#include "commands.h"
-/* Nonzero during writing of auto-save files. */
-static int auto_saving;
+/* True during writing of auto-save files. */
+static bool auto_saving;
/* Nonzero umask during creation of auto-save directories. */
-static int auto_saving_dir_umask;
+static mode_t auto_saving_dir_umask;
/* Set by auto_save_1 to mode of original file so Fwrite_region will create
a new file with the same mode as the original. */
-static int auto_save_mode_bits;
+static mode_t auto_save_mode_bits;
/* Set by auto_save_1 if an error occurred during the last auto-save. */
-static int auto_save_error_occurred;
+static bool auto_save_error_occurred;
/* The symbol bound to coding-system-for-read when
insert-file-contents is called for recovering a file. This is not
static Lisp_Object Qcar_less_than_car;
-static int a_write (int, Lisp_Object, ptrdiff_t, ptrdiff_t,
- Lisp_Object *, struct coding_system *);
-static int e_write (int, Lisp_Object, ptrdiff_t, ptrdiff_t,
- struct coding_system *);
+static bool a_write (int, Lisp_Object, ptrdiff_t, ptrdiff_t,
+ Lisp_Object *, struct coding_system *);
+static bool e_write (int, Lisp_Object, ptrdiff_t, ptrdiff_t,
+ struct coding_system *);
\f
void
which has no existing file. To make this work, PREFIX should be
an absolute file name.
- BASE64_P non-zero means add the pid as 3 characters in base64
+ BASE64_P means add the pid as 3 characters in base64
encoding. In this case, 6 characters will be added to PREFIX to
form the file name. Otherwise, if Emacs is running on a system
with long file names, add the pid as a decimal number.
generated. */
Lisp_Object
-make_temp_name (Lisp_Object prefix, int base64_p)
+make_temp_name (Lisp_Object prefix, bool base64_p)
{
Lisp_Object val;
int len, clen;
struct passwd *pw;
#ifdef DOS_NT
int drive = 0;
- int collapse_newdir = 1;
- int is_escaped = 0;
+ bool collapse_newdir = 1;
+ bool is_escaped = 0;
#endif /* DOS_NT */
ptrdiff_t length;
Lisp_Object handler, result, handled_name;
/* If it turns out that the filename we want to return is just a
suffix of FILENAME, we don't need to go through and edit
things; we just need to construct a new string using data
- starting at the middle of FILENAME. If we set lose to a
- non-zero value, that means we've discovered that we can't do
- that cool trick. */
- int lose = 0;
+ starting at the middle of FILENAME. If we set LOSE, that
+ means we've discovered that we can't do that cool trick. */
+ bool lose = 0;
char *p = nm;
while (*p)
ptrdiff_t tlen;
unsigned char *target;
struct passwd *pw;
- int lose;
CHECK_STRING (name);
nm = SDATA (name);
If no /./ or /../ we can return right away. */
if (nm[0] == '/')
{
+ bool lose = 0;
p = nm;
- lose = 0;
while (*p)
{
if (p[0] == '/' && p[1] == '/'
#endif
\f
/* If /~ or // appears, discard everything through first slash. */
-static int
+static bool
file_name_absolute_p (const char *filename)
{
return
those `/' is discarded. */)
(Lisp_Object filename)
{
- char *nm;
-
- register char *s, *p, *o, *x, *endp;
+ char *nm, *s, *p, *o, *x, *endp;
char *target = NULL;
int total = 0;
- int substituted = 0;
+ bool substituted = 0;
bool multibyte;
char *xnm;
Lisp_Object handler;
}
\f
/* Signal an error if the file ABSNAME already exists.
- If INTERACTIVE is nonzero, ask the user whether to proceed,
+ If INTERACTIVE, ask the user whether to proceed,
and bypass the error if the user says to go ahead.
QUERYSTRING is a name for the action that is being considered
to alter the file.
If the file does not exist, STATPTR->st_mode is set to 0.
If STATPTR is null, we don't store into it.
- If QUICK is nonzero, we ask for y or n, not yes or no. */
+ If QUICK, ask for y or n, not yes or no. */
static void
barf_or_query_if_file_exists (Lisp_Object absname, const char *querystring,
- int interactive, struct stat *statptr, int quick)
+ bool interactive, struct stat *statptr,
+ bool quick)
{
- register Lisp_Object tem, encoded_filename;
+ Lisp_Object tem, encoded_filename;
struct stat statbuf;
struct gcpro gcpro1;
Lisp_Object handler;
struct gcpro gcpro1, gcpro2, gcpro3, gcpro4;
ptrdiff_t count = SPECPDL_INDEX ();
- int input_file_statable_p;
+ bool input_file_statable_p;
Lisp_Object encoded_file, encoded_newname;
#if HAVE_LIBSELINUX
security_context_t con;
- int fail, conlength = 0;
+ int conlength = 0;
#endif
encoded_file = encoded_newname = Qnil;
S_IREAD | S_IWRITE);
#else /* not MSDOS */
{
- int new_mask = 0666;
+ mode_t new_mask = 0666;
if (input_file_statable_p)
{
if (!NILP (preserve_uid_gid))
owner and group. */
if (input_file_statable_p)
{
- int mode_mask = 07777;
+ mode_t mode_mask = 07777;
if (!NILP (preserve_uid_gid))
{
/* Attempt to change owner and group. If that doesn't work
if (conlength > 0)
{
/* Set the modified context back to the file. */
- fail = fsetfilecon (ofd, con);
+ bool fail = fsetfilecon (ofd, con) != 0;
/* See http://debbugs.gnu.org/11245 for ENOTSUP. */
if (fail && errno != ENOTSUP)
report_file_error ("Doing fsetfilecon", Fcons (newname, Qnil));
return Qt;
}
-/* Delete file FILENAME, returning 1 if successful and 0 if failed.
+/* Delete file FILENAME.
This ignores `delete-by-moving-to-trash'. */
-int
+void
internal_delete_file (Lisp_Object filename)
{
- Lisp_Object tem;
-
- tem = internal_condition_case_2 (Fdelete_file, filename, Qnil,
- Qt, internal_delete_file_1);
- return NILP (tem);
+ internal_condition_case_2 (Fdelete_file, filename, Qnil,
+ Qt, internal_delete_file_1);
}
\f
DEFUN ("rename-file", Frename_file, Srename_file, 2, 3,
return file_name_absolute_p (SSDATA (filename)) ? Qt : Qnil;
}
\f
-/* Return nonzero if file FILENAME exists and can be executed. */
+/* Return true if file FILENAME exists and can be executed. */
-static int
+static bool
check_executable (char *filename)
{
#ifdef DOS_NT
#endif /* not DOS_NT */
}
-/* Return nonzero if file FILENAME exists and can be written. */
+/* Return true if file FILENAME exists and can be written. */
-static int
+static bool
check_writable (const char *filename)
{
#ifdef MSDOS
return (st.st_mode & S_IWRITE || S_ISDIR (st.st_mode));
#else /* not MSDOS */
#ifdef HAVE_EUIDACCESS
- int res = (euidaccess (filename, 2) >= 0);
+ bool res = (euidaccess (filename, 2) >= 0);
#ifdef CYGWIN
/* euidaccess may have returned failure because Cygwin couldn't
determine the file's UID or GID; if so, we return success. */
(Lisp_Object filename)
{
Lisp_Object handler;
- int tem;
+ bool tem;
struct gcpro gcpro1;
/* If the file name has special constructs in it,
Lisp_Object type = CAR_SAFE (CDR_SAFE (CDR_SAFE (context)));
Lisp_Object range = CAR_SAFE (CDR_SAFE (CDR_SAFE (CDR_SAFE (context))));
security_context_t con;
- int fail, conlength;
+ bool fail;
+ int conlength;
context_t parsed_con;
#endif
}
/* Set the modified context back to the file. */
- fail = lsetfilecon (SSDATA (encoded_absname),
- context_str (parsed_con));
+ fail = (lsetfilecon (SSDATA (encoded_absname),
+ context_str (parsed_con))
+ != 0);
/* See http://debbugs.gnu.org/11245 for ENOTSUP. */
if (fail && errno != ENOTSUP)
report_file_error ("Doing lsetfilecon", Fcons (absname, Qnil));
The value is an integer. */)
(void)
{
- int realmask;
+ mode_t realmask;
Lisp_Object value;
BLOCK_INPUT;
struct stat st;
int file_status;
EMACS_TIME mtime;
- register int fd;
+ int fd;
ptrdiff_t inserted = 0;
- int nochange = 0;
- register ptrdiff_t how_much;
+ bool nochange = 0;
+ ptrdiff_t how_much;
off_t beg_offset, end_offset;
- register int unprocessed;
+ int unprocessed;
ptrdiff_t count = SPECPDL_INDEX ();
struct gcpro gcpro1, gcpro2, gcpro3, gcpro4, gcpro5;
Lisp_Object handler, val, insval, orig_filename, old_undo;
Lisp_Object p;
ptrdiff_t total = 0;
- int not_regular = 0;
+ bool not_regular = 0;
int save_errno = 0;
char read_buf[READ_BUF_SIZE];
struct coding_system coding;
char buffer[1 << 14];
- int replace_handled = 0;
- int set_coding_system = 0;
+ bool replace_handled = 0;
+ bool set_coding_system = 0;
Lisp_Object coding_system;
- int read_quit = 0;
+ bool read_quit = 0;
Lisp_Object old_Vdeactivate_mark = Vdeactivate_mark;
- int we_locked_file = 0;
- int deferred_remove_unwind_protect = 0;
+ bool we_locked_file = 0;
+ bool deferred_remove_unwind_protect = 0;
if (current_buffer->base_buffer && ! NILP (visit))
error ("Cannot do file visiting in an indirect buffer");
ptrdiff_t same_at_end = ZV_BYTE;
ptrdiff_t overlap;
/* There is still a possibility we will find the need to do code
- conversion. If that happens, we set this variable to 1 to
+ conversion. If that happens, set this variable to
give up on handling REPLACE in the optimized way. */
- int giveup_match_end = 0;
+ bool giveup_match_end = 0;
if (beg_offset != 0)
{
If it is not set locally, we anyway have to convert EOL
format if the default value of `buffer-file-coding-system'
tells that it is not Unix-like (LF only) format. */
- int using_default_coding = 0;
- int force_raw_text = 0;
+ bool using_default_coding = 0;
+ bool force_raw_text = 0;
val = BVAR (current_buffer, buffer_file_coding_system);
if (NILP (val)
`write-region-post-annotation-function' at the end. */)
(Lisp_Object start, Lisp_Object end, Lisp_Object filename, Lisp_Object append, Lisp_Object visit, Lisp_Object lockname, Lisp_Object mustbenew)
{
- register int desc;
- int failure;
+ int desc;
+ bool ok;
int save_errno = 0;
const char *fn;
struct stat st;
Lisp_Object visit_file;
Lisp_Object annotations;
Lisp_Object encoded_filename;
- int visiting = (EQ (visit, Qt) || STRINGP (visit));
- int quietly = !NILP (visit);
+ bool visiting = (EQ (visit, Qt) || STRINGP (visit));
+ bool quietly = !NILP (visit);
struct gcpro gcpro1, gcpro2, gcpro3, gcpro4, gcpro5;
struct buffer *given_buffer;
struct coding_system coding;
UNGCPRO;
- failure = 0;
immediate_quit = 1;
if (STRINGP (start))
- {
- failure = 0 > a_write (desc, start, 0, SCHARS (start),
- &annotations, &coding);
- save_errno = errno;
- }
+ ok = a_write (desc, start, 0, SCHARS (start), &annotations, &coding);
else if (XINT (start) != XINT (end))
- {
- failure = 0 > a_write (desc, Qnil,
- XINT (start), XINT (end) - XINT (start),
- &annotations, &coding);
- save_errno = errno;
- }
+ ok = a_write (desc, Qnil, XINT (start), XINT (end) - XINT (start),
+ &annotations, &coding);
else
{
- /* If file was empty, still need to write the annotations */
+ /* If file was empty, still need to write the annotations. */
coding.mode |= CODING_MODE_LAST_BLOCK;
- failure = 0 > a_write (desc, Qnil, XINT (end), 0, &annotations, &coding);
- save_errno = errno;
+ ok = a_write (desc, Qnil, XINT (end), 0, &annotations, &coding);
}
+ save_errno = errno;
- if (CODING_REQUIRE_FLUSHING (&coding)
- && !(coding.mode & CODING_MODE_LAST_BLOCK)
- && ! failure)
+ if (ok && CODING_REQUIRE_FLUSHING (&coding)
+ && !(coding.mode & CODING_MODE_LAST_BLOCK))
{
/* We have to flush out a data. */
coding.mode |= CODING_MODE_LAST_BLOCK;
- failure = 0 > e_write (desc, Qnil, 1, 1, &coding);
+ ok = e_write (desc, Qnil, 1, 1, &coding);
save_errno = errno;
}
ignore EINVAL which happens when fsync is not supported on this
file. */
if (errno != EINTR && errno != EINVAL)
- failure = 1, save_errno = errno;
+ ok = 0, save_errno = errno;
}
#endif
/* NFS can report a write failure now. */
if (emacs_close (desc) < 0)
- failure = 1, save_errno = errno;
+ ok = 0, save_errno = errno;
stat (fn, &st);
current_buffer->modtime_size = st.st_size;
}
- if (failure)
+ if (! ok)
error ("IO error writing %s: %s", SDATA (filename),
emacs_strerror (save_errno));
Lisp_Object p, res;
struct gcpro gcpro1, gcpro2;
Lisp_Object original_buffer;
- int i, used_global = 0;
+ int i;
+ bool used_global = 0;
XSETBUFFER (original_buffer, current_buffer);
We modify *ANNOT by discarding elements as we use them up.
- The return value is negative in case of system call failure. */
+ Return true if successful. */
-static int
+static bool
a_write (int desc, Lisp_Object string, ptrdiff_t pos,
- register ptrdiff_t nchars, Lisp_Object *annot,
+ ptrdiff_t nchars, Lisp_Object *annot,
struct coding_system *coding)
{
Lisp_Object tem;
/* Output buffer text up to the next annotation's position. */
if (nextpos > pos)
{
- if (0 > e_write (desc, string, pos, nextpos, coding))
- return -1;
+ if (!e_write (desc, string, pos, nextpos, coding))
+ return 0;
pos = nextpos;
}
/* Output the annotation. */
tem = Fcdr (Fcar (*annot));
if (STRINGP (tem))
{
- if (0 > e_write (desc, tem, 0, SCHARS (tem), coding))
- return -1;
+ if (!e_write (desc, tem, 0, SCHARS (tem), coding))
+ return 0;
}
*annot = Fcdr (*annot);
}
- return 0;
+ return 1;
}
/* Write text in the range START and END into descriptor DESC,
encoding them with coding system CODING. If STRING is nil, START
and END are character positions of the current buffer, else they
- are indexes to the string STRING. */
+ are indexes to the string STRING. Return true if successful. */
-static int
+static bool
e_write (int desc, Lisp_Object string, ptrdiff_t start, ptrdiff_t end,
struct coding_system *coding)
{
coding->produced);
if (coding->produced)
- return -1;
+ return 0;
}
start += coding->consumed_char;
}
- return 0;
+ return 1;
}
\f
DEFUN ("verify-visited-file-modtime", Fverify_visited_file_modtime,
{
struct buffer *old = current_buffer, *b;
Lisp_Object tail, buf, hook;
- int auto_saved = 0;
+ bool auto_saved = 0;
int do_handled_files;
Lisp_Object oquit;
FILE *stream = NULL;
ptrdiff_t count = SPECPDL_INDEX ();
- int orig_minibuffer_auto_raise = minibuffer_auto_raise;
+ bool orig_minibuffer_auto_raise = minibuffer_auto_raise;
bool old_message_p = 0;
struct gcpro gcpro1, gcpro2;
if (!auto_saved && NILP (no_message))
message1 ("Auto-saving...");
internal_condition_case (auto_save_1, Qt, auto_save_error);
- auto_saved++;
+ auto_saved = 1;
BUF_AUTOSAVE_MODIFF (b) = BUF_MODIFF (b);
XSETFASTINT (BVAR (current_buffer, save_length), Z - BEG);
set_buffer_internal (old);
static Lisp_Object Qmd5, Qsha1, Qsha224, Qsha256, Qsha384, Qsha512;
-static int internal_equal (Lisp_Object , Lisp_Object, int, int);
+static bool internal_equal (Lisp_Object, Lisp_Object, int, bool);
\f
DEFUN ("identity", Fidentity, Sidentity, 1, 1, 0,
doc: /* Return the argument unchanged. */)
}
\f
static Lisp_Object concat (ptrdiff_t nargs, Lisp_Object *args,
- enum Lisp_Type target_type, int last_special);
+ enum Lisp_Type target_type, bool last_special);
/* ARGSUSED */
Lisp_Object
static Lisp_Object
concat (ptrdiff_t nargs, Lisp_Object *args,
- enum Lisp_Type target_type, int last_special)
+ enum Lisp_Type target_type, bool last_special)
{
Lisp_Object val;
- register Lisp_Object tail;
- register Lisp_Object this;
+ Lisp_Object tail;
+ Lisp_Object this;
ptrdiff_t toindex;
ptrdiff_t toindex_byte = 0;
- register EMACS_INT result_len;
- register EMACS_INT result_len_byte;
+ EMACS_INT result_len;
+ EMACS_INT result_len_byte;
ptrdiff_t argnum;
Lisp_Object last_tail;
Lisp_Object prev;
- int some_multibyte;
+ bool some_multibyte;
/* When we make a multibyte string, we can't copy text properties
while concatenating each string because the length of resulting
string can't be decided until we finish the whole concatenation.
/* DEPTH is current depth of recursion. Signal an error if it
gets too deep.
- PROPS, if non-nil, means compare string text properties too. */
+ PROPS means compare string text properties too. */
-static int
-internal_equal (register Lisp_Object o1, register Lisp_Object o2, int depth, int props)
+static bool
+internal_equal (Lisp_Object o1, Lisp_Object o2, int depth, bool props)
{
if (depth > 200)
error ("Stack overflow in equal");
The normal messages at start and end of loading FILENAME are suppressed. */)
(Lisp_Object feature, Lisp_Object filename, Lisp_Object noerror)
{
- register Lisp_Object tem;
+ Lisp_Object tem;
struct gcpro gcpro1, gcpro2;
- int from_file = load_in_progress;
+ bool from_file = load_in_progress;
CHECK_SYMBOL (feature);
base64 characters. */
-static ptrdiff_t base64_encode_1 (const char *, char *, ptrdiff_t, int, int);
-static ptrdiff_t base64_decode_1 (const char *, char *, ptrdiff_t, int,
+static ptrdiff_t base64_encode_1 (const char *, char *, ptrdiff_t, bool, bool);
+static ptrdiff_t base64_decode_1 (const char *, char *, ptrdiff_t, bool,
ptrdiff_t *);
DEFUN ("base64-encode-region", Fbase64_encode_region, Sbase64_encode_region,
static ptrdiff_t
base64_encode_1 (const char *from, char *to, ptrdiff_t length,
- int line_break, int multibyte)
+ bool line_break, bool multibyte)
{
int counter = 0;
ptrdiff_t i = 0;
ptrdiff_t old_pos = PT;
ptrdiff_t decoded_length;
ptrdiff_t inserted_chars;
- int multibyte = !NILP (BVAR (current_buffer, enable_multibyte_characters));
+ bool multibyte = !NILP (BVAR (current_buffer, enable_multibyte_characters));
USE_SAFE_ALLOCA;
validate_region (&beg, &end);
}
/* Base64-decode the data at FROM of LENGTH bytes into TO. If
- MULTIBYTE is nonzero, the decoded result should be in multibyte
+ MULTIBYTE, the decoded result should be in multibyte
form. If NCHARS_RETURN is not NULL, store the number of produced
characters in *NCHARS_RETURN. */
static ptrdiff_t
base64_decode_1 (const char *from, char *to, ptrdiff_t length,
- int multibyte, ptrdiff_t *nchars_return)
+ bool multibyte, ptrdiff_t *nchars_return)
{
ptrdiff_t i = 0; /* Used inside READ_QUADRUPLET_BYTE */
char *e = to;
static struct Lisp_Hash_Table *check_hash_table (Lisp_Object);
static ptrdiff_t get_key_arg (Lisp_Object, ptrdiff_t, Lisp_Object *, char *);
static void maybe_resize_hash_table (struct Lisp_Hash_Table *);
-static int sweep_weak_table (struct Lisp_Hash_Table *, int);
+static bool sweep_weak_table (struct Lisp_Hash_Table *, bool);
\f
***********************************************************************/
/* Compare KEY1 which has hash code HASH1 and KEY2 with hash code
- HASH2 in hash table H using `eql'. Value is non-zero if KEY1 and
+ HASH2 in hash table H using `eql'. Value is true if KEY1 and
KEY2 are the same. */
-static int
+static bool
cmpfn_eql (struct Lisp_Hash_Table *h,
Lisp_Object key1, EMACS_UINT hash1,
Lisp_Object key2, EMACS_UINT hash2)
/* Compare KEY1 which has hash code HASH1 and KEY2 with hash code
- HASH2 in hash table H using `equal'. Value is non-zero if KEY1 and
+ HASH2 in hash table H using `equal'. Value is true if KEY1 and
KEY2 are the same. */
-static int
+static bool
cmpfn_equal (struct Lisp_Hash_Table *h,
Lisp_Object key1, EMACS_UINT hash1,
Lisp_Object key2, EMACS_UINT hash2)
/* Compare KEY1 which has hash code HASH1, and KEY2 with hash code
- HASH2 in hash table H using H->user_cmp_function. Value is non-zero
+ HASH2 in hash table H using H->user_cmp_function. Value is true
if KEY1 and KEY2 are the same. */
-static int
+static bool
cmpfn_user_defined (struct Lisp_Hash_Table *h,
Lisp_Object key1, EMACS_UINT hash1,
Lisp_Object key2, EMACS_UINT hash2)
Weak Hash Tables
************************************************************************/
-/* Sweep weak hash table H. REMOVE_ENTRIES_P non-zero means remove
+/* Sweep weak hash table H. REMOVE_ENTRIES_P means remove
entries from the table that don't survive the current GC.
- REMOVE_ENTRIES_P zero means mark entries that are in use. Value is
- non-zero if anything was marked. */
+ !REMOVE_ENTRIES_P means mark entries that are in use. Value is
+ true if anything was marked. */
-static int
-sweep_weak_table (struct Lisp_Hash_Table *h, int remove_entries_p)
+static bool
+sweep_weak_table (struct Lisp_Hash_Table *h, bool remove_entries_p)
{
ptrdiff_t bucket, n;
- int marked;
+ bool marked;
n = ASIZE (h->index) & ~ARRAY_MARK_FLAG;
marked = 0;
ptrdiff_t i = XFASTINT (idx);
bool key_known_to_survive_p = survives_gc_p (HASH_KEY (h, i));
bool value_known_to_survive_p = survives_gc_p (HASH_VALUE (h, i));
- int remove_p;
+ bool remove_p;
if (EQ (h->weak, Qkey))
remove_p = !key_known_to_survive_p;
sweep_weak_hash_tables (void)
{
struct Lisp_Hash_Table *h, *used, *next;
- int marked;
+ bool marked;
/* Mark all keys and values that are in use. Keep on marking until
there is no more change. This is necessary for cases like
coding_system = Vcoding_system_for_write;
else
{
- int force_raw_text = 0;
+ bool force_raw_text = 0;
coding_system = BVAR (XBUFFER (object), buffer_file_coding_system);
if (NILP (coding_system)