.\" Copyright (c) 2009-2012 Marco Peereboom <marco@peereboom.us>
.\" Copyright (c) 2009 Darrin Chandler <dwchandler@stilyagin.com>
-.\" Copyright (c) 2011-2014 Reginald Kennedy <rk@rejii.com>
+.\" Copyright (c) 2011-2015 Reginald Kennedy <rk@rejii.com>
.\" Copyright (c) 2011-2012 Lawrence Teo <lteo@lteo.net>
.\" Copyright (c) 2011-2012 Tiago Cunha <tcunha@gmx.com>
.\" Copyright (c) 2012 David Hill <dhill@mindcry.org>
.It Cm S
Shift
.It Aq Cm Name
-Named key
-.It Cm M1
-Mouse button 1
-.It Cm M3
-Mouse button 3
+Named key or button
.El
.Pp
.Nm
is very simple in its use.
-Most of the actions are initiated via key or mouse bindings.
+Most of the actions are initiated via key or pointer bindings.
See the
.Sx BINDINGS
section below for defaults and customizations.
it then tries to open the global configuration file
.Pa /etc/spectrwm.conf .
.Pp
-The format of the file is \*(Ltkeyword\*(Gt = \*(Ltsetting\*(Gt.
+The format of the file is
+.Pp
+.Dl Ar keyword Li = Ar setting
+.Pp
For example:
.Pp
.Dl color_focus = red
.Xr XQueryColor 3
specification.
.Pp
-Comments begin with a #. When a literal '#' is desired in an option, then it
-must be escaped with a backslash. i.e. \e#
+Comments begin with a #.
+When a literal
+.Ql #
+is desired in an option, then it must be escaped with a backslash, i.e. \e#
.Pp
The file supports the following keywords:
.Bl -tag -width 2m
.It Ic autorun
Launch an application in a specified workspace at start-of-day.
-Defined in the format ws[<idx>]:application, e.g. ws[2]:xterm launches an
-xterm in workspace 2.
+Defined in the format
+.Li ws Ns Bo Ar idx Bc : Ns Ar application ,
+e.g. ws[2]:xterm launches an
+.Xr xterm 1
+in workspace 2.
+.Pp
+Note that workspace mapping is handled via
+.Pa libswmhack.so .
+When
+.Ic autorun
+spawns windows via a daemon, ensure the daemon is started
+with the correct
+.Pa LD_PRELOAD
+in its environment.
+.Pp
+For example, starting
+.Xr urxvtd 1
+via
+.Xr xinit 1 :
+.Bd -literal -offset indent
+LD_PRELOAD=/usr/lib/libswmhack.so.0.0 urxvtd -q -o -f
+.Ed
+.Pp
+Spawned programs automatically have
+.Pa LD_PRELOAD
+set when executed.
.It Ic bar_action
External script that populates additional information in the status bar,
such as battery life.
.Ar x .
.It Ic bar_enabled
Set default
-.Ar bar_toggle
+.Ic bar_toggle
state; default is 1.
.It Ic bar_enabled_ws Ns Bq Ar x
Set default
-.Ar bar_toggle_ws
+.Ic bar_toggle_ws
state on workspace
.Ar x ;
default is 1.
.It Ic bar_font
-Font used in the status bar. Either Xft or X Logical Font Description (XLFD)
-may be used to specify fonts. Fallback fonts may be specified by separating
-each font with a comma. If all entries are XLFD syntax, font set will be
-used. If at least one entry is Xft, Xft will be used. Note that if Xft is in
-use, only the first font that successfully loads will be used regardless of
-missing glyphs. The default is to use font set. Also note that dmenu does
-not support Xft fonts.
+Font used in the status bar.
+Either Xft or X Logical Font Description (XLFD) may be used to specify fonts.
+Fallback fonts may be specified by separating each font with a comma.
+If all entries are in XLFD syntax, font set will be used.
+If at least one entry is Xft, Xft will be used.
+Note that if Xft is in use, only the first font that successfully loads will
+be used regardless of missing glyphs.
+The default is to use font set.
+Also note that
+.Xr dmenu 1
+does not support Xft fonts.
.Pp
Xft examples:
.Bd -literal -offset indent
Color of the font in status bar in screen
.Ar x .
.It Ic bar_format
-Set the bar_format string and overrides
+Set the bar format string, overriding
.Ic clock_format
and all of the
.Ic enabled
.El
.Pp
All character sequences may limit its output to a specific length, for
-example +64A. Any characters that don't match the specification are copied
-as-is.
+example +64A.
+Any characters that don't match the specification are copied as-is.
.It Ic bar_justify
-Justify the status bar text. Possible values are
-.Pa left ,
-.Pa center ,
+Justify the status bar text.
+Possible values are
+.Ar left ,
+.Ar center ,
and
-.Pa right .
+.Ar right .
.Pp
-Note that if the output is not
-.Pa left
-justified, it may not be properly aligned in some circumstances, due to the
-white-spaces in the default static format.
+Note that if the output is not left justified, it may not be properly
+aligned in some circumstances, due to the white-spaces in the default
+static format.
See the
.Ic bar_format
option for more details.
.It Ic bind Ns Bq Ar x
-Bind key combo to action
+Bind key or button combo to action
.Ar x .
See the
.Sx BINDINGS
Set window border thickness in pixels.
Disable all borders by setting to 0.
.It Ic boundary_width
-Set region containment boundary width in pixels. This is how far a window
-must be dragged/resized beyond the region edge before it is allowed outside
-the region. This has no effect when manipulating the window with key
-bindings. Disable the window containment effect by setting to 0.
+Set region containment boundary width in pixels.
+This is how far a window must be dragged/resized (with the pointer)
+beyond the region edge before it is allowed outside the region.
+Disable the window containment effect by setting to 0.
.It Ic clock_enabled
Enable or disable displaying the clock in the status bar.
Disable by setting to 0
so a custom clock could be used in the
-.Pa bar_action
+.Ic bar_action
script.
.It Ic iconic_enabled
Display the number of iconic (minimized) windows in the status bar.
Enable by setting to 1.
.It Ic color_focus
-Border color of the currently focused window. Default is red.
+Border color of the currently focused window.
+Default is red.
.It Ic color_focus_maximized
-Border color of the currently focused, maximized window. Defaults to the
-value of color_focus.
+Border color of the currently focused, maximized window.
+Defaults to the value of
+.Ic color_focus .
.It Ic color_unfocus
Border color of unfocused windows, default is rgb:88/88/88.
.It Ic color_unfocus_maximized
-Border color of unfocused, maximized windows. Defaults to the value of
-color_unfocus.
+Border color of unfocused, maximized windows.
+Defaults to the value of
+.Ic color_unfocus .
.It Ic dialog_ratio
Some applications have dialogue windows that are too small to be useful.
This ratio is the screen size to what they will be resized.
.It Ic focus_close
Window to put focus when the focused window is closed.
Possible values are
-.Pa first ,
-.Pa next ,
-.Pa previous
+.Ar first ,
+.Ar next ,
+.Ar previous
(default) and
-.Pa last .
-.Pa next
+.Ar last .
+.Ar next
and
-.Pa previous
+.Ar previous
are relative to the window that is closed.
.It Ic focus_close_wrap
Whether to allow the focus to jump to the last window when the first window
-is closed or vice versa. Disable by setting to 0.
+is closed or vice versa.
+Disable by setting to 0.
.It Ic focus_default
-Window to put focus when no window has been focused. Possible values are
-.Pa first
+Window to put focus when no window has been focused.
+Possible values are
+.Ar first
and
-.Pa last
+.Ar last
(default).
.It Ic focus_mode
-Window focus behavior with respect to the mouse cursor. Possible values:
+Window focus behavior with respect to the pointer.
+Possible values:
.Pp
.Bl -tag -width "default" -offset indent -compact
-.It Cm default
+.It Ar default
Set window focus on border crossings caused by cursor motion and
window interaction.
-.It Cm follow
+.It Ar follow
Set window focus on all cursor border crossings, including workspace switches
and changes to layout.
-.It Cm manual
+.It Ar manual
Set window focus on window interaction only.
.El
+.It Ic maximize_hide_bar
+When set to 1,
+.Ic maximize_toggle
+will also hide/restore the bar visibility of the affected workspace.
+Defaults to 0.
.It Ic java_workaround
Workaround a Java GUI rendering issue on non-reparenting window managers by
-impersonating LG3D window manager, written by Sun. Default is 1.
+impersonating the LG3D window manager, written by Sun.
+Default is 1.
.It Ic keyboard_mapping
-Clear all key bindings and load new key bindings from the specified file.
+Clear all key bindings (not button bindings) and load new bindings from the
+specified file.
This allows you to load pre-defined key bindings for your keyboard layout.
See the
.Sx KEYBOARD MAPPING FILES
section below for a list of keyboard mapping files that have been provided
for several keyboard layouts.
.It Ic layout
-Select layout to use at start-of-day. Defined in the format
-ws[idx]:master_grow:master_add:stack_inc:layout:always_raise:stack_mode, e.g.
-ws[2]:-4:0:1:0:horizontal sets worskspace 2 to the horizontal stack mode and
-shrinks the master area by 4 ticks and adds one window to the stack, while
-maintaining default floating window behavior.
-Possible stack_mode values are
-.Pa vertical ,
-.Pa vertical_flip ,
-.Pa horizontal ,
-.Pa horizontal_flip
+Select layout to use at start-of-day.
+Defined in the format
+.Li ws Ns Bo Ar idx Bc : Ns Ar master_grow : Ns Ar master_add : Ns Ar stack_inc : Ns Ar always_raise : Ns Ar stack_mode ,
+e.g. ws[2]:-4:0:1:0:horizontal sets worskspace 2 to the horizontal stack
+mode, shrinks the master area by 4 ticks and adds one window to the
+stack, while maintaining default floating window behavior.
+Possible
+.Ar stack_mode
+values are
+.Ar vertical ,
+.Ar vertical_flip ,
+.Ar horizontal ,
+.Ar horizontal_flip
and
-.Pa fullscreen .
+.Ar fullscreen .
.Pp
See
-.Pa master_grow ,
-.Pa master_shrink ,
-.Pa master_add ,
-.Pa master_del ,
-.Pa stack_inc ,
-.Pa stack_dec ,
+.Ic master_grow ,
+.Ic master_shrink ,
+.Ic master_add ,
+.Ic master_del ,
+.Ic stack_inc ,
+.Ic stack_dec ,
+.Ic stack_balance ,
and
-.Pa always_raise
+.Ic always_raise
for more information.
-Note that the stacking options are complicated and have side-effects. One
-should familiarize oneself with these commands before experimenting with the
-.Pa layout
+Note that the stacking options are complicated and have side-effects.
+One should familiarize oneself with these commands before experimenting
+with the
+.Ic layout
option.
.Pp
This setting is not retained at restart.
Mod1 is generally the ALT key and Mod4 is the windows key on a PC.
.It Ic name
Set the name of a workspace at start-of-day.
-Defined in the format ws[<idx>]:<name>, e.g. ws[1]:Console sets the name of
-workspace 1 to
+Defined in the format
+.Li ws Ns Bo Ar idx Bc : Ns Ar name ,
+e.g. ws[1]:Console sets the name of workspace 1 to
.Dq Console .
.It Ic program Ns Bq Ar p
Define new action to spawn a program
See the
.Sx PROGRAMS
section below.
-.It Ic quirk Ns Bq Ar c:i:n
+.It Ic quirk Ns Bq Ar c Ns Li : Ns Ar i Ns Li : Ns Ar n
Add "quirk" for windows with class
.Ar c ,
instance
.It Ic region
Allocates a custom region, removing any autodetected regions which occupy the
same space on the screen.
-Defined in the format screen[<idx>]:WIDTHxHEIGHT+X+Y,
-e.g.\& screen[1]:800x1200+0+0.
+Defined in the format
+.Li screen Ns Bo Ar idx Ns Bc : Ns Ar width Ns x Ns Ar height Ns + Ns Ar x Ns + Ns Ar y ,
+e.g. screen[1]:800x1200+0+0.
.Pp
To make a region span multiple monitors, create a region big enough to cover
them all, e.g. screen[1]:2048x768+0+0 makes the region span two monitors with
.It Ic spawn_position
Position in stack to place newly spawned windows.
Possible values are
-.Pa first ,
-.Pa next ,
-.Pa previous
+.Ar first ,
+.Ar next ,
+.Ar previous
and
-.Pa last
+.Ar last
(default).
-.Pa next
+.Ar next
and
-.Pa previous
+.Ar previous
are relative to the focused window.
.It Ic stack_enabled
Enable or disable displaying the current stacking algorithm in the status
.Xr xterm 1
binary without the setgid bit set.
.It Ic tile_gap
-Pixel width of empty space between tiled windows. Negative values cause overlap.
-Set this to the opposite of border_width to collapse the border between tiles.
+Pixel width of empty space between tiled windows.
+Negative values cause overlap.
+Set this to the opposite of
+.Ic border_width
+to collapse the border between tiles.
Disable by setting to 0.
+.It Ic urgent_collapse
+Minimizes the space consumed by the urgency hint indicator by removing the
+placeholders for non-urgent workspaces, the trailing space when there are
+urgent windows and the default leading space.
+Enable by setting to 1.
.It Ic urgent_enabled
Enable or disable the urgency hint indicator in the status bar.
Note that many terminal emulators require an explicit setting for the bell
-character to trigger urgency on the window. In xterm, for example, one needs to
-add the following line to
+character to trigger urgency on the window.
+In
+.Xr xterm 1 ,
+for example, one needs to add the following line to
.Pa .Xdefaults :
.Bd -literal -offset indent
xterm.bellIsUrgent: true
count in the status bar.
Enable by setting to 1.
See
-.Pa master_add ,
-.Pa master_del ,
-.Pa stack_inc
+.Ar master_add ,
+.Ar master_del ,
+.Ar stack_inc
and
-.Pa stack_dec
+.Ar stack_dec
for more information.
+.It Ic workspace_clamp
+Prevents workspaces from being swapped when attempting to switch to a workspace
+that is mapped to another region.
+Use
+.Ar warp_focus
+if you want to focus on the region containing the workspace and
+.Ar warp_pointer
+if you want to also send the pointer.
+Enable by setting to 1.
.It Ic window_class_enabled
Enable or disable displaying the window class name (from WM_CLASS) in the
-status bar. Enable by setting to 1.
+status bar.
+Enable by setting to 1.
.It Ic window_instance_enabled
Enable or disable displaying the window instance name (from WM_CLASS) in the
-status bar. Enable by setting to 1.
+status bar.
+Enable by setting to 1.
.It Ic window_name_enabled
Enable or disable displaying the window display name (from _NET_WM_NAME/WM_NAME)
-in the status bar. Enable by setting to 1.
+in the status bar.
+Enable by setting to 1.
.Pp
To prevent excessively large window names from pushing the remaining text off
the bar, it's limited to 64 characters, by default.
See the
.Ic bar_format
option for more details.
+.It Ic warp_focus
+Focus on the target window/workspace/region when clamped.
+For example, when attempting to switch to a workspace that is mapped on another
+region and
+.Ar workspace_clamp
+is enabled, focus on the region with the target workspace.
+Enable by setting to 1.
+.It Ic warp_pointer
+Centers the pointer on the focused window when using bindings to
+change focus, switch workspaces, change regions, etc.
+Enable by setting to 1.
.It Ic workspace_limit
-Set the total number of workspaces available. Minimum is 1, maximum is 22,
-default is 10.
+Set the total number of workspaces available.
+Minimum is 1, maximum is 22, default is 10.
.El
.Sh PROGRAMS
.Nm
.Pp
Custom programs in the configuration file are specified as follows:
.Pp
-.Dl program[<action>] = <progpath> [<arg> [... <arg>]]
+.Dl program Ns Bo Ar action Bc = Ar progpath Op Ar arg Op Ar arg ...
.Pp
-.Aq action
+.Ar action
is any identifier that does not conflict with a built-in action or keyword,
-.Aq progpath
+.Ar progpath
is the desired program, and
-.Aq arg
+.Ar arg
is zero or more arguments to the program.
.Pp
-Remember that when using # in your program call, it must be escaped with a
-backslash. i.e. \e#
+Remember that when using
+.Ql #
+in your program call, it must be escaped with a backslash, i.e. \e#
.Pp
The following argument variables will be substituted for values at the time the program
is spawned:
.It Cm $color_focus
.It Cm $color_unfocus
.It Cm $dmenu_bottom
--b if bar_at_bottom is enabled.
+\-b if
+.Ic bar_at_bottom
+is enabled.
.It Cm $region_index
.It Cm $workspace_index
.El
Example:
.Bd -literal -offset indent
program[ff] = /usr/local/bin/firefox http://spectrwm.org/
-bind[ff] = Mod+Shift+b # Now M-S-b launches firefox
+bind[ff] = MOD+Shift+b # Now M-S-b launches firefox
.Ed
.Pp
To cancel the previous, unbind it:
.Bd -literal -offset indent
-bind[] = Mod+Shift+b
+bind[] = MOD+Shift+b
.Ed
.Pp
Default programs:
Note that optional default programs will not be validated unless overridden.
If a default program fails validation, you can resolve the exception
by installing the program, modifying the program call or disabling the program
-by freeing the respective key binding.
+by freeing the respective binding.
.Pp
For example, to override
.Ic lock :
.Bd -literal -offset indent
-program[lock] = xscreensaver-command --lock
+program[lock] = xscreensaver\-command \-lock
.Ed
.Pp
To unbind
.Ed
.Sh BINDINGS
.Nm
-provides many functions (or actions) accessed via key or mouse bindings.
-.Pp
-The current mouse bindings are described below:
-.Pp
-.Bl -tag -width "M-j, M-<TAB>XXX" -offset indent -compact
-.It Cm M1
-Focus window
-.It Cm M-M1
-Move window
-.It Cm M-M3
-Resize window
-.It Cm M-S-M3
-Resize window while maintaining it centered
-.El
+provides many functions (or actions) accessed via key or pointer bindings.
.Pp
-The default key bindings are described below:
+The default bindings are listed below:
.Pp
.Bl -tag -width "M-j, M-<TAB>XXXXXX" -offset indent -compact
+.It Cm Ns Aq Cm Button1
+focus
+.It Cm M- Ns Aq Cm Button1
+move
+.It Cm M- Ns Aq Cm Button3
+resize
+.It Cm M-S- Ns Aq Cm Button3
+resize_centered
.It Cm M-S- Ns Aq Cm Return
term
.It Cm M-p
restart
.It Cm M- Ns Aq Cm Space
cycle_layout
-.It Cm M-S- Ns Aq Cm \e
+.It Cm M-S-\e
flip_layout
.It Cm M-S- Ns Aq Cm Space
stack_reset
+.It Cm Aq Ar unbound
+stack_balance
.It Cm M-h
master_shrink
.It Cm M-l
.Pf rg_ Aq Ar 1-9
.It Cm M-S- Ns Aq Ar Keypad 1-9
.Pf mvrg_ Aq Ar 1-9
+.It Cm Aq Ar unbound
+mvrg_next
+.It Cm Aq Ar unbound
+mvrg_prev
.It Cm M- Ns Aq Cm Right
ws_next
.It Cm M- Ns Aq Cm Left
.It Cm M- Ns Aq Cm Down
ws_prev_all
.It Cm M-a
-ws_next_move
-.It Cm M-S- Ns Aq Cm Left
+ws_prior
+.It Cm M-S- Ns Aq Cm Down
ws_prev_move
.It Cm M-S- Ns Aq Cm Up
-ws_prior
+ws_next_move
.It Cm M-S- Ns Aq Cm Right
rg_next
.It Cm M-S- Ns Aq Cm Left
rg_prev
+.It Cm Aq Ar unbound
+rg_move_next
+.It Cm Aq Ar unbound
+rg_move_prev
.It Cm M-s
screenshot_all
.It Cm M-S-s
uniconify
.It Cm M-e
maximize_toggle
+.It Cm M-S-e
+fullscreen_toggle
+.It Cm M-r
+raise
.It Cm M-S-r
always_raise
.It Cm M-v
The action names and descriptions are listed below:
.Pp
.Bl -tag -width "M-j, M-<TAB>XXXX" -offset indent -compact
+.It Cm focus
+Focus window/region under pointer.
+.It Cm move
+Move window with pointer while binding is pressed.
+.It Cm resize
+Resize window with pointer while binding is pressed.
+.It Cm resize_centered
+Same as
+.Ic resize
+but keep window centered.
.It Cm term
Spawn a new terminal
(see
Swap the master and stacking areas.
.It Cm stack_reset
Reset layout.
+.It Cm stack_balance
+Balance master/stacking area.
.It Cm master_shrink
Shrink master area.
.It Cm master_grow
.It Cm focus_main
Focus on main window in workspace.
.It Cm focus_urgent
-Focus on next window with the urgency hint flag set. The workspace is switched if needed.
+Focus on next window with the urgency hint flag set.
+The workspace is switched if needed.
.It Cm swap_next
Swap with next window in workspace.
.It Cm swap_prev
.Ar n ,
where
.Ar n
-is 1 through workspace_limit.
+is 1 through
+.Ic workspace_limit .
.It Cm mvws_ Ns Ar n
Move current window to workspace
.Ar n ,
where
.Ar n
-is 1 through workspace_limit.
+is 1 through
+.Ic workspace_limit .
.It Cm rg_ Ns Ar n
Focus on region
.Ar n ,
where
.Ar n
is 1 through 9.
+.It Cm mvrg_next
+Move current window to workspace in next region.
+.It Cm mvrg_prev
+Move current window to workspace in previous region.
.It Cm ws_next
Switch to next workspace with a window in it.
.It Cm ws_prev
Switch to next region.
.It Cm rg_prev
Switch to previous region.
+.It Cm rg_move_next
+Switch region to next screen.
+.It Cm rg_move_prev
+Switch region to previous screen.
.It Cm screenshot_all
Take screenshot of entire screen (if enabled)
(see
.It Cm iconify
Minimize (unmap) currently focused window.
.It Cm uniconify
-Restore (map) window returned by dmenu selection.
+Restore (map) window returned by
+.Xr dmenu 1
+selection.
.It Cm maximize_toggle
Toggle maximization of focused window.
+.It Cm fullscreen_toggle
+Toggle fullscreen state of focused window.
+.It Cm raise
+Raise the current window.
.It Cm always_raise
When set tiled windows are allowed to obscure floating windows.
.It Cm button2
-Fake a middle mouse button click (mouse button 2).
+Fake a middle mouse button click (Button2).
.It Cm width_shrink
Shrink the width of a floating window.
.It Cm width_grow
.Pp
Custom bindings in the configuration file are specified as follows:
.Pp
-.Dl bind[<action>] = <keys>
+.Dl bind Ns Bo Ar action Bc = Ar combo
.Pp
-.Aq action
+.Ar action
is one of the actions listed above (or empty to unbind) and
-.Aq keys
-is in the form of zero or more modifier keys
-(MOD, Mod1, Shift, etc.) and one or more normal keys
-(b, space, etc.), separated by "+".
+.Ar combo
+is in the form of zero or more modifier keys and/or special arguments
+(Mod1, Shift, MOD, etc.) and a normal key (b, Space, etc.)
+or a button (Button1 .. Button255), separated by
+.Ql + .
+Multiple key/button combinations may be bound to the same action.
+.Pp
+Special arguments:
+.Bl -tag -width "anymodxxxx" -offset indent -compact
+.It Cm MOD
+Substituted for the currently defined
+.Ic modkey .
+.It Cm ANYMOD
+Select all modifier combinations not handled by another binding.
+.It Cm REPLAY
+Reprocess binding press/release events for other programs to handle. Unavailable for
+.Ic move ,
+.Ic resize
+and
+.Ic resize_centered .
+.El
.Pp
-Example:
+.Cm MOD
+example:
.Bd -literal -offset indent
bind[reset] = Mod4+q # bind Windows-key + q to reset
bind[] = Mod1+q # unbind Alt + q
+bind[move] = MOD+Button3 # Bind move to M-Button3
+bind[] = MOD+Button1 # Unbind default move binding.
.Ed
.Pp
-To use the currently defined
-.Ic modkey ,
-specify MOD as the modifier key.
+.Cm ANYMOD
+example:
+.Bd -literal -offset indent
+bind[focus] = ANYMOD+Button3
+bind[move] = MOD+Button3
+.Ed
+.Pp
+In the above example,
+.Cm M- Ns Aq Cm Button3
+initiates
+.Ic move
+and
+.Cm Aq Cm Button3
+pressed with any other combination of modifiers
+sets focus to the window/region under the pointer.
.Pp
-Multiple key combinations may be bound to the same action.
+.Cm REPLAY
+example:
+.Bd -literal -offset indent
+bind[focus] = REPLAY+Button3
+.Ed
.Pp
-To bind non-latin characters such as å or π you must enter the xkb
-character name instead of the character itself. Run xev, focus the window
-and press the specific key and in the terminal output read the symbol name.
-In the fallowing example for å:
+In the above example, when
+.Cm Aq Cm Button3
+is pressed without any modifier(s), focus is set to the window under the
+pointer and the button press is passed to the window.
+.Pp
+To bind non-latin characters such as \[oa] or \[*p] you must enter the xkb
+character name instead of the character itself.
+Run
+.Xr xev 1 ,
+focus the window and press the specific key and in the terminal output read
+the symbol name.
+In the following example for \[oa]:
.Bd -literal -offset indent
KeyPress event, serial 41, synthetic NO, window 0x2600001,
root 0x15a, subw 0x0, time 106213808, (11,5), root:(359,823),
state 0x0, keycode 24 (keysym 0xe5, aring), same_screen YES,
- XLookupString gives 2 bytes: (c3 a5) "å"
- XmbLookupString gives 2 bytes: (c3 a5) "å"
+ XLookupString gives 2 bytes: (c3 a5) "\[oa]"
+ XmbLookupString gives 2 bytes: (c3 a5) "\[oa]"
XFilterEvent returns: False
.Ed
.Pp
-The xkb name is aring. In other words, in .spectrwm.conf add:
+The xkb name is aring.
+In other words, in
+.Pa spectrwm.conf
+add:
.Bd -literal -offset indent
bind[program] = MOD+aring
.Ed
Keyboard mapping files for several keyboard layouts are listed
below.
These files can be used with the
-.Pa keyboard_mapping
+.Ic keyboard_mapping
setting to load pre-defined key bindings for the specified
keyboard layout.
.Pp
The quirks themselves are described below:
.Pp
.Bl -tag -width "XTERM_FONTADJ<TAB>XXX" -offset indent -compact
-.It FLOAT
-This window should not be tiled, but allowed to float freely.
-.It TRANSSZ
-Adjusts size on transient windows that are too small using dialog_ratio
-(see
-.Sx CONFIGURATION FILES ) .
.It ANYWHERE
Allow window to position itself, uncentered.
-.It XTERM_FONTADJ
-Adjust xterm fonts when resizing.
-.It FULLSCREEN
-Remove border to allow window to use full region size.
+.It FLOAT
+This window should not be tiled, but allowed to float freely.
+.It FOCUSONMAP_SINGLE
+When the window first appears on the screen, change focus to the window
+if there are no other windows on the workspace with the same WM_CLASS
+class/instance value.
+Has no effect when
+.Ic focus_mode
+is set to
+.Ar follow .
.It FOCUSPREV
On exit force focus on previously focused application not previous
application in the stack.
+.It FULLSCREEN
+Remove border to allow window to use full region size.
+.It IGNOREPID
+Ignore the PID when determining the initial workspace for a new window.
+Especially useful for terminal windows that share a process.
+.It IGNORESPAWNWS
+Ignore the spawn workspace when determining the initial workspace for a
+new window.
+.It MINIMALBORDER
+Remove border when window is unfocused and floating.
+.It NOFOCUSCYCLE
+Remove from normal focus cycle (focus_prev or focus_next). The window can
+still be focused using search_win.
.It NOFOCUSONMAP
Don't change focus to the window when it first appears on the screen.
Has no effect when
.Ic focus_mode
-is set to follow.
-.It FOCUSONMAP_SINGLE
-When the window first appears on the screen, change focus to the window
-if there are no other windows on the workspace with the same WM_CLASS
-class/instance value. Has no effect when
-.Ic focus_mode
-is set to follow.
+is set to
+.Ar follow .
.It OBEYAPPFOCUSREQ
When an application requests focus on the window via a _NET_ACTIVE_WINDOW
client message (source indication of 1), comply with the request.
Note that a source indication of 0 (unspecified) or 2 (pager) are always
obeyed.
+.It TRANSSZ
+Adjusts size on transient windows that are too small using
+.Ic dialog_ratio
+(see
+.Sx CONFIGURATION FILES ) .
+.It WS Ns Bq Ar n
+Force a new window to appear on workspace
+.Ar n .
+.It XTERM_FONTADJ
+Adjust
+.Xr xterm 1
+fonts when resizing.
.El
.Pp
Custom quirks in the configuration file are specified as follows:
.Pp
-.Dl quirk[<class>[:<instance>[:<name>]]] = <quirk> [ + <quirk> ... ]
+.Dl quirk Ns Bo Ar class Ns Bo : Ns Ar instance Ns Bo : Ns Ar name Bc Bc Bc = Ar quirk Op + Ar quirk ...
.Pp
-.Aq class ,
-.Aq instance
+.Ar class ,
+.Ar instance
(optional) and
-.Aq name
+.Ar name
(optional) are patterns used to determine which window(s) the quirk(s) apply
-and
-.Aq quirk
+to and
+.Ar quirk
is one of the quirks from the list above.
.Pp
Note that patterns are interpreted as POSIX Extended Regular Expressions.
.Ed
.Pp
You can obtain
-.Aq class ,
-.Aq instance
+.Ar class ,
+.Ar instance
and
-.Aq name
+.Ar name
by running
.Xr xprop 1
and then clicking on the desired window.
In the following example the main window of Firefox was clicked:
.Bd -literal -offset indent
-$ xprop | grep -E "^(WM_CLASS|_NET_WM_NAME|WM_NAME)"
+$ xprop | grep \-E "^(WM_CLASS|_NET_WM_NAME|WM_NAME)"
WM_CLASS(STRING) = "Navigator", "Firefox"
WM_NAME(STRING) = "spectrwm - ConformalOpenSource"
_NET_WM_NAME(UTF8_STRING) = "spectrwm - ConformalOpenSource"
.Bd -literal -offset indent
WM_CLASS(STRING) = "<instance>", "<class>"
.Ed
+.Pp
In the example above the quirk entry would be:
.Bd -literal -offset indent
quirk[Firefox:Navigator] = FLOAT
For example, the following toggles the floating state of
a window using
.Xr wmctrl 1
-to send the message (assuming 0x4a0000b is the id of the window floated
-or un-floated):
+to send the message (assuming 0x4a0000b is the id of the window to be
+floated or un-floated):
.Bd -literal -offset indent
$ wmctrl \-i \-r 0x4a0000b \-b toggle,_NET_WM_STATE_ABOVE
.Ed