Mitchell Fang [Wed, 22 May 2013 08:23:27 +0000 (11:23 +0300)]
thread-mainloop: Fix bug in example code
Checking the operation state caused a deadlock, because the state
won't change before my_drain_callback() returns, and it doesn't
return before my_drain_stream_func() calls
pa_threaded_mainloop_accept().
Mikel Astiz [Fri, 10 May 2013 08:30:47 +0000 (10:30 +0200)]
bluetooth: Support transport auto-release
With BlueZ 5, if the remote device suspends the audio, the transport
state will change to "idle" and the endpoint is not required to release
the transport, since this could introduce race conditions. Therefore,
ignore the call to pa_bluetooth_transport_release() if the transport is
not acquired any more.
Mikel Astiz [Fri, 10 May 2013 08:30:46 +0000 (10:30 +0200)]
bluetooth: Update to new BlueZ 5 transport acquire/release API
The new D-Bus API doesn't support access rights, which weren't used by
PulseAudio anyway, but it does solve a race condition: now optional
acquires can be implemented by bluetooth-util atomically using the D-Bus
TryAcquire() method.
Mikel Astiz [Fri, 10 May 2013 08:30:45 +0000 (10:30 +0200)]
bluetooth: Support media transport's State property
BlueZ 5 exposes a 'State' property in the media transport interface.
With regard to PA, this replaces the profile-specific interfaces, since
they were being used to know if the audio was streaming or not.
Mikel Astiz [Fri, 10 May 2013 08:30:44 +0000 (10:30 +0200)]
bluetooth: Parse media transport's properties
Add the code to parse the properties of the media transport object when
a PropertiesChanged signal is received.
Note that the transport might have an owner other than BlueZ, and thus
the property changes would be emitted from arbitrary senders. For
performance reasons, the installed match considers the interface name
where the property has changed.
It could be possible to install and remove the D-Bus matches dynamically
when a new owner is registered/unregistered, but filtering based on the
interface name seems good enough already.
Mikel Astiz [Fri, 10 May 2013 08:30:42 +0000 (10:30 +0200)]
bluetooth: Support ObjectManager interface add/remove
Install matches for signals ObjectManager.InterfacesAdded and
ObjectManager.InterfacesRemoved, and process the devices that are
registered and unregistered dynamically.
Nikolay Amiantov [Sun, 5 May 2013 11:22:53 +0000 (15:22 +0400)]
pactl: Flush stdout buffer when printing subscribe events.
"pactl subscribe" is running continuously, and without flushing its output is
not usable for "process-on-arrival" per-line tasks, such as grepping. This
patch should fix this. For example, now:
pactl subscribe | grep 'server'
should print only server events as they arrive.
Mikel Astiz [Mon, 29 Apr 2013 16:27:59 +0000 (18:27 +0200)]
bluetooth: Parse the tree returned by ObjectManager
Parse the result of ObjectManager.GetManagedObjects(), which includes
all objects registered, their interfaces and the corresponding
properties per interface.
Any code that runs inside the init() callback sees an invalid module
index. Sometimes init() does things that cause hooks to be fired. This
means that any code that uses hooks may see an invalid module index.
Fix this by assigning the module index before init() is called.
There are no known issues in the upstream code base where an invalid
module index would be used, but an out-of-tree module
(module-murphy-ivi) had a problem with this.
João Paulo Rechi Vita [Sat, 27 Apr 2013 00:24:52 +0000 (21:24 -0300)]
bluetooth: Remove the 'bluez.name' property
The 'Name' property of the Device interface became optional in BlueZ 5
and may not be present anymore (that happens when testing against the
PTS 4.7.0), so it's better not to expose it to clients so they don't
rely on its existence.
Peter Meerwald [Tue, 9 Apr 2013 14:10:16 +0000 (16:10 +0200)]
fdsem: Remember pa_write() type in pa_fdsem_post()
pa_write() knows two types of operation:
calling send() and calling write()
there is a flag (a pointer to an int) passed to pa_write()
which can remember which write type was successful
if the pointer is NULL or the int is 0, send() is tried first,
with a fallback to write() if send() resulted in ENOTSOCK
pa_fdsem_post() calls pa_write() with a NULL pointer;
unfortunately (at least with HAVE_SYS_EVENTFD_H #define'd) send()
always fails here and write() is called -- causing an extra syscall
quite frequently
Tanu Kaskinen [Wed, 13 Jun 2012 09:45:16 +0000 (12:45 +0300)]
pasuspender: Resume before exiting in case of SIGINT or fork() failure.
Pressing Ctrl-C in a terminal while pasuspender is running
causes the sinks and sources to stay suspended after
pasuspender has exited, which is very annoying. This patch
fixes that problem, and also a similar problem with fork()
failures.
Tanu Kaskinen [Wed, 13 Jun 2012 08:15:03 +0000 (11:15 +0300)]
core-util: Don't accept random words in pa_parse_boolean()
The old code accepted any word that started with "y", "Y",
"n", "N", "t", "T", "f" or "F". Fix this by having
a whitelist of full strings instead of checking just the
first letter.
Peter Meerwald [Thu, 28 Mar 2013 13:46:48 +0000 (14:46 +0100)]
build: make ARM NEON check in configure.ac more strict
the check for NEON so far only checked if -mfpu=neon is understood by the compiler,
however, this is not enough:
(i) #include <arm_neon.h> should be checked
(ii) -mfpu=neon must be passed before CFLAGS because eventually the per-library CFLAGS
for NEON code in src/Makefile.am are passed to the compiler before the global CFLAGS
in case the build environment passes CFLAGS to configure and we try to set conflicting
CFLAGS option, the former take precedence; CFLAGS cannot be overridden
this does not fix
http://lists.freedesktop.org/archives/pulseaudio-discuss/2012-December/015570.html
but at least makes the build fail in configure (and not while compiling stuff)
and gives better diagnostics
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
João Paulo Rechi Vita [Wed, 27 Mar 2013 13:45:33 +0000 (10:45 -0300)]
bluetooth: Improve code and log readability
This commit makes the code cleaner, avoiding unnecessary line breaks. It
also changes the debug message elements order, to make it look more
natural ("path, interface, member" instead of "interface, path,
member").
Tanu Kaskinen [Fri, 29 Jun 2012 15:04:58 +0000 (18:04 +0300)]
alsa-mixer: Remove the "name" option from the "General" section of path configuration files
This means that the path names will always correspond to the
path configuration file names, so they will automatically be
unique (in the scope of one card).
Tanu Kaskinen [Fri, 29 Jun 2012 15:04:57 +0000 (18:04 +0300)]
alsa-mixer: Introduce "description-key" option for paths
Previously the path description was looked up based on the
path name only. Since there can be multiple paths that use
the same description, it had to be possible to have multiple
paths with the same name.
Having the same name with multiple paths makes identifying
the paths more complex than necessary, so the plan is to
make it impossible to have paths with the same name. This
patch prepares for that by retaining the possibility to
still have the same description with multiple paths. Instead
of the path name, the path description is looked up by using
the "path description key" if it is set (path name is still
used as a fallback lookup key).
Tanu Kaskinen [Fri, 29 Jun 2012 15:04:56 +0000 (18:04 +0300)]
switch-on-port-available: Prepare for dual-direction ports going away
As an extra, I broke try_to_switch_profile() into smaller
functions, because the two levels of loops with continue
statements inside both were a bit hard to follow.
Vadim Troshchinskiy [Wed, 29 May 2013 10:58:36 +0000 (13:58 +0300)]
osx: Fix latency querying
get_latency_us() used an uninitialized variable, and an incorrect
scope for some of the AudioObjectGetPropertyData() calls. As a result,
audio would randomly not work at all.
Mikel Astiz [Mon, 20 May 2013 09:48:33 +0000 (11:48 +0200)]
bluetooth: Fix missing port->profile association
Commit 17b3cb954b179392e80b0a46d8f2ba4693aec386 merged Bluetooth ports
into two ports (one for input, one for output) but the association
between ports and profiles was lost.
David Henningsson [Thu, 16 May 2013 08:56:21 +0000 (10:56 +0200)]
alsa-mixer: Add "Line Out Jack" to analog-output.conf
A stationary computer usually has headphone jack(s) and line out jacks.
In some cases analog-output.conf will be a subset of
analog-output-headphones.conf, causing line outs to be unusable (because
headphones are unplugged).
This late in the cycle, this was the safest way I could think of to try
to fix this for a particular computer. In later versions of PulseAudio
we could consider making a dedicated line out path instead, and have
proper jack detection there.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
alsa-mixer: Don't use the mono path in the analog-stereo mapping.
As far as I can see, having a mono path in a stereo mapping doesn't
make any sense. It also causes breakage: if the Master Mono mixer
element has two volume channels, the analog-output path gets removed
due to being a subset of analog-output-mono, and that in turn causes
the Master element getting muted. Users generally don't like that.
Peter Meerwald [Wed, 17 Apr 2013 13:07:31 +0000 (15:07 +0200)]
doc: Fix description how boolean values can be specified
"any word starting with the letters" parts; this does not hold
any longer with commit 0e29e7365907ffbe90df768a4dea277dba40d495
core-util: Don't accept random words in pa_parse_boolean()
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
David Henningsson [Tue, 16 Apr 2013 04:40:40 +0000 (06:40 +0200)]
alsa-mixer: Switch to Headphone when Headphone mic jack is plugged in
When a "Headphone Mic" jack becomes available, we do not know if
a headphone or a mic has been plugged in. Therefore, setting both
paths to "unknown" is, in theory, the correct thing to do.
However, in practice, people are more likely to plug in a headphone
rather than a mic. Therefore, allow autoswitch to the headphone port
when the jack is plugged in.
A more advanced implementation would consider what was plugged in last
time depending on what port was selected on the input side at that
time, and set availability accordingly. However, such an implementation
will have to wait (probably at least until we have our fancy routing
system implementation).
David Henningsson [Tue, 16 Apr 2013 12:56:35 +0000 (14:56 +0200)]
alsa: Fix ELD access warning on shutdown
The hdmi_eld_changed callback is called by alsa-lib at shutdown.
In that case, just exit instead of trying to access something with
already closed handles.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Tue, 16 Apr 2013 11:09:38 +0000 (13:09 +0200)]
default.pa: Load switch-on-port-available before udev-detect
We need to pick the right port as early as possible, before the
first volume is picked up. Hence this module needs to be loaded
before the sound card modules are loaded.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
If a card is hot-plugged (which all cards will be when we load
this module before module-*-detect), make sure we don't start up
a sink with an unavailable port selected.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
We know we always serve up LPCM, and exposing this via D-Bus lets Rygel
set the appropriate metadata while presenting the raw (i.e.
non-transcoded) stream to clients.
David Henningsson [Tue, 16 Apr 2013 12:44:05 +0000 (14:44 +0200)]
alsa-mixer: Change profile-sets directory to PA_SRCDIR
A recent patch changed the path files from PA_BUILDDIR to PA_SRCDIR.
Do the same to the profile-set files for consistency (and to fix
out of tree builds).
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The mixer paths are not available in ${builddir} - we need to look in
${srcdir}. This should fix running an in-tree build without make install
as well as alsa-mixer-path-test in make distcheck.
Since the most straightforward way to define PA_SRCDIR was in
Makefile.am, I'm moving PA_BUILDDIR there as well for consistency.
David Henningsson [Fri, 12 Apr 2013 09:56:17 +0000 (11:56 +0200)]
alsa-mixer: Add more jack detection for Headset mic path
On some machines which has a headset jack, the headset mic does not have its own
jack detection. Then we can look at the headphone jack to get some indication:
We know that if the headphone is unplugged, so is the headset mic. The opposite
is not guaranteed since the user might have plugged in a headphone, not a headset.
Also, there exist multi-function jacks which support both Headphone, Mic in headphone jack
and Headset Mic. In this case the jack name will be "Headphone Mic", not "Headphone", so
we need to include this name too.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Tanu Kaskinen [Thu, 28 Mar 2013 15:30:15 +0000 (17:30 +0200)]
sink, source: Really set the fixed latency in set_fixed_latency_within_thread(), always.
The old assumption seemed to be that if a sink or source has the
DYNAMIC_LATENCY flag set, it can never change, so the fixed latency
will always be zero. This assumption doesn't hold with filter sinks
and sources that are moved around.
This fixes a crash with two module-virtual-sink instances on top of
each other, when the bottom one is moved from a sink without dynamic
latency to a sink with dynamic latency. What happened was that first
the bottom virtual sink "updated" (due to this bug nothing was
actually updated) its fixed latency to match the master sink (zero
fixed latency), and then the top virtual sink updated its fixed
latency to match the master sink. The master sink was the bottom
virtual sink, whose fixed latency should have been set to zero, but it
was not, so the pa_sink_set_fixed_latency_within_thread() failed in
the assertion "latency == 0".
Tanu Kaskinen [Thu, 28 Mar 2013 15:30:14 +0000 (17:30 +0200)]
sink, source: Propagate flag changes to filters
An example: let's say that there's an alsa sink and two filter sinks
on top of each other:
alsa-sink <- filter1 <- filter2
With the old code, if filter1 gets moved to another sink, and the
new sink doesn't have the LATENCY and DYNAMIC_LATENCY flags set
(unlike alsa-sink), filter1's flags are updated fine in the moving()
callback, but filter2 is not notified at all about the flag changes.
With this patch, the flag changes are propagated to filter2 too.
David Henningsson [Fri, 5 Apr 2013 19:13:04 +0000 (21:13 +0200)]
pstream: Optimise write of smaller packages
During a stream, most packets sent are either memblocks (with SHM info),
or requests for more data. These are only slightly bigger than the
header.
This patch makes it possible to write these packages in one write
instead of two: a memcpy of just a few bytes is worth saving extra
syscalls for write and poll.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Fri, 5 Apr 2013 14:48:21 +0000 (16:48 +0200)]
socket-server: Make the new channel low-delay, not the listening one
I don't know if it matters a lot, but most certainly it must be
the new channel that's supposed to be made low-delay, not the existing
listening socket, right?
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Mon, 25 Mar 2013 13:56:05 +0000 (14:56 +0100)]
alsa-mixer: Add "Headset Playback|Capture" element
Found on Logitech B530 USB Headset / kernel 3.8. Because we don't
have different path for headset and headphone today, just add
Headset to the existing headphone path.
Peter Meerwald [Tue, 2 Apr 2013 12:59:07 +0000 (14:59 +0200)]
doc: Fix suggested dl-search-path in README
the README suggests to set the following dl-search-path: -p $(pwd)/src/.libs/
N: [lt-pulseaudio] daemon-conf.c: Detected that we are run from the build tree, fixing search path.
E: [lt-pulseaudio] ltdl-bind-now.c: Failed to open module /redacted/pulseaudio/src/.libs/.libs/module-device-restore.so: /home/pmeerw/src/pulseaudio/src/.libs/.libs/module-device-restore.so: cannot open shared object file: No such file or directory
the last part seems superfluous, so -p $(pwd)/src/
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
alsa: skip eld initialization if hctl_handle is NULL
Due to a misconfiguration on my side my hdmi card didn't load with
snd-hda-codec-hdmi but through the fallback mechanism. Pulseaudio
would crash during early because hctl_handle was null, so skip
init_eld_ctls when hctl_handle is null to prevent a crash.
Thanks to David Henningsson for helping me find the underlying issue.
Martin Pitt [Thu, 21 Mar 2013 13:17:33 +0000 (14:17 +0100)]
console-kit, systemd-login: Check for logind, not for systemd
It is possible to build systemd without logind, in which case sd_booted() wo
succeed. Check for /run/systemd/seats to test for logind instead, as
recommended by systemd upstream.
For details, see:
<https://mail.gnome.org/archives/desktop-devel-list/2013-March/msg00092.html
Drop the now unnecessary linking against libsystemd-daemon, and stop linking
the consolekit module to any systemd library.
Peter Meerwald [Thu, 28 Mar 2013 13:46:49 +0000 (14:46 +0100)]
remap: fix check when to apply specialized code path
the specialized code path just duplicate samples, so are only
applicable if the volume in map_table is == 1.0 (or == 0x10000);
don't use them for volumes >= 1.0
compare the integer version of the volume stored in map_table;
comparing floats is ugly (als leads to compiler warnings)
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>