know) happens to be rather
large, and Emacs displays @samp{I feel pretty today}.  The best way to
report the bug is with a sentence like the preceding one, because it
gives all the facts.

  A bad way would be to assume that the problem is due to the size of
the file and say, ``I visited a large file, and Emacs displayed @samp{I
feel pretty today}.''  This is what we mean by ``guessing
explanations.''  The problem is just as likely to be due to the fact
that there is a @samp{z} in the file name.  If this is so, then when we
got your report, we would try out the problem with some ``large file,''
probably with no @samp{z} in its name, and not see any problem.  There
is no way in the world that we could guess that we should try visiting a
file with a @samp{z} in its name.

  Alternatively, the problem might be due to the fact that the file starts
with exactly 25 spaces.  For this reason, you should make sure that you
inform us of the exact contents of any file that is needed to reproduce the
bug.  What if the problem only occurs when you have typed the @kbd{C-x C-a}
command previously?  This is why we ask you to give the exact sequence of
characters you typed since starting the Emacs session.

  You should not even say ``visit a file'' instead of @kbd{C-x C-f} unless
you @emph{know} that it makes no difference which visiting command is used.
Similarly, rather than saying ``if I have three characters on the line,''
say ``after I type @kbd{@key{RET} A B C @key{RET} C-p},'' if that is
the way you entered the text.

  So please don't guess any explanations when you report a bug.  If you
want to actually @emph{debug} the problem, and report explanations that
are more than guesses, that is useful---but please include the facts as
well.

@node Checklist
@subsection Checklist for Bug Reports

@cindex reporting bugs

  Before reporting a bug, first try to see if the problem has already
been reported (@pxref{Known Problems}).

If you are able to, try the latest release of Emacs to see if the
problem has already been fixed.  Even better is to try the latest
development version.  We recognize that this is not easy for some
people, so do not feel that you absolutely must do this before making
a report.

@findex report-emacs-bug
  The best way to write a bug report for Emacs is to use the command
@kbd{M-x report-emacs-bug}.  This sets up a mail buffer
(@pxref{Sending Mail}) and automatically inserts @emph{some} of the
essential information.  However, it cannot supply all the necessary
information; you should still read and follow the guidelines below, so
you can enter the other crucial information by hand before you send
the message.  You may feel that some of the information inserted by
@kbd{M-x report-emacs-bug} is not relevant, but unless you are
absolutely sure it is best to leave it, so that the developers can
decide for themselves.

When you have finished writing your report, type @kbd{C-c C-c} and it
will be sent to the Emacs maintainers at @email{bug-gnu-emacs@@gnu.org}.
(If you want to suggest an improvement or new feature, use the same
address.)  If you cannot send mail from inside Emacs, you can copy the
text of your report to your normal mail client and send it to that
address.  Or you can simply send an email to that address describing
the problem.

Your report will be sent to the @samp{bug-gnu-emacs} mailing list, and
stored in the tracker at @url{http://debbugs.gnu.org}.  Please try to
include a valid reply email address, in case we need to ask you for
more information about your report.  Submissions are moderated, so
there may be a delay before your report appears.

You do not need to know how the @url{http://debbugs.gnu.org} bug
tracker works in order to report a bug, but if you want to, you can
read the tracker's online documentation to see the various features
you can use.

All mail sent to the @samp{bug-gnu-emacs} mailing list is also
gatewayed to the @samp{gnu.emacs.bug} newsgroup.  The reverse is also
true, but we ask you not to post bug reports (or replies) via the
newsgroup.  It can make it much harder to contact you if we need to ask
for more information, and it does not integrate well with the bug
tracker.

If your data is more than 500,000 bytes, please don't include it
directly in the bug report; instead, offer to send it on request, or
make it available by ftp and say where.

  To enable maintainers to investigate a bug, your report
should include all these things:

@itemize @bullet
@item
The version number of Emacs.  Without this, we won't know whether there is any
point in looking for the bug in the current version of GNU Emacs.

@kbd{M-x report-emacs-bug} includes this information automatically,
but if you are not using that command for your report you can get the
version number by typing @kbd{M-x emacs-version @key{RET}}.  If that
command does not work, you probably have something other than GNU
Emacs, so you will have to report the bug somewhere else.

@item
The type of machine you are using, and the operating system name and
version number (again, automatically included by @kbd{M-x
report-emacs-bug}).  @kbd{M-x emacs-version @key{RET}} provides this
information too.  Copy its output from the @samp{*Messages*} buffer,
so that you get it all and get it accurately.

@item
The operands given to the @code{configure} command when Emacs was
installed (automatically included by @kbd{M-x report-emacs-bug}).

@item
A complete list of any modifications you have made to the Emacs source.
(We may not have time to investigate the bug unless it happens in an
unmodified Emacs.  But if you've made modifications and you don't tell
us, you are sending us on a wild goose chase.)

Be precise about these changes.  A description in English is not
enough---send a context diff for them.

Adding files of your own, or porting to another machine, is a
modification of the source.

@item
Details of any other deviations from the standard procedure for installing
GNU Emacs.

@item
The complete text of any files needed to reproduce the bug.

  If you can tell us a way to cause the problem without visiting any files,
please do so.  This makes it much easier to debug.  If you do need files,
make sure you arrange for us to see their exact contents.  For example, it
can matter whether there are spaces at the ends of lines, or a
newline after the last line in the buffer (nothing ought to care whether
the last line is terminated, but try telling the bugs that).

@item
The precise commands we need to type to reproduce the bug.
If at all possible, give a full recipe for an Emacs started with the
@samp{-Q} option (@pxref{Initial Options}).  This bypasses your
@file{.emacs} customizations.

@findex open-dribble-file
@cindex dribble file
@cindex logging keystrokes
One way to record the input to Emacs precisely is to write a dribble
file.  To start the file, use the @kbd{M-x open-dribble-file
@key{RET}} command.  From then on, Emacs copies all your input to the
specified dribble file until the Emacs process is killed.

@item
@findex open-termscript
@cindex termscript file
@cindex @env{TERM} environment variable
For possible display bugs, the terminal type (the value of environment
variable @env{TERM}), the complete termcap entry for the terminal from
@file{/etc/termcap} (since that file is not identical on all machines),
and the output that Emacs actually sent to the terminal.

The way to collect the terminal output is to execute the Lisp expression

@example
(open-termscript "~/termscript")
@end example

@noindent
using @kbd{M-:} or from the @samp{*scratch*} buffer just after
starting Emacs.  From then on, Emacs copies all terminal output to the
specified termscript file as well, until the Emacs process is killed.
If the problem happens when Emacs starts up, put this expression into
your @file{.emacs} file so that the termscript file will be open when
Emacs displays the screen for the first time.

Be warned: it is often difficult, and sometimes impossible, to fix a
terminal-dependent bug without access to a terminal of the type that
stimulates the bug.

@item
If non-@acronym{ASCII} text or internationalization is relevant, the locale that
was current when you started Emacs.  On GNU/Linux and Unix systems, or
if you use a Posix-style shell such as Bash, you can use this shell
command to view the relevant values:

@smallexample
echo LC_ALL=$LC_ALL LC_COLLATE=$LC_COLLATE LC_CTYPE=$LC_CTYPE \
  LC_MESSAGES=$LC_MESSAGES LC_TIME=$LC_TIME LANG=$LANG
@end smallexample

Alternatively, use the @command{locale} command, if your system has it,
to display your locale settings.

You can use the @kbd{M-!} command to execute these commands from
Emacs, and then copy the output from the @samp{*Messages*} buffer into
the bug report.  Alternatively, @kbd{M-x getenv @key{RET} LC_ALL
@key{RET}} will display the value of @code{LC_ALL} in the echo area, and
you can copy its output from the @samp{*Messages*} buffer.

@item
A description of what behavior you observe that you believe is
incorrect.  For example, ``The Emacs process gets a fatal signal,'' or,
``The resulting text is as follows, which I think is wrong.''

Of course, if the bug is that Emacs gets a fatal signal, then one can't
miss it.  But if the bug is incorrect text, the maintainer might fail to
notice what is wrong.  Why leave it to chance?

Even if the problem you experience is a fatal signal, you should still
say so explicitly.  Suppose something strange is going on, such as, your
copy of the source is out of sync, or you have encountered a bug in the
C library on your system.  (This has happened!)  Your copy might crash
and the copy here might not.  If you @emph{said} to expect a crash, then
when Emacs here fails to crash, we would know that the bug was not
happening.  If you don't say to expect a crash, then we would not know
whether the bug was happening---we would not be able to draw any
conclusion from our observations.

@item
If the bug is that the Emacs Manual or the Emacs Lisp Reference Manual
fails to describe the actual behavior of Emacs, or that the text is
confusing, copy in the text from the online manual which you think is
at fault.  If the section is small, just the section name is enough.

@item
If the manifestation of the bug is an Emacs error message, it is
important to report the precise text of the error message, and a
backtrace showing how the Lisp program in Emacs arrived at the error.

To get the error message text accurately, copy it from the
@samp{*Messages*} buffer into the bug report.  Copy all of it, not just
part.

@findex toggle-debug-on-error
@pindex Edebug
To make a backtrace for the error, use @kbd{M-x toggle-debug-on-error}
before the error happens (that is to say, you must give that command
and then make the bug happen).  This causes the error to start the Lisp
debugger, which shows you a backtrace.  Copy the text of the
debugger's backtrace into the bug report.  @xref{Debugger,, The Lisp
Debugger, elisp, the Emacs Lisp Reference Manual}, for information on
debugging Emacs Lisp programs with the Edebug package.

This use of the debugger is possible only if you know how to make the
bug happen again.  If you can't make it happen again, at least copy
the whole error message.

@vindex debug-on-quit
If Emacs appears to be stuck in an infinite loop or in a very long
operation, typing @kbd{C-g} with the variable @code{debug-on-quit}
non-@code{nil} will start the Lisp debugger and show a backtrace.
This backtrace is useful for debugging such long loops, so if you can
produce it, copy it into the bug report.

@item
Check whether any programs you have loaded into the Lisp world,
including your @file{.emacs} file, set any variables that may affect the
functioning of Emacs.  Also, see whether the problem happens in a
freshly started Emacs without loading your @file{.emacs} file (start
Emacs with the @code{-Q} switch to prevent loading the init files).  If
the problem does @emph{not} occur then, you must report the precise
contents of any programs that you must load into the Lisp world in order
to cause the problem to occur.

@item
If the problem does depend on an init file or other Lisp programs that
are not part of the standard Emacs system, then you should make sure it
is not a bug in those programs by complaining to their maintainers
first.  After they verify that they are using Emacs in a way that is
supposed to work, they should report the bug.

@item
If you wish to mention something in the GNU Emacs source, show the line
of code with a few lines of context.  Don't just give a line number.

The line numbers in the development sources don't match those in your
sources.  It would take extra work for the maintainers to determine what
code is in your version at a given line number, and we could not be
certain.

@item
Additional information from a C debugger such as GDB might enable
someone to find a problem on a machine which he does not have available.
If you don't know how to use GDB, please read the GDB manual---it is not
very long, and using GDB is easy.  You can find the GDB distribution,
including the GDB manual in online form, in most of the same places you
can find the Emacs distribution.  To run Emacs under GDB, you should
switch to the @file{src} subdirectory in which Emacs was compiled, then
do @samp{gdb emacs}.  It is important for the directory @file{src} to be
current so that GDB will read the @file{.gdbinit} file in this
directory.

However, you need to think when you collect the additional information
if you want it to show what causes the bug.

@cindex backtrace for bug reports
For example, many people send just a backtrace, but that is not very
useful by itself.  A simple backtrace with arguments often conveys
little about what is happening inside GNU Emacs, because most of the
arguments listed in the backtrace are pointers to Lisp objects.  The
numeric values of these pointers have no significance whatever; all that
matters is the contents of the objects they point to (and most of the
contents are themselves pointers).

@findex debug_print
To provide useful information, you need to show the values of Lisp
objects in Lisp notation.  Do this for each variable which is a Lisp
object, in several stack frames near the bottom of the stack.  Look at
the source to see which variables are Lisp objects, because the debugger
thinks of them as integers.

To show a variable's value in Lisp syntax, first print its value, then
use the user-defined GDB command @code{pr} to print the Lisp object in
Lisp syntax.  (If you must use another debugger, call the function
@code{debug_print} with the object as an argument.)  The @code{pr}
command is defined by the file @file{.gdbinit}, and it works only if you
are debugging a running process (not with a core dump).

To make Lisp errors stop Emacs and return to GDB, put a breakpoint at
@code{Fsignal}.

For a short listing of Lisp functions running, type the GDB
command @code{xbacktrace}.

The file @file{.gdbinit} defines several other commands that are useful
for examining the data types and contents of Lisp objects.  Their names
begin with @samp{x}.  These commands work at a lower level than
@code{pr}, and are less convenient, but they may work even when
@code{pr} does not, such as when debugging a core dump or when Emacs has
had a fatal signal.

@cindex debugging Emacs, tricks and techniques
More detailed advice and other useful techniques for debugging Emacs
are available in the file @file{etc/DEBUG} in the Emacs distribution.
That file also includes instructions for investigating problems
whereby Emacs stops responding (many people assume that Emacs is
``hung,'' whereas in fact it might be in an infinite loop).

To find the file @file{etc/DEBUG} in your Emacs installation, use the
directory name stored in the variable @code{data-directory}.
@end itemize

Here are some things that are not necessary in a bug report:

@itemize @bullet
@item
A description of the envelope of the bug---this is not necessary for a
reproducible bug.

Often people who encounter a bug spend a lot of time investigating
which changes to the input file will make the bug go away and which
changes will not affect it.

This is often time-consuming and not very useful, because the way we
will find the bug is by running a single example under the debugger
with breakpoints, not by pure deduction from a series of examples.
You might as well save time by not searching for additional examples.
It is better to send the bug report right away, go back to editing,
and find another bug to report.

Of course, if you can find a simpler example to report @emph{instead} of
the original one, that is a convenience.  Errors in the output will be
easier to spot, running under the debugger will take less time, etc.

However, simplification is not vital; if you can't do this or don't have
time to try, please report the bug with your original test case.

@item
A core dump file.

Debugging the core dump might be useful, but it can only be done on
your machine, with your Emacs executable.  Therefore, sending the core
dump file to the Emacs maintainers won't be useful.  Above all, don't
include the core file in an email bug report!  Such a large message
can be extremely inconvenient.

@item
A system-call trace of Emacs execution.

System-call traces are very useful for certain special kinds of
debugging, but in most cases they give little useful information.  It is
therefore strange that many people seem to think that @emph{the} way to
report information about a crash is to send a system-call trace.  Perhaps
this is a habit formed from experience debugging programs that don't
have source code or debugging symbols.

In most programs, a backtrace is normally far, far more informative than
a system-call trace.  Even in Emacs, a simple backtrace is generally
more informative, though to give full information you should supplement
the backtrace by displaying variable values and printing them as Lisp
objects with @code{pr} (see above).

@item
A patch for the bug.

A patch for the bug is useful if it is a good one.  But don't omit the
other information that a bug report needs, such as the test case, on the
assumption that a patch is sufficient.  We might see problems with your
patch and decide to fix the problem another way, or we might not
understand it at all.  And if we can't understand what bug you are
trying to fix, or why your patch should be an improvement, we mustn't
install it.

@ifnottex
@xref{Sending Patches}, for guidelines on how to make it easy for us to
understand and install your patches.
@end ifnottex

@item
A guess about what the bug is or what it depends on.

Such guesses are usually wrong.  Even experts can't guess right about
such things without first using the debugger to find the facts.
@end itemize

@node Sending Patches
@subsection Sending Patches for GNU Emacs

@cindex sending patches for GNU Emacs
@cindex patches, sending
  If you would like to write bug fixes or improvements for GNU Emacs,
that is very helpful.  When you send your changes, please follow these
guidelines to make it easy for the maintainers to use them.  If you
don't follow these guidelines, your information might still be useful,
but using it will take extra work.  Maintaining GNU Emacs is a lot of
work in the best of circumstances, and we can't keep up unless you do
your best to help.

@itemize @bullet
@item
Send an explanation with your changes of what problem they fix or what
improvement they bring about.  For a fix for an existing bug, it is
best to reply to the relevant discussion on the @samp{bug-gnu-emacs}
list, or item in the @url{http://debbugs.gnu.org} tracker.  Explain
why your change fixes the bug.

@item
Always include a proper bug report for the problem you think you have
fixed.  We need to convince ourselves that the change is right before
installing it.  Even if it is correct, we might have trouble
understanding it if we don't have a way to reproduce the problem.

@item
Include all the comments that are appropriate to help people reading the
source in the future understand why this change was needed.

@item
Don't mix together changes made for different reasons.
Send them @emph{individually}.

If you make two changes for separate reasons, then we might not want to
install them both.  We might want to install just one.  If you send them
all jumbled together in a single set of diffs, we have to do extra work
to disentangle them---to figure out which parts of the change serve
which purpose.  If we don't have time for this, we might have to ignore
your changes entirely.

If you send each change as soon as you have written it, with its own
explanation, then two changes never get tangled up, and we can consider
each one properly without any extra work to disentangle them.

@item
Send each change as soon as that change is finished.  Sometimes people
think they are helping us by accumulating many changes to send them all
together.  As explained above, this is absolutely the worst thing you
could do.

Since you should send each change separately, you might as well send it
right away.  That gives us the option of installing it immediately if it
is important.

@item
Use @samp{diff -c} to make your diffs.  Diffs without context are hard
to install reliably.  More than that, they are hard to study; we must
always study a patch to decide whether we want to install it.  Unidiff
format is better than contextless diffs, but not as easy to read as
@samp{-c} format.

If you have GNU diff, use @samp{diff -c -F'^[_a-zA-Z0-9$]+ *('} when
making diffs of C code.  This shows the name of the function that each
change occurs in.

@item
Avoid any ambiguity as to which is the old version and which is the new.
Please make the old version the first argument to diff, and the new
version the second argument.  And please give one version or the other a
name that indicates whether it is the old version or your new changed
one.

@item
Write the change log entries for your changes.  This is both to save us
the extra work of writing them, and to help explain your changes so we
can understand them.

The purpose of the change log is to show people where to find what was
changed.  So you need to be specific about what functions you changed;
in large functions, it's often helpful to indicate where within the
function the change was.

On the other hand, once you have shown people where to find the change,
you need not explain its purpose in the change log.  Thus, if you add a
new function, all you need to say about it is that it is new.  If you
feel that the purpose needs explaining, it probably does---but put the
explanation in comments in the code.  It will be more useful there.

Please read the @file{ChangeLog} files in the @file{src} and
@file{lisp} directories to see what sorts of information to put in,
and to learn the style that we use.  @xref{Change Log}.

@item
When you write the fix, keep in mind that we can't install a change that
would break other systems.  Please think about what effect your change
will have if compiled on another type of system.

Sometimes people send fixes that @emph{might} be an improvement in
general---but it is hard to be sure of this.  It's hard to install
such changes because we have to study them very carefully.  Of course,
a good explanation of the reasoning by which you concluded the change
was correct can help convince us.

The safest changes are changes to the configuration files for a
particular machine.  These are safe because they can't create new bugs
on other machines.

Please help us keep up with the workload by designing the patch in a
form that is clearly safe to install.
@end itemize

@node Contributing, Service, Bugs, Top
@section Contributing to Emacs Development
@cindex contributing to Emacs

If you would like to help pretest Emacs releases to assure they work
well, or if you would like to work on improving Emacs, please contact
the maintainers at @email{emacs-devel@@gnu.org}.  A pretester
should be prepared to investigate bugs as well as report them.  If you'd
like to work on improving Emacs, please ask for suggested projects or
suggest your own ideas.

If you have already written an improvement, please tell us about it.  If
you have not yet started work, it is useful to contact
@email{emacs-devel@@gnu.org} before you start; it might be
possible to suggest ways to make your extension fit in better with the
rest of Emacs.

The development version of Emacs can be downloaded from the
repository where it is actively maintained by a group of developers.
See the Emacs project page
@url{http://savannah.gnu.org/projects/emacs/} for details.

For more information on how to contribute, see the @file{etc/CONTRIBUTE}
file in the Emacs distribution.

@node Service, Copying, Contributing, Top
@section How To Get Help with GNU Emacs

If you need help installing, using or changing GNU Emacs, there are two
ways to find it:

@itemize @bullet
@item
Send a message to the mailing list
@email{help-gnu-emacs@@gnu.org}, or post your request on
newsgroup @code{gnu.emacs.help}.  (This mailing list and newsgroup
interconnect, so it does not matter which one you use.)

@item
Look in the service directory for someone who might help you for a fee.
The service directory is found in the file named @file{etc/SERVICE} in the
Emacs distribution.
@end itemize

@ifnottex
@lowersections
@end ifnottex